ViewSonic Projector Pro9500 User Manual

RS-232C Communication / Network command table (continued)
(continued on next page)
NamesOperation Type Header Command DataCRC
Action TypeSetting code
216
ViewSonic
  Pro9500
RS-232C Communication / Network command table (continued)
MESSAGESetOFF
BE  EF0306  00 8F  D6 01  0017  30 00  00
ON BE  EF0306  00 1F  D7 01  0017  30 01  00
Get BE  EF0306  00 BC  D6 02  0017  30 00  00
TEMPLATESetTEST PATTERN
BE  EF0306  00 43  D9 01  0022  30 00  00
DOT-LINE1 BE  EF0306  00 D3  D8 01  0022  30 01  00
DOT-LINE2...

RS-232C Communication / Network command table (continued)
(continued on next page)
NamesOperation Type Header Command DataCRC
Action TypeSetting code
217
ViewSonic
  Pro9500
RS-232C Communication / Network command table (continued)
MY BUTTON-1SetCOMPUTER IN1
BE  EF0306  00 3A  33 01  0000  36 00  00
COMPUTER IN2 BE  EF0306  00 FA  31 01  0000  36 04  00
LAN BE  EF0306  00 0A  34 01  0000  36 0B  00
USB TYPE A BE  EF0306  00 9A  30 01  0000  36 06  00
USB TYPE B BE  EF0306  00 3A  36 01  0000  36 0C  00...

RS-232C Communication / Network command table (continued)
(continued on next page)
NamesOperation Type Header Command DataCRC
Action TypeSetting code
218
ViewSonic
  Pro9500
MY SOURCESetCOMPUTER IN1
BE  EF0306  00 FA  38 01  0020  36 00  00
COMPUTER IN2 BE  EF0306  00 3A  3A 01  0020  36 04  00
LAN BE  EF0306  00 CA  3F 01  0020  36 0B  00
USB TYPE A BE  EF0306  00 5A  3B 01  0020  36 06  00
USB TYPE B BE  EF0306  00 FA  3D 01  0020  36 0C  00
HDMI BE  EF0306  00 0A  38 01  0020  36 03  00
COMPONENT BE...

219
ViewSonic
  Pro9500
PJLink command
PJLink command
POWRPower Contorol 0 = Standby
1 = Power On
POWR ? Power Status inquiry 0 = Standby
1 = Power On
2 = Cool Down
INPT Input Source selection 11 = COMPUTER IN 1
12 = COMPUTER IN 2
21 = COMPONENT
22 = S-VIDEO
23 = VIDEO
31 = HDMI
41 = USB TYPE A
51 = LAN
52 = USB TYPE B
INPT ? Input Source inquiry 11 = COMPUTER IN 1
12 = COMPUTER IN 2
21 = COMPONENT
22 = S-VIDEO
23 = VIDEO
31 = HDMI
41 = USB TYPE A
51 = LAN
52 = USB TYPE B
AVMT AV Mute10 = BLANK off
11 =...

220
ViewSonic
  Pro9500
PJLink command (continued)
CommandsControl Description Parameter or Response
ERST ?Error Status inquiry 1st byte: Refers to Fan error; one of 0 to 2
2nd byte: Refers to Lamp error; one of 0 to 2
3rd byte: Refers to Temptrature error; one of 0 to 
2
4th byte: Refers to Cover error; one of 0 to 2
5th byte: Refers to Filter error; one of 0 to 2
6th byte: Refers to Other error; one of 0 to 2
The mearning of 0 to 2 is as given below
0 = Error is not detected;  1 = Warning;  2 =...

221
ViewSonic
  Pro9500
Projector
Pro9500
Instant Stack Guide
Thank you for purchasing this product.  
This manual is intended to explain only Instant Stack feature.  
Other than what is mentioned in this manual, please see 
other manuals of this product.
WARNING  ►Before using this product, be sure to read all manuals for this 
product.  After reading them, store them in a safe place for future reference.  
►Follow all the instructions in the manuals or on the product.   The manufacturer 
assumes no...

222
ViewSonic
  Pro9500
1. Introduction   ....................223
1.1 Entries and graphical   
symbols explanation   ....................223
1.2 Important safety instruction
  ......223
Instant Stack feature   ........................223
General installation   ..........................225
1.3 Basic information   
and preparations   .........................226
Instant Stack  .................................... 226
Intellectual Stack and Simple Stack   .226
Remote control for Intellectual Stack   
and...

223
ViewSonic
  Pro9500
1.1 Entries and graphical symbols explanation
The following entries and graphical symbols are used for the manuals and the 
product as follows, for safety purpose.  Please know their meanings beforehand, 
and heed them.
1.2 Important safety instruction
The followings are important instructions for safely using the product in Instant 
Stack.  First of all, read the following instructions and be sure to always follow 
them when using Instant Stack of this product.
(continued on...

Introduction
224
ViewSonic
  Pro9500
1.2 Important safety instruction - For Instant Stack feature (continued)
NOTICE  ► Instant Stack is a feature that allows you to stack two projectors 
or arrange them side by side easily.  Depending on the installation and 
surrounding environment, images projected from the two projectors may not 
superimpose well enough.  The images cannot superimpose well enough 
especially when the screen is slanted, deformed or the surface is uneven.  
•
  Images projected...

Introduction
225
ViewSonic
  Pro9500
General installation
NOTICE  ► Position the projector to prevent light from directly hitting the 
projector’s remote sensor.  
• Do not place the product in a place where radio interference may be caused. 
CAUTION  ► Place the projector in a cool place with sufficient ventilation.  
•
 
Keep a space of 30 cm or more between a side of the projector and other 
objects such as a wall.   If you install two projectors in Style  2 , keep a space of 
30 cm or more between...