ViewSonic VX2433wm Manual

							
ViewSonicVX2433wm 9
Adjusting the Screen Image
Use the buttons on the front control panel to di splay and adjust the OSD controls which display 
on the screen. The OSD controls are explained at  the top of the next page and are defined in 
“Main Menu Controls” on page 11.
Main Menu
with OSD controls
Scrolls through menu options and adjusts the displayed control. Audio Adjust (T) / Contrast  ( S)
Displays the control screen for the highlighted control. Also toggles between two controls on some screens. Input select.
Power light
Blue = ON
Orange = Power Saving Standby Power On/Off
Displays the Main Menu or exits the control screen and saves adjustments.
 
						

							
ViewSonicVX2433wm 10
Do the following to ad
just the display setting:
1. To display the Main Menu, press button [1].
NOTE:  All OSD menus and adjustment screens  disappear automatically after about 15 
seconds. This is adjustable through the  OSD timeout setting in the setup menu.
2. To select a control to adjust, press SorT to scroll up or down in the Main Menu.
3. After the desired control is se lected, press button [2]. A cont rol screen like the one shown 
below appears.
4. To adjust the control, press the up  S or down  T buttons.
5. To save the adjustments and  exit the menu, press button [1]  twice.
The following tips may help  you optimize your display:
• Adjust the computers graphi cs card so that it outputs a 1920 x 1080 @ 60Hz video signal to
the LCD display. (Look for instructions on “cha nging the refresh rate” in the graphics cards
user guide.)
• If necessary, make small adjustments using  H. POSITION and V. POSITION until the
screen image is completely visible
. (The black border around the edge of the screen should
barely touch the illuminated “act ive area” of the LCD display.)
The line at the bottom of the screen shows
the current functions of buttons 1 and 2:
Exit or select the Brightness control.
 
						

							
ViewSonicVX2433wm 11
Main Menu Controls
Adjust the menu items shown below by using the up  S and down  T buttons.
Control Explanation
Auto Image Adjust  automatically sizes, centers, a nd fine tunes the video signal 
to eliminate waviness and distortion. Pr ess the [2] button to obtain a sharper 
image.
NOTE:  Auto Image Adjust works with most common video cards. If this 
function does not work on your LCD display,  then lower the video refresh rate 
to 60 Hz and set the resolution to its pre-set value.
Contrast  adjusts the difference between the image background  (black level) 
and the foreground (white level).
Brightness  adjusts background black level of the screen image.
Input Select  toggles between inputs if you ha ve more than one computer 
connected to the LCD Display.
Audio Adjust
Vo l u m e  increases the volume, decreases  the volume, and mutes the audio.
Mute  temporarily silences audio output.
Color Adjust  provides several color adjustment  modes, including preset color 
temperatures and a User Color mode wh ich allows independent adjustment of 
red (R), green (G), and blue (B). The  factory setting for this product is 6500K 
(6500 Kelvin).
 
						

							
ViewSonicVX2433wm 12
Control Explanation
sRGB-This is quickly becoming the industry standard for color management, 
with support being included in many of th e latest applications. Enabling this 
setting allows the LCD display to more accurately display colors the way they 
were originally intended. Enabling the sRGB  setting will cause the Contrast and 
Brightness adjustments to be disabled.
9300K- Adds blue to the screen image for  cooler white (used in most office 
settings with fluorescent lighting).
7500K- Adds blue to the screen image for  cooler white (used in most office 
settings with fluorescent lighting).
6500K- Adds red to the screen image for warmer white and richer red.
5000K- Adds red to the screen image for warmer white and richer red.
User Color  Individual adjustments for red (R), green (G),  and blue (B).
1. To select color (R, G or B) press button [2].
2. To adjust selected color, press Sand T.
Important:  If you select RECALL from the Main Menu when the product is 
set to a Preset Timing Mode, colors  return to the 6500K factory preset.
Information  displays the timing mode (vid eo signal input) coming from the 
graphics card in the computer, the LC D model number, the serial number, and 
the ViewSonic
® website URL. See your graphics card’s user guide for 
instructions on changing the resolution an d refresh rate (vertical frequency).
NOTE:  VESA 1920 x 1080 @ 60Hz (recommended) means that the resolution 
is 1920 x 1080 and the refresh rate is 60 Hertz.
 
						

							
ViewSonicVX2433wm 13
Control Explanation
Manual Image Adjust  displays the Manual Image Adjust menu.
H./V. Position (Horizontal/Vertical Position)  moves the screen image left or 
right and up or down.
H. Size (Horizontal Size)  adjusts the width of the screen image.
Fine Tune  sharpens the focus by aligning te xt and/or graphics with pixel 
boundaries.
NOTE:  Try Auto Image Adjust first.
Sharpness  adjusts the clarity and focus of the screen image.
Dynamic Contrast  allows the user to turn the  contrast ratio enhancement on or 
off.
Response Time  adjusts the response time of liquid-crystal display for image 
quality enhancement.
Standard  sets response time to normal speed.
Advanced  sets response time to higher speed.
Ultra Fast  sets response time to highest speed.
Aspect ratio  Selects the image size for 4:3 and full screen.
 
						

							
ViewSonicVX2433wm 14
Control Explanation
Display Mode provides two color space modes. The factory setting for this 
product is RGB mode.
RGB Mode  sets color space to RGB for PC timing mode.
YUV Mode  sets color space to YUV for HD timing mode.
ECO Mode  provides the lower power consum ption by reducing the brightness. 
Standard:  The default br ightness setting.
Optimize:  Decreases the brightness by 25 %.
Conserve:  Decreases the brightness by 50 %.
Setup Menu  displays the menu shown below:
Language  Select  allows the user to choose th e language used in the menus and 
control screens.
Resolution Notice  advises the optimal resolution to use.
OSD Position  allows the user to move the OSD menus and control screens.
OSD Timeout  sets the length of time the OSD  screen is displayed. For example, 
with a “15 second” setting,  if a control is not pushed within 15 seconds, the 
display screen disappears.
OSD Background  allows the user to turn the OSD background On or Off.
 
						

							
ViewSonicVX2433wm 15
Control Explanation
Sleep Set up the auto power off time for  30/45/60/120 minutes. (Its inactive in 
PC mode only)
Memory Recall  returns the adjustments back to fa ctory settings if the display is 
operating in a factory Preset Timing Mode  listed in the Specifications of this 
manual.
Exception:  This control does not affect cha nges made with the Language Select 
or Power Lock setting.
 
						

							
ViewSonicVX2433wm 16
Other Information
Specifications
1 Macintosh computers older than G3 require a ViewSonic® Macintosh adapter. To order an adapter, contact
ViewSonic. LCD
Ty p e
Color Filter
Glass Surface 24” (full 23.6 wide viewable diagonal area),
TFT (Thin Film Transistor), Active Matrix WUXGA LCD,
0.2715 mm pixel pitch
RGB vertical stripe
Anti-Glare
Input Signal Video Sync RGB analog (0.7/1.0 Vp-p, 75 ohms)
HDMI/DVI-D (TMDS digital, 100ohms)
Composite Sync, Separate Sync, Sync on Green
f
h:24-82 kHz, fv:50-75 Hz
Compatibility PC
Macintosh
1Up to 1920 x 1080 Non-interlaced
Power Macintosh up to 1920 x 1080
Resolution Recommended
and supported 1920 x 1080 @ 60 Hz
1680 x 1050 @ 60 Hz
1600 x 1200 @ 60 Hz
1440 x 900 @ 60, 75 Hz
1280 x 1024 @ 60, 75 Hz
1024 x 768 @ 60, 70, 72, 75 Hz
800 x 600 @ 56, 60, 72, 75 Hz
640 x 480 @ 60, 75 Hz
720 x 400 @ 70 Hz
Video Timing 
(HDMI) Recommended
and supported 480i / 480p / 576i / 576p / 720p / 1080i / 1080p
Power Voltage 100-240 VAC, 50/60 Hz (auto switch)
Display area Full Scan 521.28 mm (H) x 293.22 mm (V)
20.52 (H) x 11.54 (V)
Operating
conditions Temperature
Humidity
Altitude +32° F to +95° F (0° C to +35° C)
10% to 90%  (non-condensing)
To 10,000 feet
Storage
conditions Temperature
Humidity
Altitude -4° F to +140° F (-20° C to +60° C)
10% to 80% (non-condensing)
To 40,000 feet
Dimensions Physical 572 mm (W) x 418 mm (H) x 231 mm (D)
20.52 (W) x 16.46 (H) x 9.09 (D)
Weight Physical 11.11 lb (5.04 kg)
Regulations BSMI, CCC, PSB, C-Tick, MIC (KCC), CE, Ergo,
Gost-R/Hygienic, Ukraine, SASO, UL/cUL, NOM,
FCC-B, ICES-B, TUV-S/IRAM/UL-AR S Mark, E
NERGY STA R®
Power saving
modes On
Off 46W (Typical)    (blue LED)

						

							
ViewSonicVX2433wm 17
Troubleshooting
No power
• Make sure power button (or switch) is ON.
• Make sure A/C power cord is secu rely connected to the LCD display.
• Plug another electrical device (l ike a radio) into the power outlet to verify that the outlet is
supplying proper voltage.
Power is ON but no screen image • Make sure the video cable supplied with the  LCD display is tightly secured to the video
output port on the back of the computer. If the  other end of the video cable is not attached
permanently to the LCD display, tightly secure it to the LCD display.
• Adjust brightness and contrast.
• If you are using an Macintosh older th an G3, you need a Macintosh adapter.
Wrong or abnormal colors • If any colors (red, green, or blue) are missi ng, check the video cable to make sure it is
securely connected. Loose or  broken pins in the cable connector could cause an improper
connection.
• Connect the LCD display to another computer.
• If you have an older graphi cs card, contact ViewSonic
® for a non-DDC adapter.
Control buttons do not work • Press only one button at a time.
 
						

							
ViewSonicVX2433wm 18
Customer Support
For technical support or product  service, see the table below or contact your reseller.
NOTE:  You will need the product serial number.
Country/RegionWebsite T = Telephone
F = FAXEmail
Australia/New Zealand www.viewsonic.com.au AUS= 1800 880 818
NZ= 0800 008 [email protected]
Canada www.viewsonic.com T (Toll-Free)= 1-866-463-4775  
T (Toll)= 1-424-233-2533
F= [email protected]
Europe/Middle East/
Baltic countries/North 
Africa www.viewsoniceurope.com Contact your reseller
Hong Kong www.hk.viewsonic.com T= 852 3102 2900 [email protected]
India www.in.viewsonic.com T= 1800 11  9999 [email protected] 
Korea www.kr.viewsonic.com T= 080 333 2131 [email protected]
Latin America 
(Argentina) www.viewsonic.com/la/ T= 0800 666 0194 [email protected]
Latin America (Brazil) www.viewsonic.com /la/ T= 0800 891 6984 [email protected]
Latin America (Chile) www.viewsonic.com/l a/ T= 800 440 303 [email protected]
Latin America 
(Columbia) www.viewsonic.com/la/ T= 01 800 915 6588 [email protected]
Latin America (Mexico) www.viewsonic.com/la/ T= 001 800 514 6518 [email protected]
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72 160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS
Electroser, Av Reforma No. 403Gx39 y 41, 9700 0 Mérida, Yucatán. Tel: 01.999.925.19.16
Other places please refer to http://www .viewsonic.com/la/soporte/index.htm#Mexico
Latin America (Peru) www.viewsonic.com /la/ T= 0800 53458 [email protected]
Macau www.hk.viewsonic.com T= 853  700 303 [email protected]
Puerto Rico & Virgin 
Islands www.viewsonic.com T= 1-800-688-6688 (English)
T= 1-866-379-1304 (Spanish)
F= 1-909-468-1202 [email protected]
[email protected]
Singapore/Malaysia/
Thailand www.ap.viewsonic.com T= 65 6461
 6044 [email protected]
South Africa www.viewsoniceurope.com www.vie wsoniceurope.com/uk/Support/Calldesk.htm
United Kingdom www.viewsoniceurope.com
/uk/ www.viewsoniceurope.com/uk/Support/Calldesk.htm
United States www.viewsonic.com T (Toll-Free)= 1-800-688-6688   
T (Toll)= 1-424-233-2530
F= [email protected]