ViewSonic Projector PJD6211 User Manual

							 EN-28
Appendix
LED Indicator Messages
LED Type  Color  Status Meaning
Power  LED Blue Solid (LED x 1)
The projector is  in standby 
mode. Lamp LED Off  Off 
Temp LED  Off  Off 
Power  LED Blue Solid (LED x 2)
Powering up Lamp LED Off  Off 
Temp LED  Off  Off 
Power  LED Blue Solid (LED x 2)
Normal operation Lamp LED Off  Off 
Temp LED  Off  Off 
Power  LED Blue Flash (LED x 2)
Power-down Lamp LED Off  Off 
Temp LED  Off  Off 
Power  LED Blue Solid (Full brightness)
The projector system has some 
problems with its fans, so the 
projector cannot start up.  Lamp LED Red Solid
Temp LED  Red Flash
Power  LED Blue Solid (Full brightness)
The lamp is in good condition 
and is projecting at maximum 
brightness.  Lamp LED Off  Off 
Temp LED  Off  Off 
Power  LED Blue Solid (Full brightness) The lamp has reached its end 
of life and must be changed 
soon. The lamp will continue to 
operate until it fails . Change 
the lamp. If the lamp is off, then  
the ballast will become 
malfunction.  Lamp LED Off  Solid
Temp LED  Off  Solid
Power  LED Blue Flash  (Full 
brightness)The projector is shutting and 
the fan motor is cooling the 
lamp for shutdown. Do not 
unplug the power cord or turn 
the power off before the Lamp 
LED changes to flashing. The 
fan motor will turn off when the 
lamp has cooled.  Lamp LED Red Solid
Temp LED  Red Solid
Power  LED Blue Solid (Full brightness) Temperature is too high. The 
lamp will turn off. The fan motor 
is cooling the lamp.  Lamp LED Red Flash
Temp LED  Red Off 
Power  LED Off  Off  The lamp ignition failed. If 
temperature is too high, the 
fans will cool the lamp. Lamp LED Red Solid
Temp LED  Red Solid 
						

							EN-29
Compatibility Modes
Computer: 
Compatibility Resolution H-Sync [KHz] V-Sync [Hz]
VGA 640 x 480 24.6 50.0
31.5 59.9
37.9 72.8
37.5 75.0
43.3 85.0
640 x 480 @ 120Hz 61.9 119.5
720 x 400 31.5 70.0
37.9 85.0
SVGA 800 x 600 31.0 50.0
35.2 56.0
37.9 60.3
48.1 72.0
46.9 75.0
53.7 85.1
76.3 120.0
800 x 600 @ 120Hz 76.3 120.0
XGA 1024 x 768 48.4 60.0
56.5 70.1
60.0 75.0
68.7 85.0
97.6 120.0
1024 x 768 @ 120Hz  97.6 120.0
1152 x 864 67.5 75.0
1280 x 960 60.0 60.0
85.9 85.0
SXGA 1280 x 1024 64.0 60.0
80.0 75.0
1280 x 960 64.7 60.0
75.0 75.0
1280 x 1024 64.0 60.0
80.0 75.0
14460 x 1050 64.7 60.0
1600 x 1200 75.0 60.0 
						

							 EN-30
Video:  
Signal Horizontal Frequency (kHz) Vertical Frequency (Hz)
1080i 33.8 60.0
1080i 28.1 50.0
1080p 67.5 60.0
1080p 56.3 50.0
720p 45.0 60.0
720p 37.5 50.0
576p 31.3 50.0
576i 15.8 50.0
480p 31.5 60.0
480i 15.8 60.0 
						

							EN-31
Troubleshooting
Refer to the symptoms and measures listed below before sending the projector
forrepairs. If the problem persists, contact your local reseller or service center. Please
refer to LED Indicator Messages as well.
Start-up problems
If no lights turn on:
„Be sure that the power cord is securely connected to the projector and the other endis plugged into an outlet with power.
„Press the power button again.
„Unplug the power cord and wait for a short while, then plug it in and press the powerbutton again.
Image problems
If the searching source is displayed:
„Press the SOURCE button on the control panel or the Source button on the remote
control one or more times to select another active input source.
„Be sure the external source is turned on and connected.
„For a computer connection, ensure your notebook computer’s external video port isturned on. Refer to the computer manual.
If the image is out of focus:
„Be sure the lens cover is removed.
„While displaying the on-screen menu, adjust the focus ring. (The image size shouldnot change; if it does, you are adjusting the zoom, not the focus.)
„Check the projection lens to see if it needs cleaning.
If the image is flickering or unstable for a computer connection:
„Press the Resync button on the remote control.
„Press the MENU button, go to Computer Image and adjust Frequency or
Tracking.
Remote control problemsIf the remote control does not operate:
„Be sure nothing is blocking the remote control receiver on the front of the
projector. Use the remote control within the effective range.
„Aim the remote control at the screen or at the front or back of the projector.
„Move the remote control so it is more directly in front of or behind the projector andnot as far to the side. 
						

							 EN-32
RS-232 Command and Configuration
Baud Rate:19200  Parity Bit:none  
Data Bit:8  Stop Bit:1  Assign Port:COM1
NameOperation 
typeCRCHeader Command Response
PowerON BE, EF, 10, 05, 00,  C6, FF, 11, 11, 01, 00, 01, 00 06
OFF BE, EF, 03, 06, 00,  DC, DB, 69, 00, 00, 00, 00, 00 06
SourceComputer 
(Analog RGB) BE, EF, 03, 19, 00, 19, 29, 01, 47, 02, CC, CC, 00 06
YCbCr BE, EF, 03, 19, 00, 89, E8, 01, 47, 02, CC, CC, 00 06
S-Video BE, EF, 03, 19, 00, E8, 69, 01, 47, 02, CC, CC, 00 06
Composite 
VideoBE, EF, 03, 19, 00, 78, A8, 01, 47, 02, CC, CC, 00 06
HDTV (Y-Pb-
Pr)BE, EF, 03, 19, 00, DA, 2B, 01, 47, 02, CC, CC, 00 06
OSDMenu BE, EF, 02, 06, 00, E9, D3, 30, 00, 00, 00, 00, 00 06
Up BE, EF, 02, 06, 00, 6D, D2, 34, 00, 00, 00, 00, 00 06
Down BE, EF, 02, 06, 00, 0B, D2, 32, 00, 00, 00, 00, 00 06
Left BE, EF, 02, 06, 00, DA, D3, 33, 00, 00, 00, 00, 00 06
Right BE, EF, 02, 06, 00, 38, D2, 31, 00, 00, 00, 00, 00 06
ECO On BE, EF, 03, 06, 00, EF, DB, 6A, 00, 00, 00, 00, 00 06
Off BE, EF, 03, 06, 00, 3E, DA, 6B, 00, 00, 00, 00, 00 06
Auto 
SourceOn BE, EF, 03, 06, 00, 89, DB, 6C, 00, 00, 00, 00, 00 06
Off BE, EF, 03, 06, 00, 58, DA, 6D, 00, 00, 00, 00, 00 06
Source BE, EF, 02, 06, 00, 57, D0, 2E, 00, 00, 00, 00, 00 06
Auto-Sync BE, EF, 02, 06, 00, 86, D1, 2F, 00, 00, 00, 00, 00 06
Blank Screen(Video) BE, EF, 02, 06, 00, DF, DF, 66, 00, 00, 00, 00, 00 06
KeystoneKeystone BE, EF, 02, 06, 00, 3D, DE, 64, 00, 00, 00, 00, 00 06
Up BE, EF, 03, 06, 00, 10, DB, 65, 00, 00, 00, 00, 00 06
Down BE, EF, 03, 06, 00, 23, DB, 66, 00, 00, 00, 00, 00 06
Image BE, EF, 03, 06, 00, F2, DA, 67, 00, 00, 00, 00, 00 06
Aspect Ratio BE, EF, 03, 06, 00, 0D, DA, 68, 00, 00, 00, 00, 00 06
Factory Reset BE, EF, 03, 06, 00, 6B, DA, 6E, 00, 00, 00, 00, 00 06
Lamp Hour BE, EF, 03, 06, 00, BA, DB, 6F, 00, 00, 00, 00, 00 Lamp Hour
Firmware Version BE, EF, 03, 06, 00, D5, D9, 70, 00, 00, 00, 00, 00 Version
System Status BE, EF, 03, 06, 00, 04, D8, 71, 00, 00, 00, 00, 00 03:Projector 
ON
(Normal 
Mode) 
						

							EN-33
                 
 D-Sub 9 pin
IR Control Code  
11 CD
2RXD
3TXD
4DTR
5GND
6DSR
7RTS
8CTS
9RI
Button name Product ID Code Data Code Description
Power 0x83 , 0xF4 87 Power On/Off
Freeze 0x83 , 0xF4 14 Pause the screen image
Menu 0x83 , 0xF4 32 Enter Management Menu
S0x83 , 0xF4 22 Upward(For OSD)
W0x83 , 0xF4 31 Leftward(For OSD)
X0x83 , 0xF4 33 Rightward(For OSD)
T0x83 , 0xF4 42 Downward(For OSD)
ViewMatch 0x83 , 0xF4 54 ViewMatch
Keystone+ 0x83 , 0xF4 34 Increase Keystone Value
Keystone- 0x83 , 0xF4 44 Decrease Keystone Value
Resync 0x83 , 0xF4 61 Resync The Input Signal Source
Source 0x83 , 0xF4 62 Find The Input Signal  Source
Blank 0x83 , 0xF4 64 Hide The Image With Blank
Aspect 0x83 , 0xF4 63 Aspect Ratio
           Wire List
C1 COLOR C2
1Black 1
2Brown 2
3Red 3
4 Orange 4
5 Yellow 5
6Green 6
7Blue 7
8 Purple 8
9White 9
SHELL DW SHELL 
						

							
 EN-34
IR Control Code
 
Key Format Byte1 Byte2 Byte3 Byte4
Power NEC 83 F4 13 87
Source NEC 83 F4 13 02
Up NEC 83 F4 13 82
Down NEC 83 F4 13 85
Left NEC 83 F4 13 83
Right NEC 83 F4 13 81
MENU NEC 83 F4 13 84
Auto NEC 83 F4 13 64
Mouse NEC 83 F4 13 6B
ViewMatch NEC 83 F4 13 63
Freeze NEC 83 F4 13 80
Enter / 
Mouse Left NEC 83 F4 13 8c
Exit / 
Mouse 
Right NEC 83 F4 13 8d
KeyS+ NEC 83 F4 13 86
KeyS- NEC 83 F4 13 8a
Digital 
Zoom+ NEC 83 F4 13 68
Digital 
Zoom- NEC 83 F4 13 6a
Volume+ NEC 83 F4 13 88
Volume- NEC 83 F4 13 89
Mute NEC 83 F4 13 8b
Blank NEC 83 F4 13 8f 
						

							
Customer Support
For technical support or product service, see the table below or contact\
 your reseller.
Note : You will need the product serial number.
Country/RegionWeb SiteT=Telephone
F=FaxE-mail
Australia/New Zealandwww.viewsonic.com.auAUS=1800 880 818NZ=0800 008 [email protected]
Canadawww.viewsonic.comT (Toll-Free)= 1-866-463-4775T (Toll)= 1-424-233-2533F= [email protected]
Europewww.viewsoniceurope.comwww.viewsoniceurope.com/uk/Support/Calldesk.htm
Hong Kongwww.hk.viewsonic.comT= 852 3102 [email protected]
Indiawww.in.viewsonic.comT= 1800 11 [email protected]
Ireland (Eire)www.viewsoniceurope.com/uk/www.viewsoniceurope.com/uk/sup-port/call-desk/[email protected]
Koreawww.kr.viewsonic.comT= 080 333 [email protected]
Latin America (Argentina)www.viewsonic.com/la/T= 0800 666 [email protected] 
Latin America (Chile)www.viewsonic.com/la/T= 800 440 [email protected]
Latin America (Columbia)www.viewsonic.com/la/T= 01 800 915 [email protected]
Latin America (Mexico)www.viewsonic.com/la/T= 001 800 514 [email protected]
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEASElectroser, Av Reforma No. 403Gx39 y 41, 97000 Merida, Yucatan. Tel: 01.999.925.19.16Other places please refer to http://www.viewsonic.com/la/soporte/index.htm#Mexico
Latin America (Peru)www.viewsonic.com/la/T= 0800 [email protected]
Macauwww.hk.viewsonic.comT= 853 2870 [email protected]
Middle Eastap.viewsonic.com/me/Contact your [email protected]
Puerto Rico & Virgin Islandswww.viewsonic.comT= 1-800-688-6688 (English)T= 1-866-379-1304 (Spanish)F= 1-909-468-1202
[email protected]@viewsonic.com
Singapore/Malaysia/Thailandwww.viewsonic.com.sgT= 65 6461 [email protected]
South Africaap.viewsonic.com/za/Contact your [email protected]
United Kingdomwww.viewsoniceurope.com/uk/www.viewsoniceurope.com/uk/sup-port/call-desk/[email protected]
United Stateswww.viewsonic.comT (Toll-Free)= 1-800-688-6688T (Toll)= 1-424-233-2530F= [email protected] 
						

							
Limited Warranty
VIEWSONIC® PROJECTOR
What the warranty covers: ViewSonic warrants its products to be free from defects in material and w\
orkmanship, under normal use, during the warranty period. If a product proves to be defective in \
material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a \
like product. Replacement product or parts may include remanufactured or refurbished p\
arts or components. 
Limited Three (3) year General Warranty Subject to the more limited one (1) year warranty set out below, North and South America: Three (3) years warranty for all parts excluding the lamp, three (3) years for labor, and one (1) year for the original lamp from the date of the first consumer purchase; Europe except Poland: Three (3) years warranty for all parts excluding the lamp, three (3) years for labor, and ninety (90) days for the original lamp from the date of the first consumer purchase; Poland: Two (2) years warranty for all parts excluding the lamp, two (2) years for labor, and ninety (90) days for the original lamp from the date of the first consumer purchase. 
Limited One (1) year Heavy Usage Warranty:Under heavy usage settings, where a projector’s use includes more than four (4) hours average daily usage, North and South America: One (1) year warranty for all parts excluding the lamp, one (1) year for labor, and ninety (90) days for the original lamp from the date of the first consumer purchase; Europe: One (1) year warranty for all parts excluding the lamp, one (1) year\
 for labor, and ninety (90) days for the original lamp from the date of the first consumer purchase. 
Other regions or countries: Please check with your local dealer or local  ViewSonic office for the warranty information.
Lamp warranty subject to terms and conditions, verification and approval.  Applies to manufacturer’s installed lamp only.  All accessory lamps purchased separately are warranted for 90 days.
Who the warranty protects:This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:1.  Any product on which the serial number has been defaced, modified or remov ed.
2.  Damage, deterioration, failure, or malfunction resulting from:
  a.     Accident, abuse, misuse, neglect, fire, water, lightning, or other acts of nature, improper maintenance, unauthorized product modification, or failure to follow instructions supplied with the product.
 
b.
 
Operation outside of product specifications.
  c.     Operation of the product for other than the normal intended use or not under normal conditions. d.   Repair or attempted repair by anyone not authorized by ViewSonic.
 
e.   Any damage of the product due to shipment.
 
f.   Removal or installation of the product.
 
g.   Causes external to the product, such as electric power fluctuations or failure. 
						

							
 h.   Use of supplies or parts not meeting ViewSonic’s specifications.
 
i.   Normal wear and tear.
 
j.   Any other cause which does not relate to a product defect.
3.
 
Removal, installation, and set-up service charges.
How to get service: 1.      For information about receiving service under warranty, contact ViewSonic Customer Support (please refer to “Customer Support” page). You will need to provide your product’s serial number.2.    To obtain warranted service, you will be required to provide (a) the or\
iginal dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the se\
rial number of the product.3.      Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic. 4.      For additional information or the name of the nearest ViewSonic service center, contact ViewSonic. 
Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the des\
cription contained herein including the implied warranty of merchantability and fitness for a particular purpose. 
Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the produ\
ct. ViewSonic shall not be liable for: 1.      Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity , loss of goodwill, interference with business relationships, or other commercial loss, even\
 if advised of the possibility of such damages. 2.    Any other damages, whether incidental, consequential or otherwise. 3.    Any claim against the customer by any other party. 
Effect of state law: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow limitations on implied warranties and\
/or do not allow the exclusion of incidental or consequential damages, so the above limitations and exclus\
ions may not apply to you. 
Sales outside the U.S.A. and Canada: For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your local ViewSonic dealer. The warranty period for this product in mainland China (Hong Kong, Maca\
o and Taiwan Excluded) is subject to the terms and conditions of the Maintenance Guarantee Card.For users in Europe and Russia, full details of warranty provided can be found in www.viewsoniceurope.com under Support/Warranty Information.
4.3: Projector Warranty                                                                P\
RJ_LW01 Rev. 1h 06-25-07