ViewSonic Projector PJ758/PJ759/PJ760 User Manual

ViewSonic
36PJ758/PJ759/PJ760
SCREEN Menu
SCREEN MenuSCREEN Menu
Item Description
LANGUAGE
Using the ▲/▼ buttons switches the OSD (On Screen Display) language.

TÜRKÇE

POLSKI

SUOMI
 ENGLISH  FRANÇAIS  DEUTSCH  ESPAÑOL  ITALIANO

NORSK

NEDERLANDS

PORTUGUÊS

РУССКИЙ  SVENSKA  ¿—µ  4P¨
[  1T
[  ãÄ.† 
MENU POSITIONUsing the ▲/▼/◄/► buttons adjusts the menu position.
To quit the operation, press MENU button on the remote control or 
keep no operation for about 10 seconds....

ViewSonic
37PJ758/PJ759/PJ760
SCREEN Menu
Item Description
START UPUsing the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an 
unsuitable signal is detected.
MyScreen 
Ù ORIGINAL 
Ù TURN OFF
    
Feature
MyScreenScreen can be registered by the MyScreen item 
(		38).
ORIGINAL Screen preset as the standard screen.
TURN OFF Plain black screen.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL 
screen will change to the BLANK...

ViewSonic
38PJ758/PJ759/PJ760
SCREEN Menu
Item Description
MyScreenThis item allows you to capture an image for use as a MyScreen 
image which can be used as the BLANK screen and START UP 
screen. Display the image you want to capture before executing the 
following procedure.
1.  Selecting this item displays a dialog 
titled “MyScreen”. It will ask you if 
you start capturing an image from 
the current screen.
Please wait for the target image to be displayed, and press the 
ENTER button when the image...

ViewSonic
39PJ758/PJ759/PJ760
SCREEN Menu
Item Description
MESSAGEUsing the ▲/▼ buttons turns on/off the message function.
TURN ON 
Ù TURN OFF
When the TURN ON is selected, the following message function works.
“AUTO IN PROGRESS” while automatically adjusting
“NO INPUT IS DETECTED”
“SYNC IS OUT OF RANGE”
“Searching…” while searching for the input
“Detecting…” while an input signal is detected
The indication of the input signal displayed by changing 
The indication of the aspect ratio displayed by...

ViewSonic
40PJ758/PJ759/PJ760
OPTION Menu
OPTION MenuOPTION Menu
Item Description
AUTO SEARCH
Using the ▲/▼ buttons turns on/off the automatic signal search function.
TURN ON 
Ù TURN OFF
When the TURN ON is selected, detecting no signal automatically 
cycles through input ports in the following order. The search is 
started from the current port. Then when an input is found, the 
projector will stop searching and display the image. 
 COMPUTER IN1 
Ö  COMPUTER IN2
   VIDEO
 
Õ S-VIDEO 
Õ COMPONENT 
AUTO...

ViewSonic
41PJ758/PJ759/PJ760
Item Description
AUTO OFFUsing the ▲/▼ buttons adjusts the time to count down to 
automatically turn the projector off.
Long (max. 99 minutes) 
Ù Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off automatically.When the time is set to 1 to 99, and when the passed time with no-
signal or an unsuitable signal reaches at the set time, the projector 
lamp will be turned off. 
If one of the projectors buttons or the remote control buttons...

ViewSonic
42PJ758/PJ759/PJ760
Item Description
MY BUTTONThis item is to assign one of the following functions to MY BUTTON 
1 and 2 on the remote control (
		6).
Choose 1 or 2 on the MY BUTTON menu using the ◄/► button 
fi rst. Then using the ▲/▼ buttons sets one of the following functions 
to the chosen button.
• COMPUTER1: Sets port to COMPUTER IN1.
• COMPUTER2: Sets port to COMPUTER IN2.
• COMPONENT: Sets port to COMPONENT(Y, Cb/Pb, Cr/Pr)
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO: Sets port to VIDEO.
•...

ViewSonic
43PJ758/PJ759/PJ760
Item Description
SERVICE
(continued)AUTO ADJUST
Using the ▲/▼ buttons enables/disables the 
automatic adjustment. When DISABLE is selected, 
the automatic adjustment feature is disabled, 
although rough adjustment is automatically performed 
depending on the basic setting.
FINE 
Ù FAST 
Ù DISABLE
      
FINE: Finer tuning including H.SIZE adjustment.
FAST:  Faster tuning, setting H.SIZE to prearranged data for the 
input signal.
• Depending on conditions, such as input...

ViewSonic
44PJ758/PJ759/PJ760
Item Description
SERVICE
(continued)KEY LOCK
Using the ▲/▼ buttons turns on/off the key lock feature. When 
TURN ON is selected, the buttons on the projector except the 
STANDBY/ON button are locked.
TURN ON 
Ù TURN OFF
• Please use to avoid a mischief and touching accidentally. This 
function does not have any effect on the remote control.
REMOTE FREQ.
Use the ▲/▼ button to change the projectors remote sensor 
setting.
1:NORMAL 
Ù 2:HIGH
Items with a checkmark are on. The...

ViewSonic
45PJ758/PJ759/PJ760
Item Description
SECURITYThis projector is equipped with security functions.
User registration is required before using the security functions.
Please contact your local dealer.
1. Using Security Features
1.1 Inputting the PASSWORD
1.1-1  Use the ▲/▼ buttons on the OPTION 
menu to select SECURITY and press the 
► button. The ENTER PASSWORD box 
will be displayed.
The factory default PASSWORD is 1273. 
This PASSWORD can be changed (1.2 Changing the PASSWORD). 
• It is...