ViewSonic Vt1602l Manual

12
ButtonDescription
4 0~9, - 
number 
buttons Press the respective button to select a channel. 
After	you	input	the	channel	numbers,	press	
ENTER to direct to the channel immediately, or 
wait for 3 seconds to change automatically.
5 - VOL +
Press	to	adjust	the	volume.
6 FAV Press this button to show Favorite List and select 
your favorite channels that have already been 
stored.
j To preset favorite channels, set the Favorite 
option in the Channel menu (see page 16). 
7 ▲▼◄►/ 
ENTER 
buttons Press...

13
ButtonDescription
13 RETURN Press to return to the previous channel.
14 C.C Press to select the Closed Caption menu in the 
TV	or	
AV	mode.	
15 ▼ CH ▲ Decrease or Increase the channel number
16 GUIDE Press to display the Electronic Program Guide 
(EPG). It contains the program information for 
the channel you’re watching.
17 EXIT Press to exit the OSD menu screen.
18 MENU
Press to turn the OSD (On-Screen Display) 
menu on.
19 ASPECT Press this button repeatedly to select the screen 
size.  
Available...

14
Operation
Turning the TV On and Off
Press 
 on the remote control.
You can also use the 
 key on the front side of the panel.
j If there is no input signal within 10 minutes, TV will be turned off 
automatically.
Initial Setup
If an antenna or cable (without a cable box) is connected to your 
TV’s	tuner,	you	will	need	to	go	through	an	INITIAL 	SETUP	process	
in order to watch the TV.  The setup wizard will automatically start 
when	you	first	turn	on	the	 TV.	
1.	Press	◄	or	►	button	to	select	the	 Menu...

15
Changing Channels
1.	Using	Channel	ButtonsPress	▼CH▲	to	change	channels,	and	the	 TV	changes	the	
available	channels	in	sequence.
2.	Using	Number	Buttons (1)	 ATV
The	“-”	has	no	function	in	 ATV	mode.	Directly	press	the	number	
buttons to select channels.
(2) DTV
Use	“-”	to	select	the	sub	channel	in	DTV.
For example: Your sub channel number is 80-3.
Press	8	→	press	0	→	press	“-”	→	press	3.
j Return to the previous channel, press  RETURN.
Adjusting the Volume
Press VOL +/-	to	adjust	volume.
To turn off...

16
Selecting the Input Source
To select the TV or other external input sources connected to the TV:
1. Press INPUT on the remote control.
2.	Press	▲	or	▼	to	select	the	desired	input	source.
3.	 To	confirm	the	selection,	press  ENTER.
Favorite Channel Setting
To set your favorite channel into memory:
1. Press MENU to display the OSD main menu.
2.	Press	◄	or	►	to	select	 CHANNEL menu, then press ENTER to 
enter the menu. 
3.	Press	▲	or	▼to	select	 Favorite,	then	press	►	to	enter.	
4.	Press	▲	or	▼	to	select...

17
Using the Parent Controls
With	PARENT	CONTROL,	you	can	block	television	and	movie	programming	based	on	Movie	and	
TV ratings. 
Password	is	required	to	access	the	PARENTAL 	CONTROL	menu.	The	default	is	“0000”.
To	manage	programs	using	the	US	Ratings	system:
1. Press MENU to display the OSD main menu.
2.	Press	◄	or	►	to	select	 Lock menu, then press ENTER to  
enter the menu. 
3. Enter the password. 
4.	Press	▲	or	▼to	select	 System Lock,	then	press	◄	or	►	to		
select On.
5.	Press	▲	or	▼	to	select	 US...

18
TV Rating
1.	Press	▲	or	▼	to	select	
TV Rating,	then	press	►	to	enter	its	
submenu.
2.	Press	▲	or	▼	to	select	your	desired	 TV	ratings	level	and	press	
◄	or	►	to	select	the	desired	content	check	box.
The	 TV	ratings	level	and	content	are	defined	as	following:
TV ratings level TV ratings content
•	 TV-Y (all children)
•	 TV-Y7 (older children)
•	 TV-G (general audience)
•	 TV-PG (guidance suggested)
•	 TV-14 (strongly cautioned)
•	 TV-MA 	(mature	audience) •	
D (suggestive dialog)
•	 L (adult...

19
Canada English 
1.	Press	▲	or	▼	to	select	
Canada English,	then	press	►	to	enter.
2.	Press	◄	or	►	to	select	your	desired	Canadian	English	rating	 level.
The	Canadian	English	rating	levels	are	defined	as	following:
•	C (children)
•	 C8+ (children eight years and older)
•	 G (general programming, suit able for all audiences)
•	 PG (parental guidance)
•	 14+ (viewers and older)
•	 18+ (adult programming)
3. Press ENTER	to	lock	/	unlock	your	selection.
4. Press EXIT to exit the menu.
Canada French 
1....

20
Changing Password
To change a new password:
1. Press MENU to display the OSD main menu.
2.	Press	◄	or	►	to	select	Lock	menu,	then	press	ENTER	to	enter	
the menu. 
3. Enter the password. 
4.	Press	▲	or	▼to	select	 Change Password,	then	press	►	to	enter	
its submenu.
5.	Enter	the	old	password	on	 Old PIN.
6. Enter your new password on  New PIN.
7. Enter your new password again on  Confirm.
The screen will return to the  Lock menu. This indicates the 
password has been changed.
8. Press EXIT to exit the...

21
Customizing PC Display
Connect the PC and your TV using the VGA cable. See “Personal
Computer” on page 10.
1. Press INPUT  to display the Source Select menu.
2. Press ▲ or ▼ to select PC, then press ENTER to confirm the 
setting.
3. Press MENU to display the OSD main menu.
4. Press ◄ or ► to select  Setup menu, then press ENTER to enter 
the menu. 
5. Press ▲ or ▼ to select  PC Settings, then press ENTER to enter 
its submenu.
6. Press ▲ or ▼ to select  H-Pos, V-Pos, Clock,Phase or Auto, 
and press ◄...