ViewSonic Projector PJ658D User Manual

16ViewSonic	 PJ658D

Powering On/Off  the Projector
Powering on the projector:
1.	 Remove	 the 	 projector 	 lens 	 cap.
2.	 Complete 	 the 	 AC 	 power 	 cord 	 and 	 per  pheral 	 s  gnal 	 cable(s) 	 connect  ons.
3.
	 	 Turn 	 on 	 the 	 ma  n 	 power 	 sw  tch.
4.	 Press
	
	button 	 to 	 turn 	 on 	 the 	 projector.
5.	 Turn
	
on
	
your 	 source 	 (computer, 	 notebook, 	 DVD, 	
etc.).
	
The 	 projector 	 automat  cally 	 detects 	 your 	
source.
	 “Source	 Found”...

ViewSonic	 PJ658D17

 Please wait until the fan motor and the Lamp LED turn off before removing 
the AC power cord from the projector.
Powering Off  the Projector:
1.	 Press 		button 	 to 	 turn 	 off 	 the 	 projector 	 lamp. 	 You 	 w  ll 	 see 	 a 	 message 	 “Press 	 Power 	
Button
	
to 	 Turn 	 Off 	 Projector. 	 Projector 	 must 	 cool 	 down 	 for 	 90 	 seconds 	 before 	
unplugg
 ng 	 or 	 restart  ng.” 	 appear 	 on 	 the 	 screen.
2.	 Press
	
 button again to confirm.
3.	 The...

18ViewSonic	 PJ658D

Adjusting the Projected Image
Adjusting the Projector Height
The	 projector 	 s 	 equ  pped 	 w  th 	 an 	 elevator 	 foot 	 to 	 adjust 	 the 	 mage 	 he  ght. 	 To 	 ra  se 	 or 	
lower 	 the 	 mage: 	
1.	 Turn 	 the 	 projector 	 over 	 and 	 locate 	 the 	 elevator 	 foot. 	 Press 	 the 	 elevator 	 button 	 to 	
extend 	 the 	 foot 	 so 	 t 	 may 	 be 	 adjusted. 	
2.	 Wh  le 	 hold  ng 	 down 	 the 	 elevator 	 button, 	 adjust...

ViewSonic	 PJ658D19

Adjusting the Projector Zoom and Focus
1.	 Focus	 the 	 mage 	 by 	 rotat  ng 	 the 	 focus 	 r  ng.
	 A 	 st  ll 	 mage 	 s 	 recommended 	 for 	 focus  ng.
2.	 Adjust
	 the 	 mage 	 by 	 rotat  ng 	 the 	 zoom 	 r  ng.
	 Rotate
	 to 	 the 	 r  ght 	 to 	 enlarge 	 the 	 mage.
	 Rotate
	 to 	 the 	 left 	 to 	 reduce 	 the 	 mage.
Adjusting Projection Image Size
Refer	 to 	 the 	 graph  c 	 and 	 table 	 below...

20ViewSonic	 PJ658D

 Position the projector in a horizontal position; other positions can cause heat 
build-up and damage to the projector. 
 Make sure the heat ventilation holes are not blocked. 
 Do not use the projector in a smoky environment. Smoke residue may cause 
buildup on critical parts (i.e. DMD, lens assembly, etc.) 
	Screen 	 S  ze	 		Project  on 	 D  stance 		 (m) 	
	
	
(

nch)	 W

de	 	 	 Tele	
	 30	-	 	 	 1.20	
	 40	1.33	 	 	 1.60	
	 50	1.66	 	 	 2.00	
	 60	2.00...

ViewSonic	 PJ658D21

Menu Operation
The	 projector 	 has 	 mult  l  ngual 	 On 	 Screen 	 D  splay 	 menus 	 that 	 allow 	 you 	 to 	 make 	
 mage 	 adjustments 	 and 	 change 	 a 	 var  ety 	 of 	 sett  ngs.
All	Images
Computer	Image
Color	Settng
Contrast
Keystone
Whte	Intensty
Degamma
Brghtness0	-	1000	-	100
-20-+20
Aspect	Rato1:1,	4:3,	16:9
0	-	10
0	-	6
0	-	100
0	-	100
0	-	100
0	-	100
Vdeo	Image
Frequency
Trackng
Hor....

22ViewSonic	 PJ658D

How to operate
1.	 Press	MENU	 button 	 to 	 open 	 the 	 OSD 	 menu.
2.	 When
	
OSD 	 s 	 d  splayed, 	 use 	
	 / 		 buttons 	 to 	 select 	 any 	 feature 	 n 	 the 	 ma  n 	 menu. 	
After
	
select

ng
	
the
	
des

red
	
ma

n
	
menu 	 feature, 	 press 	
	 button 	 to 	 enter 	 sub-menu 	
for
	
feature
	
sett

ng.
3.	 Adjust
	
the
	
sett

ngs
	
w

th
	
 	 / 		 buttons.
4.	 Press
	
MENU 	 button, 	 the 	 screen 	 w  ll...

ViewSonic	 PJ658D23

All Images (Computer / Video Mode) 
Brightness
Adjust	 the 	 br  ghtness 	 of 	 the 	 mage.
	 Press	 the 		 button 	 to 	 darken 	 the 	 mage.
	 Press	 the 		 button 	 to 	 l  ghten 	 the 	 mage.
Contrast
The
	 contrast 	 controls 	 the 	 degree 	 of 	 d  fference 	 between 	 the 	 l  ghtest 	 and 	 darkest 	 parts 	
of 	 the 	 p  cture. 	 Adjust  ng 	 the 	 contrast 	 changes 	 the 	 amount 	 of 	 black 	 and 	 wh  te 	  n...

24ViewSonic	 PJ658D

Computer Image (Computer Mode)
Frequency
“Frequency”changes	 the 	 d  splay 	 data 	 frequency 	 to 	 match 	 the 	 frequency 	 of 	 your 	
computer’s graphic card. If you experience a vertical flickering bar, use this function 
to	 make 	 an 	 adjustment.
Tracking
“Track ng” 	 synchron  zes 	 the 	 s  gnal 	 t  m  ng 	 of 	 the 	 d  splay 	 w  th 	 the 	 graph  c 	 card. 	 If 	 you 	
experience an unstable or flickering image, use this...

ViewSonic	 PJ658D25

Management (Computer / Video Mode)
Menu Location
Choose	 the 	 Menu 	 locat  on 	 on 	 the 	 d  splay 	 screen.
Projection Mode
		Rear-Desktop
When
	
you 	 select 	 th  s 	 funct  on, 	 the 	 projector 	 reverses 	 the 	  mage 	 so 	 you 	 can 	 project 	
beh

nd
	
a
	 translucent 	 screen.
		Rear-Ceiling
When
	
you 	 select 	 th  s 	 funct  on, 	 the 	 projector 	 reverses 	 and 	 turns 	 the 	 mage 	 ups  de 	 down 	
at
	
same...