Vivitar Vivicam 3745 User Manual

 30
E
Using the self-timer
The self-timer duration is 10 seconds. After the activation of the self-timer by pressing the shutter button,
the self-timer lamp starts blinking slowly for 7 seconds and then blinking faster for the rest of 3 seconds.
With this design, you can get in the frame when taking group pictures.
1.Secure the camera to a tripod or place it on a stable surface.
2. Turn the camera on by sliding the 
 switch.
3. Set the mode dial to the   mode or the  mode.
4. Press the  button.
The...

 31
E
Using the macro mode
Use the macro mode to shoot a close-up of the subject, such as flowers or insects.
1. Turn the camera on sliding the 
 switch.
2. Turn the mode dial to the  mode or the  mode.
3. Press the  button.
The 
 icon appears on the LCD monitor and the arrow
points to the macro icon on the status LCD.
4. Compose the picture.
5. Press the shutter button down halfway, then press it the rest
of the way down.
To cancel macro photography at any time, press the 
button again.
•When shooting...

 32
E
Using the flash
The flash is designed to function automatically in dark places. You can take a picture with the suitable
flash setting according to the different conditions. If you change the flash setting, the camera will re-
main in that setting even when the camera is turned off.
1. Turn the camera on by sliding the 
 switch.
2. Turn the mode dial to the 
 mode or the  mode.
3. Press the    button located on top of the camera repeatedly
until the arrow points to your desired flash mode.
4. Press...

 33
E
The camera provides 4 flash modes: Auto Flash (default), Red-eye Reduction, Forced Flash and Flash
Off , which can be changed cyclically by pressing the flash button on top of the camera. The table
below tells you how to choose the appropriate flash mode while shooting.
Flash mode Description
[ 
 ] Auto Flash The flash fires automatically according to the ambient conditions.Select this mode for general photography.
[ 
 ] Red-eye Reduction The flash emits a pre-flash before the main flash flashes,...

 34
E
Taking pictures manually
You can take pictures by manually adjusting conditions such as white balance, EV compensation and
sharpness. For white balance, EV compensation or sharpness information, refer to WHITE BALANCE,
EV COMPENSATION or SHARPNESS in Manual Record menu.
To take pictures manually:
1. Turn the camera on by sliding the 
 switch.
2. Turn the mode dial to the    mode.
3. Press the  button on top of the camera.
4. Move to WHITE BALANCE, EV COMPENSATION or SHARP-
NESS by using the 
/...

 35
E
In the  mode, you can view, magnify, delete your images or play video clips back. This mode even
provides thumbnail images display and slide show, allowing you to quickly search for the image that
you want or play the images back one by one automatically.
Viewing images
1. Turn the camera on by sliding the  switch.
2. Turn the mode dial to the  mode.
3.Select the image that you want to view by using the  
/ button.
To view the previous image, press the  button.
To view the next image, press the...

 36
E
Zooming images in and out
This mode allows you to enlarge your image on the selected portion of the image with 4X magnification
to check for small details.
1. Turn the mode dial to the 
 mode with the camera powered on.
2.Select the image that you want to view by using the  / 
button.
3. Enlarge the image by pressing the  button.
Pressing the  button once magnifies the image to 2X.
Pressing it again magnifies the image to 4X. When enlarg-
ing the recorded image, you will see a red frame with a
red...

 37
E
Displaying thumbnail images
This function allows you to view 9 thumbnail images on the LCD monitor at the same time, which can
quickly search for the image that you want.
1. Turn the mode dial to the 
 mode with the camera powered on.
2. Press the ENTER button once.
The image information appears on the LCD monitor.
3. Press the ENTER button again.
Nine thumbnail images show on the LCD monitor if the
image number reaches up to nine frames.
To view a full-size image, press the ENTER button after...

 38
E
Slideshow display
Slideshow function enables you to play your images back in order automatically, which is very useful
and convenient for checking recorded images and for presentations.
1.Turn the mode dial to the 
 mode with the camera powered on.
2. Press the  button and move to SLIDE SHOW by using the
/  button.
3.Set the playback interval by using the  /  button and press
the ENTER button.
The slideshow display starts. You can view the image dis-
played on the LCD monitor one by one with the...

 39
E
Deleting images
You can delete one image/video clip or all images/video clips at a time depending how long you press
the  button.
To delete one image at a time:
1. Select the image/video clip you want to delete by using the
/  button. Press the  button.
2.Select [YES], and then press the ENTER button. The next
image/video clip appears.
If you want to cancel the deletion, select [NO].
3. Continue the deletion if necessary. If all images are deleted,
[ L NO IMAGES] pops up. To exit, turn the mode...