Vivitar Vivicam 2010 Users Manual

							Downloaded from www.Manualslib.com manuals search engine 1 
   
 
 
Vivicam 2010 User manual 
 
 
 
 
 
 
 
English 20100001 
   
						

							Downloaded from www.Manualslib.com manuals search engine  
Contents
1 Introduction------------------------------------------------------------- 1
 
Overview-----------------------------------------------------------------1
 
Warnings and Precautions------------------------------------------1
 Package Contents-----------------------------------------------------3
 
System Requirements------------------------------------------------4
 Camera Features------------------------------------------------------5
2 
Inserting the Batteries------------------------------------------------6
3 
Insert/Remove SD/MMC Memory Cards------------------------8
4 Capturing Images----------------------------------------------------- 9
 
Power On the Camera-----------------------------------------------9
 
Power Off the Camera------------------------------------------------9
5 
Camera Status Icons-------------------------------------------------10
6 Display Information and flows--------------------------------------11
7 
Capture an Image-----------------------------------------------------15
8 
Using Flash-------------------------------------------------------------16 
9 Self-Timer--------------------------------------------------------------- 17
10 
AVI Capture-------------------------------------------------------------18 
11  Continuous Capture-------------------------------------------------- 19 
12 
Deleting Images--------------------------------------------------------19 Delete the Last Image------------------------------------------------19 
 Delete All Images------------------------------------------------------19   
						

							Downloaded from www.Manualslib.com manuals search engine    
Techniques for Capturing the Best Images----------------------
21 
13 
Installing Camera Driver and Software---------------------------23 
14 
Uninstalling Software ------------------------------------------------23 
 
Uninstalling Camera Driver -----------------------------------------23 
15 
Downloading Images to Your Computer-------------------------24
 
For Windows 98/me customers------------------------------------24 
 For Windows XP-------------------------------------------------------24 
 For Windows 2000/me/98-------------------------------------------24 
16 Arcsoft PhotoImpression 5------------------------------------------26 
17 Arcsoft VideoImpression 2------------------------------------------28 
18 Using the Camera In PC-Cam Mode-----------------------------31 
19 Checking the Connection of Your Camera----------------------32 
20 Internet Video Conferencing----------------------------------------33 
21 Using the camera with NetMeeting--------------------------------34 
22 Specifications-----------------------------------------------------------35 
23 Appendix A--------------------------------------------------------------36 
   
						

							Downloaded from www.Manualslib.com manuals search engine  
 
 
WA R N I N G  
 
When the battery icon is blinking, download the pictures to 
your computer immediately before changing the batteries. A 
delay could result in the loss of your images if the batteries 
become depleted.
   
						

							Downloaded from www.Manualslib.com manuals search engine 1 
 
1. Introduction   
 
Overview  
 
Thank you for purchasing your digital camera. It can capture digital images, 
short video-clips (continuous shooting mode), and it can also serve as a 
PC/Web camera.   The camera is equipped with 8 MB of memory to store 
your images and movie clips. You may download your images and movie 
clips to your computer using the USB cable and included software. 
 
Warnings and Precautions   
 
FCC STATEMENT - 
 
This device complies with Part 15 of the FCC Rules. Operation is subject to 
the following two conditions: 
1. This device may not cause harmful interference, and 
2. This device must accept any interference received, including interference   
that may cause undesired operation. 
 
Note:
 This equipment has been tested and found to comply with the limits 
for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits 
are designed to provide reasonable protection against harmful interference 
in a residential installation.    This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in accordance 
with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:   
						

							Downloaded from www.Manualslib.com manuals search engine  
 
2
 
1. Reorient or relocate the receiving antenna 
2. Increase the separation between the equipment and receiver 
3. Connect the equipment into an outlet on a circuit different from that to   
which the receiver is connected 
4. Consult the dealer or an experienced radio/TV technician for help. 
 
Use of shielded cable is required to comply with Class B limits in Subpart B 
of Part 15 of the FCC rules. Do not make any changes or modifications to 
the equipment unless otherwise specified in the manual. If such changes or 
modifications should be made, you could be required to stop operation of the 
equipment. 
 
GENERAL WARNINGS – 
 
Do not use batteries other than those specified for use with the camera. The 
use of unsuitable batteries may result in the batteries splitting or leaking and 
causing a fire, injury, or soiling of the battery compartment. 
 
When placing batteries in the camera, check the polarity of the batteries 
(- and +) to ensure proper orientation. Incorrect polarity may result in the 
batteries splitting or leaking and causing a fire, injury, or soiling of the battery 
compartment. 
 
Remove the batteries if the camera will not be used for an extended period 
of time. The batteries may leak and cause a fire, injury or soiling of the   
						

							Downloaded from www.Manualslib.com manuals search engine  
 
3 battery compartment. If the batteries leak clean and wipe the battery 
compartment carefully and install new batteries.    Wash your hands carefully 
if you touch the battery fluid. Please note that when you remove the batteries 
your images will be lost from the camera memory. 
 
WARNING:
 Handling the USB cable on this product may expose you to lead, 
a chemical known to the State of California to cause birth defects or other 
reproductive harm.    Wash your hands after handling. 
 
TRADEMARK INFORMATION - 
 
Microsoft® and Windows® are U.S. registered trademarks of Microsoft 
Corporation. 
Pentium® is a registered trademark of Intel Corporation. Other names and 
products may be trademarks or registered trademarks of their respective 
owner. 
 
 
Package Contents   
1. Camera 
2. USB cable 
3. Software 
4. User’s Manual 
5. Two AA batteries 
6. Hand strap   
						

							Downloaded from www.Manualslib.com manuals search engine  
 
4 Note:
 Included components may vary, as specified by local retailers and 
locations. Check with your retailer for specifics. 
 
System Requirements   
 
You must use a computer to download the images from your camera. The 
computer that you use must meet the following minimum requirements: 
 
1. Windows Me/2000/XP 
2.  Direct X 8.0, or higher 
3.  128 MB RAM 
4.  60 MB hard disk space available 
5.  Available USB port 
6. CD-ROM drive 
   
						

							Downloaded from www.Manualslib.com manuals search engine  
 
5
Camera Features   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   
						

							Downloaded from www.Manualslib.com manuals search engine  
 
6
2. Inserting the Batteries   
 
Step 1: Open the battery door by sliding it down and 
then move it outwards from the camera body.   
Step 2:
 Insert two AA batteries with the polarity as 
       shown: 
Step 3:
 Close the battery cover. 
 
Warning:    Do not open the battery door when the camera is powered ON.   
This will cause all images in memory to be lost immediately.    If you open the 
battery door when the camera is OFF (when changing the batteries) you 
must close the door within thirty (30) seconds or your images will be erased 
from memory. 
 
Notes: 
 
1.  Always download your images to your computer soon after you have   
captured them. Never assume your images will be retained for more 
than 
three or four days. If the batteries are depleted, your images will be lost.
 
2.  If you must change the batteries, make sure the camera is OFF and then 
change the batteries within 30 seconds. 
3.  If you will not use the camera for a long time (several days, or more)   
remove the batteries. The batteries will discharge slowly if left in the   
camera. This may cause complete battery discharge as well as loss of   
images. The batteries may corrode if left in the camera for extended   
periods of time.   
4.  Dispose of batteries properly in accordance with local laws and   
regulations. Do not place them in fire.