Vivitar Vivicam 3945s Users Manual

							Downloaded from www.Manualslib.com manuals search engine EN-41
User’s Manual >>Slideshow Display
The slideshow function enables you to play back your images automatically in
sequential order. This is very useful and entertaining feature for reviewing
recorded images and for presentations.
1. Slide the mode switch to [ 
 ].
2 . Press the 
 button to enter [PLAY] menu.
3. Select [SLIDE SHOW] with the S/T/W/
Xbuttons, then press the OK button.
4 . Use the S /T buttons to set the slideshow
interval, then press the OK button.
The slide show starts.
Each video clip is presented by the
first frame of the video clip.
To stop the slide show display, press the OK button.
Resizing an Image
You can change the image size of a captured image to one of the following sizes:
2560 x 1920 pixels, 2048 x 1536 pixels, 1280 x 960 pixels and 640 x 480 pixels.
1. Slide the mode switch to [ 
 ].
2. Use the W / X buttons to select the
desired image you want to resize.
3. Press the 
 button to enter [PLAY]
menu.
4. Select [RESIZE] with the S/T/W/X
buttons, then press the OK button.
5. Use the S/T buttons to select the
desired setting, then press the OK
button to confirm.
SLIDE SHOW
BACK :SET :
3 SEC
5 SEC
7 SEC
9 SEC
RESIZE
SELECT IMAGE :SET :
2560x1920
2048x1536
1280x960
640x480
1/ 5  
						

							Downloaded from www.Manualslib.com manuals search engine EN-42
Digital Camera >>MOVIE MODE
Recording Video Clips
1. Press the POWER button to turn on the
ViviCam 3945s.
2. Slide the mode switch to [ 
 ].
3. Compose the image with the zoom
button, if desired.
Optical zoom should be set while
composing the scene.
Optical zoom cannot be used during
movie capture.
4. Press the shutter button to start
recording.
5.  Press the shutter button again to stop
recording.
The flash and self-timer cannot be used in [] mode.While a video is being recorded to an SD card, do not open the battery/
SD card cover, nor remove the battery or SD card. Doing so might
damage the SD card or destroy the data.
VGA  
						

							Downloaded from www.Manualslib.com manuals search engine EN-43
User’s Manual >>Playing Back Video Clips
1. Slide the mode switch to [  ].
2. Use the W/X buttons to go through the
images until the video clip you want to
play back is displayed.
To view the previous image, press
the W button.
To view the next image, press the X
button.
3. Press the shutter button to start playing
back a video clip.
To pause or resume video playback, press the shutter button.
To stop playback, press the OK button.
Use the T button to start fast-reverse playback.
Use the S button to start fast-forward playback.
The zoom function cannot be activated while playing back video clips.To play back video clips on the computer, we recommend you to use
Windows Media Player 9.0 (WMP 9.0).  You can download WMP version
from the website at www.microsoft.com.
Pressing the  button in video playback mode changes the LCD display
in the sequence of: Indicators on 
J JJ J
JIndicators off.
100-0001
:SHUTTER
VGA  
						

							Downloaded from www.Manualslib.com manuals search engine EN-44
Digital Camera >>PLAYBACK MODE - ADVANCED FUNCTIONS
Playing Back Images/Video Clips on TV
You can also play back your images and videos on a TV screen. Before
connecting to any device, make sure to select NTSC/PAL system to match the
video output system of the video equipment you are going to connect to the
digital still ViviCam 3945s. It is recommended you use an AC power adapter
while playing back recorded images and videos on TV.
1. Slide the mode switch to [ 
 ].
2. Connect one end of the A/V cable to
the conversion adapter terminal of the
ViviCam 3945s.
If you use the conversion adapter to
connect the A/V cable, insert the
conversion adapter into the
conversion adapter terminal of the
ViviCam 3945s first, and then connect
one end of the A/V cable to the A/V
terminal of the conversion adapter.
3. Connect the other end to the A/V input
socket of the TV set.
4. Turn the TV and digital still ViviCam
3945s on.
5. Play back the still images/video clips.
The method of operation is the same
as playing back still images and video
clips on the digital still ViviCam 3945s.  
						

							Downloaded from www.Manualslib.com manuals search engine EN-45
User’s Manual >>Deleting Images/Video Clips
Use this function to delete one or all images/video clips stored in the internal
memory or memory card. Please note that the deleted images or video clips
cannot be recovered.
Immediate Erasure (Quick Delete Function)
The quick delete function enables you to delete the last image during capture.
1. Slide the mode switch to [
] or [].
2. Press the 
 button.
The last image and delete message
appears on the screen.
3. Use the W /X buttons to select [YES],
then press the OK button.
If you wish to cancel the deletion,
select [NO].
 To delete a single image/video clip in playback mode
1. Slide the mode switch to [ 
 ].
2 . Use the W /X buttons to select the image
you want to delete.
3. Press the 
 button.
4. When the delete message appears, use
the W/X buttons to select [YES], then
press the OK button.
If you wish to cancel the deletion,
select [NO].
To delete all images/video clips at once
1. Slide the mode switch to [ 
 ].
2 . Press the 
 button to enter [PLAY] menu.
Select [DELETE ALL] with the S/T/W/ X
buttons, then press the OK button.
3 . To confirm the deletion of all images, use
the S/T buttons to select [YES], then
press the OK button.
The message “NO PICTURE” appears
on the LCD screen.
Protected images cannot be deleted.
NO YES
DELETE ALL
BACK :SET :
YES
NO  
						

							Downloaded from www.Manualslib.com manuals search engine EN-46
Digital Camera >>Protecting Images/Video Clips
The PROTECT function allows you to set the data to read-only to prevent
images from being erased by mistake.
1. Slide the mode switch to [ 
 ].
2. Press the 
 button to enter [PLAY]
menu. Select [PROTECT] with the S/
T/W/X buttons, then press the OK
button.
3 . Use the S/T buttons to select the desired
setting, then press the OK button.
[ONE IMAGE]: Protect one image/
video.
[ALL IMAGES]: Protect all images/
videos (at once).
[EXIT]: Exit from this menu.
4. Use the S/T buttons to select [LOCK],
then press the OK button.
Press the  button to return to the
playback mode.
The protect icon  is displayed on
each protected video and image.
Canceling protection
To cancel protection for an image or video, display the image or video for which
you wish to remove the protection.
1. Perform the above steps 1~3.
2. Use the S/T buttons to select [UNLOCK], then press the OK button.
PROTECT
BACK :SET :
ONE IMAGE
ALL IMAGES
EXITLOCK
UNLOCK  
						

							Downloaded from www.Manualslib.com manuals search engine EN-47
User’s Manual >>Changing the ViviCam 3945s Startup Screen
This feature lets you specify one of your recorded images as your startup
screen, which will be displayed on the monitor whenever you turn on the ViviCam
3945s.
1. Slide the mode switch to [ 
 ].
2. Press the 
 button to enter [PLAY]
menu.
3. Use the S/T/W/X buttons to select
[CHANGE LOGO],  then press the OK
button.
4. Use the W/Xbuttons to select the
desired image you want to set as the
startup screen.
5 . Use the S/T buttons to select [EXECUTE ] ,
then press the OK button to confirm.
The new screen will welcome you the
next time you turn on the ViviCam
3945s.
CHANGE LOGO
SELECT IMAGE :SET :
EXECUTE
CANCEL
SELECT ITEM:EXIT:
ENTRY:CHANGE LOGOEXECUTE
LOGO
PLAYSETUP
SELECT PAGE:  
						

							Downloaded from www.Manualslib.com manuals search engine EN-48
Digital Camera >>AUDIO MODE
The digital still ViviCam 3945s also allows you to record and play back voice files
anytime and anywhere.
Recording Voice Files
1. Press the POWER button to turn on the
ViviCam 3945s.
2. Slide the mode switch to [ 
 ].
3. Press the 
 button to access Audio
mode.
4. Press the shutter button to start
recording.
A   indicator is displayed on the
screen.
Recording stops when you press the
shutter button again.
:STOP
AUD_0001
AUD_0002
W :VOLUME-
T  :VOLUME+ RECORD!
AUD_0003
Playing Back a Voice File
1. Perform the above steps 1~3.
 Voice playlist appears on the screen.
2 . Use the S/T buttons to select the voice
file you want to play.
3. Press the OK button to start playback
of the voice file through the ViviCam
3945s speaker.
To pause playback, press the  button.
To resume playback, press the OK button.
To stop playback, press the OK button again.
AUD_0011
W :VOLUME-
T  :VOLUME+ :PAUSEPLAY!
:STOP  
						

							Downloaded from www.Manualslib.com manuals search engine EN-49
User’s Manual >>
   Button operations in Audio mode
Deleting a Voice File
1 . Make sure the ViviCam 3945s is in Audio
mode.
2 . In the Audio mode, use the S/T buttons
to select the voice file you want to
delete.
3. Press the 
 button to delete the
selected voice file.
4 . When the delete message appears, use
the W/X buttons to select [YES], and
then press the OK button.
If you wish to cancel the deletion,
select [NO].
:RECORD
AUD_0001
AUD_0002
:PLAYW :VOLUME-
T  :VOLUME+ SELECT FILE!
AUD_0003NO YES
To PressFunctional Description
Power on/offPOWERPress the POWER button to
turn on/off the ViviCam 3945s.
Start/stop voice recordingShutterPress the shutter button to start
button or stop recording.
Select previous/next voice fileS / TUse the S/T buttons to choose
previous or next file and then
press the OK button to play.
Start/stop playback of a voice fileOKPress the OK button to start or
stop playback of a voice file
Adjust audio volumeZoom Press T or W to increase or
buttondecrease audio volume.
Pause playback of a voice file
Press the  button to pause
playback of a voice file.
Delete a voice file
Press the   button to delete
voice files.  
						

							Downloaded from www.Manualslib.com manuals search engine EN-50
Digital Camera >>
TRANSFERRING FILES FROM YOUR
DIGITAL STILL VIVICAM 3945S TO
COMPUTER
After using USB cable to establish a USB connection between the ViviCam
3945s and your computer, you can use your computer to share recorded images/
video clips/voice files with your family or friends via e-mail or post them on the
Web. In order to do this, you must install the USB driver onto your computer first.
Before you starts to install the USB driver, you need to check your system
according to the following table.
System Requirements System Requirements
(Windows) (Macintosh)
CPUPentium 166 MHz processor PowerPC G3/G4
or higher
OSWindows 98/98SE/ME/ OS 9.0 or higher
2000/XP
Memory32MB 32MB
(64MB RAM recommended) (64MB RAM recommended)
Free Space on128MB hard disk space 128MB hard disk space
Hard Disk
Required DevicesA CD-ROM drive A CD-ROM drive
An available USB port An available USB port
DisplayColor Monitor (800x600,Color Monitor (800x600,
24-bit or higher24-bi t  o r  h igher
recommended) recommended)