Vivitar Vivicam 2010 Users Manual

Downloaded from www.Manualslib.com manuals search engine  
 
17
10. AVI Capture   
 
You can capture motion-video clips using the AVI capture feature. The image 
is stored in AVI format. The image counter increments by one after movie 
clips are stored. Video clips are captured at a resolution of 320 x 240. The 
movie-clip frame rate will be approximately six frames per second. Movie 
clips are silent. (No audio.) To use the AVI capture mode follow these steps:   
 
Step 1:
 Power on the camera. Press...

Downloaded from www.Manualslib.com manuals search engine  
 
18
11. Continuous Capture   
 
You can capture three images using the continuous capture feature.    When 
you use this mode the image resolution will be 640 x 480. To use the 
Continuous Capture mode follow these steps: 
 
Step 1: 
Power on the camera.    Press the Power/Mode button six times until 
 the “    ” icon appears on the LCD display. 
 
Step 2:
 When the Shutter
 button is pressed, the camera will capture three   
images...

Downloaded from www.Manualslib.com manuals search engine  
 
19
12. Deleting Images   
 
You can delete the last image captured, or you may delete all images in 
memory. 
 
Delete the Last Image    
Step 1:
 Power on camera. Press the Enter button until the “        ” icon   
appears on the LCD display. Then press the enter button to   
delete the last picture in the camera. (Example: 020 will change to 019.) 
 
Delete All Images   
 
Power on the camera and press the button until the icon “        ”...

Downloaded from www.Manualslib.com manuals search engine  
 
20 where high contrast and dark shadows are unavoidable. 
3.  Minimum focus distance. Make sure your subject is not too close. The 
minimum focus distance is three to four feet (one meter.) 
4.  Position your primary subject in the center of the image. The camera 
focuses best in the center of the image. The edges of your images are 
softly focused, giving a nice soft perimeter effect to each image. 
 
 
 
 
 
 
 
 
 
 
   

Downloaded from www.Manualslib.com manuals search engine  
 
21
 
13. 
Installing Camera Driver and Software 
 
a. Turn on your computer. 
b. Insert the installation CD-ROM drive and the installion CD menu should 
appear. If the menu does not appear, double-click the CD drive icon in my 
computer or run D:\Autorun.exe to open the setup screen (assuming that 
your CD-Rom drive is drive D:). 
 
c. When you see the following: 
 
 
 
 
 
 
 
 
 
 
Camera Driver: 
Click on the “Camera Driver” button to...

Downloaded from www.Manualslib.com manuals search engine  
 
22 User manual: 
Click “User Manual” to read the user manual. (You should have Adobe 
Acrobat Reader to open the file.). It is included on the CD. 
 
Adobe Acrobat: 
Click this box and follow the prompts to install Adobe Acrobat Reader only if 
it isn’t present on your system. 
 
Arcsoft Suite: 
Click this box then follow the prompts and click the next steps to complete 
the installation. 
 
 
 
 
 
 
 
 
 
 
 
 
 
   

Downloaded from www.Manualslib.com manuals search engine  
 
23
14. Uninstalling Software and Camera Driver 
The following instructions guide you to uninstall (remove) software from your   
computer. 
 
Uninstalling Software 
1. Click “Start” from the task bar and choose “Settings->”Control Panel”.   
2. (For Windows XP:”Start”->”Control Panels”) 
3. Double click “Add/Remove Programs”. 
4. Select the program to be uninstalled:”Arcsoft Software Suite”. 
5. Click “Remove Program” (For Windows...

Downloaded from www.Manualslib.com manuals search engine  
 
24
15. Downloading Images to a Computer 
For Windows 98/ME customers: 
Please install the camera driver before connecting to your computer for the 
first time. 
1. Turn the camera and computer on, and then connect the camera to the 
computer with the included USB cable. 
2. “USB Mass Storage device” appears on the computer screen. 
 
For Windows XP: 
A dialogue box with options appears as 
shown on the Right side. 
The options are Play,...

Downloaded from www.Manualslib.com manuals search engine  
 
25 Click once on a file to highlight it and press “Ctrl+A” on your keyboard to 
select all    files in the same window. Then press “Ctrl+C” to copy images and 
“Ctrl+V” to paste and save them to a folder on your computer. You may also 
“Drag and Drop them to a folder on your desktop to save them after   
highlighting as above. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   

Downloaded from www.Manualslib.com manuals search engine  
 
26
16. Arcsoft PhotoImpression 5 
Arcsoft PhotoImpression 5 is a complete digital image editing application   
designed with real people in mind. The Easy-to-Use HELP menu, 
user-friendly interface, and complete image editing functionality, give users 
the ability to organize view, enhance, edit, print and share photos. Click on 
“Start”Æ “Program”Æ “ArcSoft Software Suite” to PhotoImpression 5 and 
you will see a window as below....