ViewSonic Projector PJD8333s User Manual

 14
Connecting a computer or monitor
Connecting a computer
The projector provides two VGA input sockets that allow you to connect them to both 
IBM® compatibles and Macintosh® computers. A Mac adapter is needed if you are 
connecting legacy version Macintosh computers.
To connect the projector to a notebook or desktop computer:
• Using a VGA cable
1. Take the supplied VGA cable and connect one end to the D-Sub output socket of 
the computer.
2. Connect the other end of the VGA cable to the COMPUTER IN 1...

 15
4. Double click “ViewSonic USB Mirror-only” icon on the desktop, and the ViewSonic 
USB displays on the screen.
5. Select Mirror or Extension to display your contents.
Important
•
ViewSonic USB function can’t support Mac OS devices.
Connecting a monitor
If you want to view your presentation close-up on a monitor as well as on the screen, 
you can connect the MONITOR OUT signal output socket on the projector to an 
external monitor with a VGA cable following the instructions below:
To connect the...

 16
Connecting Video source devices
You can connect your projector to various Video source devices that provide any one 
of the following output sockets:
•HDMI
• Component Video
• S-Video
• Video (composite)
You need only connect the projector to a Video source device using just one of the 
above connecting methods, however each provides a different level of video quality. 
The method you choose will most likely depend upon the availability of matching 
terminals on both the projector and the Video...

 17
2. Connect the other end of the cable (with a D-Sub type connector) to the COM-
PUTER IN 1 or COMPUTER IN 2 socket on the projector.
Important
•
If the selected video image is not displayed after the projector is turned on and the 
correct video source has been selected, check that the Video source device is turned on 
and operating correctly. Also check that the signal cables have been connected 
correctly.
•VGA component adapter (ViewSonic P/N: CB-00008906)
Connecting an S-Video source device...

 18
Important
•
If the selected video image is not displayed after the projector is turned on and the 
correct video source has been selected, check that the Video source device is turned on 
and operating correctly. Also check that the signal cables have been connected 
correctly.
•You need only connect to this device using a composite Video connection if Component 
Video and S-Video inputs are unavailable for use. See Connecting Video source 
devices on page 16 for details.
Playing sound through the...

 19
• To make the microphone input available when the projector is in standby mode, turn 
on the Video/Audio > Audio Setting > Active Audio Out menu.
• If the microphone is not working, check the volume setting and cable connection.
• You might get feedback noise from the microphone when you are too close to the 
speaker of the projector. Move the microphone away from the speaker of the 
projector. The greater volume you require, the greater distance you need to be 
away from the Speaker to prevent the...

 20
Operation
Powering On/Off the Projector
Powering On the Projector:
1. Complete the AC power cord and peripheral signal cable(s) connections.
2. Press   to turn on the projector.
The projector takes a minute or so to warm up. 
3. Turn on your source (computer, notebook, DVD, etc.). The projector automatically
detects your source when Auto source setting is ON.
• If you are connecting multiple sources to the projector simultaneously, press
SOURCE on the projector to select your desired signal or press...

 21
Adjusting the Projector Height
The projector is equipped with an elevator foot to adjust the image height.
To raise or lower the image:
1. To raise or lower the image, press the elevator button and raise or lower the front
of the projector. Release the button to lock the adjustment.
2. To level the image on the screen, turn the tilt-adjustment feet to fine-tune the 
height.
Note
•
To avoid damaging the projector, make sure that the elevator foot and tiltadjustment feet 
are fully retracted before...

 22
Adjusting Projection Image Size
Refer to the graphic and table below to determine the screen size and projection 
distance.
PJD8333s
PJD8633ws
Screen
Distance from screen
[inch (m)]Height
[inch (cm)]Vertical Offset
[inch (cm)] Diagonal Size
[inch (cm)]Width
[inch (cm)]
60 (152) 48 (122) 22 (0.57) 36 (91) 5 (14)
70 (178) 56 (142) 26 (0.67) 42 (107) 6 (16)
90 (229) 72 (183) 34 (0.86) 54 (137) 8 (21)
100 (254) 80 (203) 37 (0.95) 60 (152) 9 (23)
120 (305) 96 (244) 45 (1.14) 72 (183) 11 (27)
150 (381) 120...

 23
PJD7333
PJD7533w
Note
•
Position the projector in a horizontal position; other positions can cause heat build-up 
and damage to the projector.
•Keep a space of 30 cm or more between the sides of the projector.
• Do not use the projector in a smoky environment. Smoke residue may buildup on 
critical parts and damage the projector or its performance
•Consult with your dealer for special installation such as suspending from a ceiling.
•There is 3%  tolerance among these numbers due to optical component...