ViewSonic Projector PJD8653ws User Manual

10
LAN
1. Mini USB Connector
2.  HDMI Connector
3.  VGA Output Connector
4.  LAN Connector
5.  Audio In 1 Connector (For VGA In 1 Connector)
6.  S-Video Connector
7.  Left/Right RCA Audio Input Connector (For S-Video Connector)
8.  Audio Output Connector
9.  12V Trigger Relay Connector (12V, 250mA)
10.  RS232 Connector
11.  VGA In 1 Connector
12.  VGA In 2 Connector
13.  Audio In 2 Connector (For VGA In 2 Connector)
14.  Composite Video Input Connector
15.  Left/Right RCA Audio Input Connector (For...

11
1. Power 
2. VGA
3.  Auto Sync
4.  Enter
5.  Four Directional Select Keys
6.  My Button
7.  Menu
8.  Lock 
9.  Timer
10.  Magnify +/-
11.  Keystone 
/
12. Pattern
13.  D.Eco
14.  Freeze
15.  Blank
16.  Aspect
17.  Mute
18.  Volume +/-
19.  Information (i)
20.  Default
21.  Exit
22.  Color Mode
23.  Source
24.  Laser
Remote Control
1
2
3
4
5
7
6
9
12
13
1415
22
23
17
16
21
24
8
10
19
20
1118  

12
1. 
Power Cord
2.  Audio Cable *
3.  VGA to DVI-A Cable *
4.  VGA Cable
5.  RS232 Cable *
Connecting to Computer/Notebook
Installation
 
  Due to the difference in applications for each country, some regions may have different accessories.
 
  * Optional accessory
LAN
Notebook
Computer
Power socket
1
22
2
4
4
6. 
HDMI Cable *
7.  USB Cable *
8.  12V DC Jack *
9.  Network Cable *
Monitor
Audio Output +12V Output
345678
9   

13
Connecting to Video Sources
1. Power Cord
2.  Microphone Cable *
3.  Audio Cable Jack/RCA *
4.  S-Video Cable *
5.  Audio Cable *
 
  Due to the difference in applications for each country, some regions may have different accessories.
 
  * Optional accessory
6. VGA to HDTV (RCA) Cable *
7.  HDMI Cable *
8.  12V DC Jack *
9.  Composite Video Cable *
LAN
DVD player, Set-top box, 
HDTV receiver
S-Video output
Video output
1
6
2
+12V Output
Power socket Audio Output DVD player, Set-top box, 
HDTV...

14
Powering On the Projector
1. Securely connect the power cord and signal cable. When connected, the Po\
wer 
LED will turn red.
2.  Turn on the lamp by pressing  “ 
 ” button on the control panel or on the remote 
control. The Power LED will turn blue.
3.  Turn on your source that you want to display on the screen (computer, note-
book, video player, etc). The projector will detect the source automatically and 
will display on the screen.
4.  If you connected multiple sources at the same time, press...

15
Powering Off the Projector
1. Press the “  ” button on the control panel or on the remote control to turn off 
the projector. The following message will be displayed on the screen.   
Press the “ 
 ” button again to confirm.
Power Off?
Press power key again.
2.  The Power LED will turn red and blink rapidly after the projector is tur\
ned off. 
And the fans will continue to operate for about 10 seconds to ensure tha\
t the 
system cools properly.
3.  Once the system has finished cooling, the Power LED...

16
Adjusting the Projector’s Height
The projector is equipped with elevator feet for adjusting the image hei\
ght.
 
y To raise the image:
Use screw in feet to raise the image to the desired height angle and fine-tune 
the display angle.  
 
y To lower the image:
Use screw in feet to lower the image to the desired height angle and fine-tune 
the display angle.  
Adjusting the Projected Image
12
Elevator Feet
Elevator Feet
Elevator Feet Spacer  

17
Adjusting the Projector’s Focus
Focus Ring
To focus the image, rotate the focus ring until the image is clear.
Adjusting Projection Image Size
Refer to the graphics and table show as below to determine the screen si\
ze and 
projection distance. 
y Adjusting the vertical image position
Projection Distance (A)
Projection Distance (B)  Screen
WXGA Series
Screen Size (16:10) Projection Distance (A) Projection Distance (B)
Diagonal (inch) mmInch mm Inch mm
70 1778 20.4517 7.2 182
80 203223.5596 10.3 262...

18
XGA Series
Screen Size (4:3) Projection Distance (A) Projection Distance (B)
Diagonal (inch) mmInch mm Inch mm
60 1524 20.6522 7.4 187
70 177824.3617 11.1 282
77 195627.0684 13.7 349
80 203228.0712 14.9 378
90 228631.6802 18.4 468
 
  Projection Distance A(mm)=Screen size(mm) x 0.3496, Tolerance is around 3.1%,  
Ex: Projection Distance (684mm)=Screen size(1956mm) x 0.3496
 
  This table is for user’s reference only.  

19
User Controls
Using the Control Panel
NameDescription
Power 
 /   
Power LED Turn the projector on/off. 
Indicate the projector’s status.
Menu / Exit Launch the on-screen display (OSD) / Exit a menu.
Enter Confirm a selected item.
Source Select an input signal.
Four Directional 
Select Keys 1. 
Use ▲▼◄► to select items or make adjustments to your 
selection.
2.  ▲/▼act as short hot keys for Keystone +/- adjustment.
Lamp LED Indicate the projector’s lamp status.
Temp LED Indicate the projector’s...