ViewSonic Projector Pro9500 User Manual

Installation
236
ViewSonic
  Pro9500
NOTES for all users
  • For details on PERFECT FIT
, refer to PERFECT FIT  
of EASY MENU or OPTION menu in the Operating Guide .
• When arranging the projectors side by side (Style  2), it is also necessary to 
adjust the image position of one projector in accordance with the other projector 
as explained above. 
• It is strongly recommended to use a flat screen.  If a curved or skewed screen 
is used, it is very difficult to align the two images even if you use the...

237
ViewSonic
  Pro9500
3.1 Displaying STACK menu
Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > OPTION 
    > SERVICE > COMMUNICATION > STACK
STACK menu will appear on screen.  ( Operat-
ing Guide  → OPTION menu) The setting for 
Intellectual Stack operation starts from this menu. Set the Intellectual Stack operation using the STACK menu.
NOTE  • If you are using Simple Stack without RS-232C connection, skip this 
chapter.
• If you do not need to change the settings made during...

STACK menu settings
238
ViewSonic
  Pro9500
NOTE 
 • After setting Main or Sub, the setting 
information can be checked on Web Control. 
(Network Guide  → Web Control )  Select 
Projector Status in the main menu of Web 
Control.  The Stack Mode item shows whether 
your projector is set to MAIN or SUB even if 
STACK MODE is set to OFF.
3.  Press the ◄ button to return to the previous menu, or press the ► button to 
complete the setting. 
3.2 Selecting Main, Sub or off
To enable  Intellectual Stack ,...

STACK menu settings
239
ViewSonic
  Pro9500
3. Press the ◄ button to return to the previous menu, or press the ► button to 
complete the setting. 
NOTE  • If DUAL is selected, a menu to select MAIN or SUB appears on 
screen when a button on the control panel of the projector or remote control is 
pressed.  Select the projector that you want to operate.  Refer to the examples 
below.
-
 
When the MENU button is pressed, a menu to select MAIN or SUB is  displayed.  If MAIN is selected, EASY MENU or...

STACK menu settings
240
ViewSonic
  Pro9500
NOTE  • When DUAL is selected for LAMP MODE, the images projected 
from the Main and Sub projectors may be different. It is recommended to set 
the projectors as follows.
-
  Set the same image for TEMPLATE and START UP on the Main and Sub projectors.
-
  Capture the same image for MyScreen on the Main and Sub projectors.
-
  Save the same image on MY IMAGE on the Main and Sub projectors.
-
  Set the same message content for the Messenger function  (Network...

STACK menu settings
241
ViewSonic
  Pro9500
3. Press the ◄ button to return to the previous menu, or press the ► button to 
complete the setting. 
NOTE  • The ALTERNATE MODE dialog can be operated on the Main 
projector when ALTERNATE is selected in the LAMP MODE dialog.
• To maintain the quality and reliability of the two projectors, the projector with 
the most lamp usage may be turned on even if AUTO is selected.
3.4 Selecting lamp switching mode
The following setting is necessary only when ALTERNATE...

STACK menu settings
242
ViewSonic
  Pro9500
3. Press the ◄ button to return to the previous menu, or press the ► button to 
complete the setting.   
NOTE  • If FIXED (COMPUTER IN 1) is selected, either the  COMPUTER IN1 
or IN2 port can be selected as an input source on the Main projector.  When the 
COMPUTER or VIDEO button on the remote control or the INPUT button on 
the projector is pressed, the MAIN INPUT SOURCE dialog will be displayed on 
screen.  Select COMPUTER IN 1 or COMPUTER IN 2 with the...

STACK menu settings
243
ViewSonic
  Pro9500
Before exiting menu operation for Intellectual Stack, it is recommended to check 
all the settings in the STACK menu.  For dialogs that are called from the STACK 
menu, you can press the ◄ button to return to the STACK menu.   
Refer to the following to exit menu operation for Intellectual Stack.
3.6 Exiting Intellectual Stack menu
Dialog from STACK menu
When you press the ► button (functioning as EXIT 
key) after performing some changes to the set -
tings, a...

STACK menu settings
244
ViewSonic
  Pro9500(continued on next page)
3.7 Important information for Intellectual Stack  
This section provides important information for setting up the Main and Sub 
projectors, not explanations on operating the menus.  Read all information carefully.
●  To use Intellectual Stack, one projector must be set to Main and the other set to 
Sub.
●
  When stacking the two projectors, the control panel of the projector placed 
underneath cannot be operated. It is therefore...

STACK menu settings
245
ViewSonic
  Pro9500
●  The following functions are disabled.
-
  Executing of AUTO KEYSTONE (Operating Guide  → SETUP menu)
-
  STANDBY MODE (Operating Guide  → SETUP menu)
-
  AUTO SEARCH (Operating Guide  → OPTION menu)
-
  Turning on/off AUTO KEYSTONE (Operating Guide  → OPTION menu)
-
  DIRECT POWER ON ( Operating Guide → OPTION menu)
-
  MY SOURCE (Operating Guide  → OPTION menu)
-
  COMMUNICATION TYPE (Operating Guide  → OPTION menu → SERVICE 
→ COMMUNICATION)
●
  The input...