ViewSonic VX1945wm Manual

ViewSonicVX1945wm 19
USB Hub Installation
Refer to the following information
Connect any USB devices via the USB ports on the ViewDock.
Windows will auto detect and install the generic Windows USB driver for USB 1.1/2.0 device
operation.
You do not need to install any special drivers for the USB Hub if your OS is Windows 2000/
ME/XP.
USB hub installation guide for Windows 98SE :
Insert the included CD into the CD-ROM drive.  The Autorun feature will automatically begin
the installation process. Follow...

ViewSonicVX1945wm 20
ViewDockTM Connecting with iPod 
Refer to the following information 
1.Make sure the ViewDock power is ON.
2.Dock your iPod into the universal iPod docking station with the appropriate adapter insert. 
3.The iPod LED indicator will turn on amber
4.Wait for a few seconds for the iTunes software to launch.
5.Play your favorite song with iTunes software (for all iPod models) or play music from iPod 
directly (excluding iPod shuffle.)
iPod adapter insert description:
iPod with video...

ViewSonicVX1945wm 21
Other Information
Specifications
1 Macintosh computers older than G3 require a ViewSonic® Macintosh adapter. To order an adapter, contact 
ViewSonic.LCDTy p e
Color Filter
Glass Surface19” (full 19 viewable diagonal area),
TFT (Thin Film Transistor), Active Matrix WXGA LCD,
0.285 mm pixel pitch
RGB vertical stripe
Anti-Glare
Input SignalVideo
SyncRGB analog (0.7/1.0 Vp-p, 75 ohms) / TMDS Digital (100ohms)
Separate Sync,
f
h:30-82 kHz, fv:50-85 Hz
CompatibilityPC
Macintosh
1
Up to...

ViewSonicVX1945wm 22
Troubleshooting
No power
• Make sure power button (or switch) is ON.
• Make sure A/C power cord is securely connected to the LCD display.
• Plug another electrical device (like a radio) into the power outlet to verify that the outlet is 
supplying proper voltage.
Power is ON but no screen image
• Make sure the video cable supplied with the LCD display is tightly secured to the video 
output port on the back of the computer. If the other end of the video cable is not attached...

ViewSonicVX1945wm 23
Customer Support
For technical support or product service, see the table below or contact your reseller.
NOTE: You will need the product serial number.
Country/RegionWebsite T = Telephone
F = FAXEmail
United States www.viewsonic.com/supportT= 800 688 6688
F= 909 468 [email protected]
Canada www.viewsonic.com/supportT= 866-463-4775
F= [email protected]
Latin America 
(Mexico/Chile)www.viewsonic.com/support/T= 866-323-8056
F=...

ViewSonicVX1945wm 24
Cleaning the LCD Display
• MAKE SURE THE LCD DISPLAY IS TURNED OFF.
• NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE.
To clean the screen:
1.Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2.If the screen still not clean, apply a small amount of non-ammonia
, non-alcohol based glass 
cleaner onto a clean, soft, lint-free cloth, and wipe the screen.
To clean the case:
1.Use a soft, dry cloth.
2.If the case still not clean,...

ViewSonicVX1945wm 25
Limited Warranty
VIEWSONIC® LCD DISPLAY
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during
the warranty period. If a product proves to be defective in material or workmanship during the warranty period,
ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts
may include remanufactured or refurbished parts or components.
How long the warranty...