ViewSonic Projector PJ758/PJ759/PJ760 User Manual

ViewSonic
6PJ758/PJ759/PJ760
Part names
Remote control
(1) VIDEO button (		17)
(2) COMPUTER button (
		16)
(3) SEARCH button (
		17)
(4) STANDBY/ON button (
		15)
(5) ASPECT button (
		17)
(6) AUTO button (
		19)
(7) BLANK button (
		21)
(8) MAGNIFY - ON button (
		20)
(9) MAGNIFY - OFF button (
		14, 20)
(10) HOME button (
		14)
(11) END button (
		14)
(12) PAGE UP button (
		14)
(13) PAGE DOWN button (
		14)
(14) VOLUME button (
		16)
(15) MUTE button (
		14, 16)
(16) FREEZE button (
		21)
(17) MY...

ViewSonic
7PJ758/PJ759/PJ760
Setting up
Setting upSetting up
Install the projector according to the environment and manner the projector will be 
used in.
  On a horizontal surface 
  Suspended from the ceiling  
 
• Keep a space of 30 cm or more 
between the sides of the projector 
and other objects such as walls.
• Consult with your dealer before 
a special installation such as 
suspending from a ceiling.
   
Screen size
(diagonal)4 : 3 screen 16 : 9 screen
  
Projection distance 
Screen 
heightScreen...

ViewSonic
8PJ758/PJ759/PJ760
Setting up
  On a horizontal surface 
  Suspended from the ceiling  
 
• Keep a space of 30 cm or more 
between the sides of the projector 
and other objects such as walls.
• Consult with your dealer before 
a special installation such as 
suspending from a ceiling.

The values shown in the table are calculated for a full size screen: 1024×768.
(a) Screen size (diagonal)
(b) Projection distance (±10%)
(c1), (c2) Screen height (±10%)
   
Screen size
(diagonal)4 : 3 screen 16 :...

ViewSonic
9PJ758/PJ759/PJ760
Setting up
WARNING  ►Place the projector in a stable horizontal position. If the 
projector falls or is knocked over it could cause injury and/or damage to the 
projector. Using a damaged projector could then result in fi re and/or electric 
shock.
•  Do not place the projector on an unstable, slanted or vibrational surface such 
as a wobbly or inclined stand.
•  Do not place the projector on its side, front or rear position. 
•  Consult with your dealer before a special...

ViewSonic
10PJ758/PJ759/PJ760
Setting up
Connecting your devices
Be sure to read the manuals for devices before connecting them to the projector. 
Make sure that all the devices are suitable to be connected with this product, and 
prepare the cables required to connect.
Please refer to the following illustrations to connect them.
WARNING  ►Do not disassemble or modify the projector and accessories.
►Be careful not to damage the cables, and do not use damaged cables.
CAUTION  ►Turn off all devices and...

ViewSonic
11PJ758/PJ759/PJ760
Setting up
NOTE  • Be sure to read the manuals for devices before connecting them to the 
projector, and make sure that all the devices are suitable to be connected with this 
product. Before connecting to a PC, check the signal level, the signal timing, and the 
resolution.
-  Some signal may need an adapter to input this projector.
-  Some PCs have multiple screen display modes that may include some signals which 
are not supported by this projector. 
-  Although the...

ViewSonic
12PJ758/PJ759/PJ760
Setting up
Connecting power supply
At fi rst, make sure that the power switch of the 
projector is set to OFF position (marked O).
1. Put the connector of the power cord into 
the AC inlet of the projector.
2. Firmly plug the power cord’s plug into the 
outlet.
WARNING  ►Please use extra caution when connecting the power cord, as 
incorrect or faulty connections may result in fi re and/or electrical shock.
• Only use the power cord that came with the projector. If it is...

ViewSonic
13PJ758/PJ759/PJ760
Remote control
Putting batteries
Please set the batteries to the remote control before using it. If the remote control starts 
to malfunction, try to replace the batteries. If you will not use the remote control for long 
period, remove the batteries from the remote control and store them in a safe place.
1. Holding the hook part of the battery 
cover, remove it.
2. Align and insert the two AA batteries 
according to their plus and minus terminals 
as indicated in the remote...

ViewSonic
14PJ758/PJ759/PJ760
Using as a simple PC mouse & keyboard
The enclosed remote control works as a simple mouse and 
keyboard of the PC, when the projectors USB port (B type) 
connects with the PCs USB port (A type) port via a mouse cable.
(1) HOME key: Press HOME button.
(2) END key: Press END button.
(3) PAGE UP key: Press PAGE UP button.
(4) PAGE DOWN key: Press PAGE DOWN button.
(5) Mouse left button: Press ENTER button.
(6) Move pointer: Use the cursor buttons ▲, ▼, ◄ and ►.
(7) ESC key:...

ViewSonic
15PJ758/PJ759/PJ760
Turning on the power
1. Make sure that the power cord is fi rmly and correctly 
connected to the projector and the outlet.
2. Remove the lens cover, and set the power switch to 
ON position (marked “ I “).
The POWER indicator will light up in steady orange 
(
		56). Then wait several seconds because the 
buttons may not function for these several seconds.
3. Press STANDBY/ON button on the projector or the 
remote control.
The projection lamp will light up and POWER indicator...