Vivitar Vivicam 40 Users Manual

Downloaded from www.Manualslib.com manuals search engine   
4.3 Self-timer  
 
n Press  Mode  to select 
 
n Press  Shutter      
 
n The self-timer LED will blink and the camera will beep for 10 seconds. 
 
n Camera will capture an image. 
¬ If you want to disable  Self-timer capture  function just  
press  Mode  to select 
 
4.4 Using Flash 
 
     : Automatic Flash mode (flash fires automatically when required by current exposure setting.) 
  
n        : Flash Off 
 
n The working range for the flash...

Downloaded from www.Manualslib.com manuals search engine   
4.5 AVI video capture 
 
n Press  Mode  to select Video Capture function       (The camera will automatically switch to 320 x 240 resolution.) 
         
 
n Press and hold   Shutter  to start a video recording. 
    
n  The camera will beep while video is captured. Note: the 
frame rate will vary depending upon scene complexity.     
              
n To stop movie recording, release the shutter button.  
Recording will also stop when memory is...

Downloaded from www.Manualslib.com manuals search engine   
 
n             The camera will delete last image or movie and               the counter will decrement. 
4.7 Selecting the image resolution 
 
n  :640 x 480 pixels (default setting) 
(The camera should take about 50 Images) 
n  : 320 x 240 pixels 
           (The camera should take about 160 Images)                  
4.8 Selecting a shooting environment 
 
n           : Outdoor 1 (Default setting. Use this setting for taking images outdoors on...

Downloaded from www.Manualslib.com manuals search engine 5. Installing Driver and Utility Software 
5.1 Computer System Requirements 
 
Please verify your PC meets the system requirements before 
installing the software: 
 1. Windows 98SE, ME, 2000, XP (Service Pack 1 if USB 2) 
 2. Pentium 300 MHz, or higher CPU 
 3. CD-ROM drive and USB port 
 
Note: The camera connects to your computer in two ways: 
1) As a USB mass storage device. This is the most common 
mode for transferring images from camera to...

Downloaded from www.Manualslib.com manuals search engine 3. To display the list of languages available, click on the  
  down arrow and highlight your selection. 
  
Click  OK  to proceed to next step. 
4. Your computer will display as follows:  
Click  Next  and follow setup procedure. 
 
 
 
 
 
    

Downloaded from www.Manualslib.com manuals search engine   5.3 Installation of ArcSoft Application Software 
 
1. Insert the CD installation disk into your CD-ROM drive. 
2. The following Window will appear:  
  
 
Click on the software title you wish to install. 
 
 
 
 
 
 
 
 
 
 
   

Downloaded from www.Manualslib.com manuals search engine 6.Transferring Images To Your Computer  
 
Once you have driver and utility software installed,  
you may download (transfer) your images to your computer. 
 
6.1 Connecting Vivicam to your Computer 
 
Use the USB cable to connect the camera to your computer. 
          
      VIVICAM10              Computer 
 
Connect one end of the USB cable to an available USB port on your computer. Connect the other end of the USB cable to the USB connector on...

Downloaded from www.Manualslib.com manuals search engine   Look for a new “removable disk” icon. This “removable disk” is actually the memory in your camera. Typically, the camera will be assigned drive letter “e”, or higher. Double click on the 
Removable Disk icon and locate the DCIM folder.  
 Double click on the DCIM folder to open it to find another folder named 100media. Double click to open this folder. Your recorded images and movie clips will be inside this folder. Still images will be JPG files...

Downloaded from www.Manualslib.com manuals search engine 7. PC/Web Camera Functionality 
 
PC users can connect the camera to their PC and use 
it as a PC camera. 
1. First, make sure you have installed the driver. 
2. Turn on the camera. Press and hold the Select button until the LCD panel displays:  . 
3. Keep pressing the Select button and then connect the 
USB cable to Vivicam and to your PCs USB port. 
4. Release the Select button after you hear a beep from 
camera which means the PC cam function is...