ViewSonic VX2433wm Manual

ViewSonicVX2433wm 9
Adjusting the Screen Image
Use the buttons on the front control panel to di splay and adjust the OSD controls which display 
on the screen. The OSD controls are explained at  the top of the next page and are defined in 
“Main Menu Controls” on page 11.
Main Menu
with OSD controls
Scrolls through menu options and adjusts the displayed control. Audio Adjust (T) / Contrast  ( S)
Displays the control screen for the highlighted control. Also toggles between two controls on some screens....

ViewSonicVX2433wm 10
Do the following to ad
just the display setting:
1. To display the Main Menu, press button [1].
NOTE:  All OSD menus and adjustment screens  disappear automatically after about 15 
seconds. This is adjustable through the  OSD timeout setting in the setup menu.
2. To select a control to adjust, press SorT to scroll up or down in the Main Menu.
3. After the desired control is se lected, press button [2]. A cont rol screen like the one shown 
below appears.
4. To adjust the control,...

ViewSonicVX2433wm 11
Main Menu Controls
Adjust the menu items shown below by using the up  S and down  T buttons.
Control Explanation
Auto Image Adjust  automatically sizes, centers, a nd fine tunes the video signal 
to eliminate waviness and distortion. Pr ess the [2] button to obtain a sharper 
image.
NOTE:  Auto Image Adjust works with most common video cards. If this 
function does not work on your LCD display,  then lower the video refresh rate 
to 60 Hz and set the resolution to its pre-set...

ViewSonicVX2433wm 12
Control Explanation
sRGB-This is quickly becoming the industry standard for color management, 
with support being included in many of th e latest applications. Enabling this 
setting allows the LCD display to more accurately display colors the way they 
were originally intended. Enabling the sRGB  setting will cause the Contrast and 
Brightness adjustments to be disabled.
9300K- Adds blue to the screen image for  cooler white (used in most office 
settings with fluorescent...

ViewSonicVX2433wm 13
Control Explanation
Manual Image Adjust  displays the Manual Image Adjust menu.
H./V. Position (Horizontal/Vertical Position)  moves the screen image left or 
right and up or down.
H. Size (Horizontal Size)  adjusts the width of the screen image.
Fine Tune  sharpens the focus by aligning te xt and/or graphics with pixel 
boundaries.
NOTE:  Try Auto Image Adjust first.
Sharpness  adjusts the clarity and focus of the screen image.
Dynamic Contrast  allows the user to turn the...

ViewSonicVX2433wm 14
Control Explanation
Display Mode provides two color space modes. The factory setting for this 
product is RGB mode.
RGB Mode  sets color space to RGB for PC timing mode.
YUV Mode  sets color space to YUV for HD timing mode.
ECO Mode  provides the lower power consum ption by reducing the brightness. 
Standard:  The default br ightness setting.
Optimize:  Decreases the brightness by 25 %.
Conserve:  Decreases the brightness by 50 %.
Setup Menu  displays the menu shown below:
Language...

ViewSonicVX2433wm 15
Control Explanation
Sleep Set up the auto power off time for  30/45/60/120 minutes. (Its inactive in 
PC mode only)
Memory Recall  returns the adjustments back to fa ctory settings if the display is 
operating in a factory Preset Timing Mode  listed in the Specifications of this 
manual.
Exception:  This control does not affect cha nges made with the Language Select 
or Power Lock setting.
 

ViewSonicVX2433wm 16
Other Information
Specifications
1 Macintosh computers older than G3 require a ViewSonic® Macintosh adapter. To order an adapter, contact
ViewSonic. LCD
Ty p e
Color Filter
Glass Surface 24” (full 23.6 wide viewable diagonal area),
TFT (Thin Film Transistor), Active Matrix WUXGA LCD,
0.2715 mm pixel pitch
RGB vertical stripe
Anti-Glare
Input Signal Video Sync RGB analog (0.7/1.0 Vp-p, 75 ohms)
HDMI/DVI-D (TMDS digital, 100ohms)
Composite Sync, Separate Sync, Sync on Green
f
h:24-82...

ViewSonicVX2433wm 17
Troubleshooting
No power
• Make sure power button (or switch) is ON.
• Make sure A/C power cord is secu rely connected to the LCD display.
• Plug another electrical device (l ike a radio) into the power outlet to verify that the outlet is
supplying proper voltage.
Power is ON but no screen image • Make sure the video cable supplied with the  LCD display is tightly secured to the video
output port on the back of the computer. If the  other end of the video cable is not attached...

ViewSonicVX2433wm 18
Customer Support
For technical support or product  service, see the table below or contact your reseller.
NOTE:  You will need the product serial number.
Country/RegionWebsite T = Telephone
F = FAXEmail
Australia/New Zealand www.viewsonic.com.au AUS= 1800 880 818
NZ= 0800 008 [email protected]
Canada www.viewsonic.com T (Toll-Free)= 1-866-463-4775  
T (Toll)= 1-424-233-2533
F= [email protected]
Europe/Middle East/
Baltic countries/North 
Africa...