ViewSonic Vt1602l Manual

2
Installing the LCD TV
Installing the Stand
Figure 1Figure 2Figure 3
                 (VT2216-L )
                (VT1602-L )
1. Carefully place the TV screen side down on a cushioned surface to protect the screen from  damage. (see Figure 1)
2. Attach the foot stand and secure it with the included screws. Please fas\
ten with a cross screw  driver. (see Figure 2)
3. Stand the TV up. (see Figure 3)
Disconnecting the Stand
1. Carefully place the TV screen side down on a cushioned surface to protect the...

3
Mounting ViewSonic LCD TV to the wall
The LCD TV can be used in a free standing position or wall-mounted. Before installing the product to 
the wall, please consider the following guidelines:•	Read the Important Safety Instructions, at the start of this manual. 
•	 Do not install in a moist or wet environment. This equipment is intended for  indoor use.
•	 Do not	install	near	heat	source,	or	strong	magnetic	fields.
•	 Use only ViewSonic approved  wall-mounting brackets to support the LCD TV weight.
•...

4
Wall Mount Kit Specifications (VESA)
When attaching to other building materials, please contact your nearest \
dealer.
A
B DC
Product Family
inchVESA Spec. (A x B) Standard Screw  
(C x D) Quantity
LCD TV 22100 x 100 mm M4 x L124
LCD TV 1675 x 75 mm M4 x L124
•	 ViewSonic provides the standard dimensions for wall mount kits as shown i\
n the table above.
•	 To	find	the	perfect	mount,	please	browse	www.viewsonic.com	or	call	our	service	team:  
United States 1-800-688-6688, Canada 1-866-463-4775, Europe...

5
Front View of the Product
2
31
4
5
6
Item
IconDescription
1 LED Indicator
Blue indicates power on. Red indicates standby mode.
Remote Control 
Receiver Receive IR signals from the remote control.
2 Volume VOL -
Decrease the volume.
Move to the left or adjust the setting on the OSD menu.
VOL + Increase the volume.
Move to the right or adjust the setting on the OSD menu.
3 Channel Select CH -
Return to the previous channel.
CH  + Advance to the next channel.
4 Menu MENUTurn the on-screen display (OSD)...

6
Rear View of the Product
8765234
1
TVIN
HDMI  IN
EARPHONE
OUT
10
9
11
Pr
Pb
Y/
VIDEO IN
AUDIO IN
R L PC/VGA INPC/VGA
AUDIO INDIGITALAUDIO  OUT
USB
Item Description
1 Power (AC input) Connect to the AC input power source.
2 USB Connect	to	USB	devices,	such	as	USB	flash	drive.
3 Digital Audio out. jack Connects to the audio jack on the digital/standard 5.1 audio 
system
4 Audio input (left/ right) Connect to the corresponding audio connectors on your A/V 
device
5 Composite Video input Connect to the...

7
Connecting the LCD TV
Cable System or VHF/UHF Antenna System
Enjoy	the	high-definition	and	standard-definition	digital	programming	along	with	standard-definition	
analog programming.
☼	
•	This TV is capable of receiving unscrambled digital programming for both cabl\
e and external VHF/
UHF antenna. 
•	 We strongly recommend that you connect the antenna/cable input using a 75\
-ohm coaxial cable 
(not supplied) to ensure the best picture quality. 
Cable or VHF/UHF
75-ohm coaxial cable Rear side of the...

8
DVI Connection
TV
IN
HDMI  IN
EARPHONE
OUT
Pr
Pb PC/VGA INPC/VGA
AUDIO IN
COMPONENT
VIDEO OUT
Pr YVIDEO DVI-HDTV OUT
HDMI OUT OUTIN
AUDIOL
R
Pb
LINE OUT
Audio cable
DVI-to-HDMI cable
Rear side of the TV
DVI-to-HDMI cable
CATV / Satellite 
antenna cableDVI-to-HDMI adapterAudio cable
HD cable box / 
 
HD satellite box
☼	
•	 For DVI connection, connect the HDMI jack (with DVI-to-HDMI cable or ad\
apter), and connect the 
audio jack to the AUDIO IN jacks of PC Audio input.
HDMI Timing Reference Chart
No....

9
YPbPr or Component Connection
COMPONENT
VIDEO OUT
Pr YVIDEO DVI-HDTV OUT
HDMI OUT OUTIN
AUDIOL
R
Pb
LINE OUT
Pr
Pb
Y/
VIDEO IN
AUDIO IN
R L PC/VGA INPC/VGA
AUDIO INDIGITALAUDIO  OUT
Audio cableComponent 
 
cable
Rear side of the TV
Component cable
CATV / Satellite 
antenna cableAudio cable HD cable box / 
 
HD satellite box
☼	
•	 YPbPr provides better quality than the AV connection.
AV Connection
COMPONENT VIDEO OUT
Pr YVIDEO DVI-HDTV OUT
HDMI OUT OUTIN
AUDIOL
R
Pb
LINE OUT
Pr
Pb
Y/
VIDEO IN
AUDIO IN
R...

10
Programming your Cable or Satellite Box remote
Refer to the user manual from your service provider to determine the set\
ting.
If it requires:
•	3 digits, please try “566”, “565”, “556”, or “688”\
. It usually works with DISHNetwork.
•	 4 digits, please try “0054”. It usually works with Cox.
•	 5-digits, please try “11454”, “11054”, or “10690”. It usually works with DIRECTV.
Personal Computer
Use the LCD TV as the monitor of your computer.
Pr
Pb
Y/
VIDEO IN
AUDIO IN
R L PC/VGA INPC/VGA
AUDIO...

11
Remote Control and TV Controls
Inserting Remote Control Batteries
1. Remove the battery cover by pulling then lifting the knob on the cove\
r.
2. Insert the batteries, corresponding to the (+) and (-) markings o\
n the battery compartment.
3. Reattach the battery cover.
 CAUTION
•	 Only	use	the	specified	 AAA	batteries.
•	 Do not mix new and old batteries. This may result in creaking or leakage, which may pose a risk of 
fire	or	lead	to	personal	injury.
•	 Insert batteries according to (+) and (-)...