Vivitar Vivicam 3715 User Manual
Here you can view all the pages of manual Vivitar Vivicam 3715 User Manual. The Vivitar manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
40
E
Quick view
By enabling quick view, you can temporarily view the image on the LCD monitor
right after you take a picture. After a temporary preview, the camera returns to
mode automatically. To enable quick view, first press the button. Then select
[On] by using the
/ button and press OK.
LCD brightness
This option adjusts the brightness of the LCD monitor. To adjust the LCD brightness,
first press the button. Then increase or decrease the LCD brightness depend-
ing on what you need by using...](http://img.usermanuals.tech/thumb/5165/38425/w300_Vivitar_Vivicam_3715-40.png "Page 41
40
E
Quick view
By enabling quick view, you can temporarily view the image on the LCD monitor
right after you take a picture. After a temporary preview, the camera returns to
mode automatically. To enable quick view, first press the button. Then select
[On] by using the
/ button and press OK.
LCD brightness
This option adjusts the brightness of the LCD monitor. To adjust the LCD brightness,
first press the button. Then increase or decrease the LCD brightness depend-
ing on what you need by using...")
40 E Quick view By enabling quick view, you can temporarily view the image on the LCD monitor right after you take a picture. After a temporary preview, the camera returns to mode automatically. To enable quick view, first press the button. Then select [On] by using the / button and press OK. LCD brightness This option adjusts the brightness of the LCD monitor. To adjust the LCD brightness, first press the button. Then increase or decrease the LCD brightness depend- ing on what you need by using...
Page 42
41 E Playback menu Use the Playback menu to create an on-camera slide show, or transfer images from internal memory to a memory card. You can also use the Playback menu to protect an image, delete all images at once, or adjust the LCD brightness. To access the Playback menu, turn the mode dial to mode and then press the button. Scroll through the menu options by using the / button. Protect Refer to Protecting one image/video clip in PLAYBACK MODE. Delete all Refer to Delete images/video clips in...
Page 43
![Page 43
42
E
Setup menu
You can select your preferences for the camera settings in SET-UP mode. Turn the
mode dial to SET-UP mode and navigate to the option you wish to configure by
using the
/ button.
Format
This option formats the internal memory (or
memory card) and erases all stored images and
data. To perform the format function, first press
the
button. Then select [Yes] by using the /
button and press OK. A progress bar
displays, showing the progress of formatting.
Beep
The camera makes a sound...](http://img.usermanuals.tech/thumb/5165/38425/w300_Vivitar_Vivicam_3715-42.png "Page 43
42
E
Setup menu
You can select your preferences for the camera settings in SET-UP mode. Turn the
mode dial to SET-UP mode and navigate to the option you wish to configure by
using the
/ button.
Format
This option formats the internal memory (or
memory card) and erases all stored images and
data. To perform the format function, first press
the
button. Then select [Yes] by using the /
button and press OK. A progress bar
displays, showing the progress of formatting.
Beep
The camera makes a sound...")
42 E Setup menu You can select your preferences for the camera settings in SET-UP mode. Turn the mode dial to SET-UP mode and navigate to the option you wish to configure by using the / button. Format This option formats the internal memory (or memory card) and erases all stored images and data. To perform the format function, first press the button. Then select [Yes] by using the / button and press OK. A progress bar displays, showing the progress of formatting. Beep The camera makes a sound...
Page 44
![Page 44
43
E
Reset to default
If you wish to restore all camera settings to their original status, select this option
and then press the
button. Select [Yes] by using the / button and then
press OK.
The table below shows the default setting for each item.
Item Description
Image size 2048x1536 pixels
Image quality Fine
Flash Auto
LCD brightness 0
Quick view On
White balance Auto
EV compensation 0.0
Slide show delay 3 seconds
Auto power off 3 minutes
Beep On
Date type
You can select the date type that is...](http://img.usermanuals.tech/thumb/5165/38425/w300_Vivitar_Vivicam_3715-43.png "Page 44
43
E
Reset to default
If you wish to restore all camera settings to their original status, select this option
and then press the
button. Select [Yes] by using the / button and then
press OK.
The table below shows the default setting for each item.
Item Description
Image size 2048x1536 pixels
Image quality Fine
Flash Auto
LCD brightness 0
Quick view On
White balance Auto
EV compensation 0.0
Slide show delay 3 seconds
Auto power off 3 minutes
Beep On
Date type
You can select the date type that is...")
43 E Reset to default If you wish to restore all camera settings to their original status, select this option and then press the button. Select [Yes] by using the / button and then press OK. The table below shows the default setting for each item. Item Description Image size 2048x1536 pixels Image quality Fine Flash Auto LCD brightness 0 Quick view On White balance Auto EV compensation 0.0 Slide show delay 3 seconds Auto power off 3 minutes Beep On Date type You can select the date type that is...
Page 45
![Page 45
44
E
Date imprint
If you set imprint function, your image will be displayed with date on it. To enable
this function, first press the
button. Then select [Yes] by using the / button
and press OK.
Video out
You can view your images on a TV. Remember to select correct video output type
according to where you locate. Otherwise, there will be white lines on a stored
image. To set this option, first press the
button. Then select the / button
and press OK.
[NTSC] : select this format when located in...](http://img.usermanuals.tech/thumb/5165/38425/w300_Vivitar_Vivicam_3715-44.png "Page 45
44
E
Date imprint
If you set imprint function, your image will be displayed with date on it. To enable
this function, first press the
button. Then select [Yes] by using the / button
and press OK.
Video out
You can view your images on a TV. Remember to select correct video output type
according to where you locate. Otherwise, there will be white lines on a stored
image. To set this option, first press the
button. Then select the / button
and press OK.
[NTSC] : select this format when located in...")
44 E Date imprint If you set imprint function, your image will be displayed with date on it. To enable this function, first press the button. Then select [Yes] by using the / button and press OK. Video out You can view your images on a TV. Remember to select correct video output type according to where you locate. Otherwise, there will be white lines on a stored image. To set this option, first press the button. Then select the / button and press OK. [NTSC] : select this format when located in...
Page 46
45 E USB Cable Computer Computer TV PCMCIA Adapter SD Card Reader SD Card Reader VIDEO Cable SD Memory Card Printer CONNECTING THE CAMERA TO OTHER DEVICES
Page 47
46 E CAMERA SPECIFICATIONS Item Description Image sensor 3.3-Megapixel CCD Image quality Super-Fine/Large (2048 x 1536 pixels)Fine/Medium (1024 x 768 pixels) Normal/Small (640 x 480 pixels) Recording media 8MB internal memory; SD memory card (optional) (up to 256MB capacity) Lens Fixed focal length: 7.9mm Focusing range: Landscape---1.9m~infinity;Portrait---0.9m~1.9m; Macro---0.55m~0.9m F-number: 3.5 LCD monitor 1.5 color TFT LCD monitor Self-timer 10-second delay Zoom 2X digital zoom Exposure...