Vivitar Vivicam 355 Users Manual

							206. Select the Arcsoft programs you wish to install and click Next button
7. Change the name of the program folder if necessary and click Next button
8. Files will be copied to your computer
9. Click Finish button to install camera drivers 
						

							21Install Camera drivers - 10. Click Next button to start the camera driver installation
11. When installation is complete, click Finish button to restart your computer
12. After the computer is restarted, power up your camera13. Switch the Mode dial to PC mode14. Connect the camera and computer with the USB cord15. Removable Disk will automatically be installed in your computer. Several screens will      appear momentarily.16. When the Removable Disk installation is complete, press the MENU, DOWN, ENTER      buttons on the camera to select Silent Video mode17. Video driver will be installed in your computer18. The camera driver installation is complete.
Note: In rare occasions, the camera driver may possibly conflict other USB devices in yourcomputer system.
Check your image files 
						

							22Check the video driver 1. Press MENU, DOWN, ENTER buttons on the camera to select Silent Video mode2. Search through Start>Settings>Control Panel>System>Device Manager>ImagingDevices>Vivicam 355 Video Camera
Install Arcsoft programs and camera drivers in Windows 2000/XP OSNote: The graphics shown are based on the user interface in Windows XP
1. Put the program CD-ROM into the CD-ROM drive, it will run automatically2. Select your desired language and click OK button
3. Click Next button 
						

							234. Click Yes button to accept the license agreement
5. Change the Destination Folder by clicking Browse button if necessary and click Next button
6. Select the Arcsoft programs you wish to install and click Next button
7. Change the name of the program folder if necessary and click Next button 
						

							248. Files are being copied to your computer
9. Click Finish button to install camera drivers
Install camera drivers -
10. Click Next button to start camera driver installation
11. Click Continue Anyway button (for Win XP) or Yes button (for Win 2000) when you see          the warning message 
						

							2512. When Setup is complete, click Finish button to restart your computer
13. After your computer is restarted, power up your camera 14. Switch the Mode dial to PC mode15. Connect the camera and computer with the USB cord16. The following screen will appear to signal the Removable Disk has been installed in your      computer. Click Cancel button to move on to video driver installation.
17. Press MENU, DOWN, ENTER buttons on the camera to select Silent Video mode and        wait for the following screen to appear. Select as on the screen and click Next button        to start the video driver installation. 
						

							2618. Click Continue Anyway button (for Win XP) or Yes button (Win 2000) when you see the  
						

							273. Search through Removable disk>Dcim>100cnxnt and double-click on 100cnxnt folder 4. The image files are shown on the right pane
Check the video driver1. Press MENU, DOWN, ENTER buttons on the camera to select Silent Video mode2. Search through Start>Control Panel>System>Hardware>Device Manager>Imaging    devices>Vivicam 355 Video Camera 
						

							28Download images using Photo Studio
NOTE: The graphics shown are based on the user interface in Windows 98SE
1. Search through Start>Programs (“All Programs” for Windows XP) >Vivicam 355     Digital Camera Suite and click PhotoStudio 2000 icon OR double-click the shortcut    created on your computer desktop
2. Search through File and click Select Source icon from the pull-down menu
3. Highlight Vivicam 355 Digital Camera and click Select button. Make sure your camerais in Mass Storage mode and connected to your computer.
4. Search through File and click Acquire icon 
						

							295. Click Disk Folder icon at the bottom to view/change the folder to which the images will     be copied. Default folder is C:\WINDOWS\Desktop\My Photos.
6. Highlight the images you want to save (or click Select All icon to highlight all photos) and