ViewSonic Projector PJD7325 User Manual

 30
SYSTEM 
SETTING: 
BASICLanguage
Projector Posi-
tionFront Table / Rear Table / Rear 
Ceiling / Front Ceiling
Menu SettingsMenu Display 
Time5 sec / 10 sec / 15 sec / 20 sec 
/ 25 sec / 30 sec
Menu PositionCenter / Top-Left / Top-Right / 
Bottom-Left / Bottom-Right
Blank TimerDisable / 5 min / 10 min / 15 
min / 20 min / 25 min / 30 min
Splash Screen Black / Black / ViewSonic / Off
My ButtonAuto Sync / Projector Position / Menu Position / 
Color Temp. / Brightness / Contrast / 3D Settings / 
Screen...

 31
SYSTEM 
SETTING: 
ADVANCED High Altitude 
Mode
Off / On
DCR Off / On 
Audio Settings Audio Mode
Standard / Speech / 
Entertainment
Mute Off / On
Audio Volume 0 - 20
Audio In 2 Audio / Microphone
Microphone 
Vo lu m e 0 - 10
Power On/Off 
Ring Tone On / Off
Closed Caption Off / CC1 / CC2 / CC3 / CC4 
Lamp Settings Lamp Mode
Normal / Eco / Dynamic / 
SuperEco
Reset Lamp 
Hours Reset / Cancel
Lamp Hours
Filter Settings Filter Mode Off / On
Reset Filter 
Hours
Reset / Cancel
Filter Hours
Remote Control...

 32
DISPLAY
Screen Color
The Screen Color feature can help correct the projected picture’s colors to prevent 
possible color difference between the source and projected pictures.
There are several precalibrated colors to choose from: Whiteboard, Greenboard, and 
Blackboard.
Aspect Ratio
Select how the picture fits on the screen:
PJD6250L/PJD6252L/PJD7325:
•Auto:  
Scales an image proportionally to fit the projectors native resolution in its horizontal
or vertical width. You want to make most use of the...

 33
• Anamorphic:   
Scales a 2.35:1 aspect image so that it fills the screen.
• 2.35: 1
Scales an image so that it is displayed in the center of the screen with a 2.35:1
aspect ratio without aspect alteration.
• 16:10: 
Scales an image so that it is displayed in the center of the screen with a 16:10
aspect ratio,as it displays them without aspect alteration.
Keystone
Manually correct distorted images resulting from an angled projection.
Press Keystone /// on the projector or remote control to display...

 34
5. To reduce size of the picture, press Enter to switch back to the zoom in/out 
functionality, and press Auto Sync to restore the picture to its original size. You 
can also press 
 repeatedly until it is restored to the original size.
Using the OSD menu
1. Press Menu and then press   until the DISPLAY menu is highlighted.
2. Press 
 to select Zoom and press Enter. The Zoom bar displays.
3. Repeat steps 3-5 in the section of Using the remote control above. 

 35
PICTURE
Color Mode
There are many factory presets optimized for various types of images.
• Brightest: Maximizes the brightness of the projected image. This mode is suitable 
for environments where extra-high brightness is required.
• Dynamic: Is designed for presentations under daylight environment to match PC 
and notebook coloring. In addition, the projector will optimize the image quality 
using the dynamic PC function in accordance with the projected contents.
• Standard: Is designed for...

 36
• Enhanced : The range for HDMI output signal is from 0 - 255.
• Normal: The range for HDMI output signal is from 16 - 235.
Advanced
Tint
Adjusts the red and green color tones of the image.
Color
The higher the value, the more reddish the picture becomes. The lower the value, the 
more greenish the picture becomes.
Sharpness
Adjusts the image to make it look sharper or softer.
Gamma
Effect the represent of dark scenery. With greater gamma value, dark scenery will look 
brighter.
Brilliant Color
This...

 37
SOURCE
Quick Auto Search
Automatically scan through all the input source if the function in the OSD menu is On. 
The function will stop the signal auto scan process and fix the signal source you 
preferred if you turn Off the Quick Auto Search. 
3D Settings
This projector features a 3D function which enables you to enjoy the 3D movies, vid-
eos, and sporting events in a more realistic way by presenting the depth of the 
images. You need to wear a pair of 3D glasses to view the 3D images.
3D Sync
When...

 38
CEC
This projector supports CEC (Consumer Electronics Control) function for synchro-
nized power on/off operation via HDMI connection. That is, if a device that also sup-
ports CEC function is connected to the HDMI input of the projector, when the 
projector’s power is turned off, the power of the connected device will also be turned 
off automatically. When the power of the connected device is turned on, the projector’s 
power will be turned on automatically.
Note
• When connected to the HDMI input...

 39
LAN Control Settings
Allow you to configure the wired LAN settings. Refer to page 44.
• LAN Settings:
• When selecting “DHCP on”, “Projector IP Address”, “Subnet Mask”, Default 
Gateway and DNS Server will be gray out.
• When selecting Static IP, “Projector IP Address”, “Subnet Mask”, Default 
Gateway and DNS Server will be available.
• Projector IP Address: Numerical address to identify networked computers. 
• The IP Address is the number that identifies this projector on the network. You 
cannot...