ViewSonic Projector PJ588D User Manual
Here you can view all the pages of manual ViewSonic Projector PJ588D User Manual. The ViewSonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
34ViewSonic PJ588D/PJ568D/PJ508D Cleaning the Projector Clean ng the projector to remove dust and gr me w ll help ensure trouble-free operat on. Warning: Be sure to turn off and unplug the projector at least an hour before cleaning. Failure to do so could result in a severe burn. Use only a dampened cloth when cleaning. Do not let water to enter the ventilation openings on the projector. If a little water gets into the projector interior while cleaning, leave the projector...
Page 42
35ViewSonic PJ588D/PJ568D/PJ508D Cleaning the Case Refer to the follow ng to clean the projector case. 1.Wipe off dust with a clean dampened cloth. 2.Moisten the cloth with warm water and mild detergent (such as used to wash dishes), and wipe the case. 3.Rinse all detergent from the cloth and wipe the projector again. Caution: To prevent discoloration or fading of the case, do not use abrasive alcohol-based cleaners. Using the Kensington Lock If you are concerned about secur ty, attach the...
Page 43
36ViewSonic PJ588D/PJ568D/PJ508D TROUBLESHOOTING Common problems and solutions These gu del nes prov de t ps to deal w th problems you may encounter wh le us ng the projector. If the problem rema ns unsolved, contact your dealer for ass stance. Often after t me spent troubleshoot ng, the problem s traced to someth ng as s mple as a loose connect on. Check the follow ng before proceed ng to the...
Page 44
37ViewSonic PJ588D/PJ568D/PJ508D LED Error Messages ERROR CODE MESSAGEPOWER LED/FLASHESREADY LED/FLASHES System standby—Solid Cooling downFlashing— Environment usage task created error22 Thermal break status error30 Sensor over temperature31 Sensor status fail41 Lamp lit error51 Ballast SCI error52 Ballast UART error53 Fan1 error (Lamp)61 Fan2 error (Ballast)62 Fan3 error (Blower)63 Fan4 error (Power)64 Lamp door open70 DMD error80 Color wheel error90 Image Problems Problem: No image appears on the...
Page 45
![Page 45
38ViewSonic PJ588D/PJ568D/PJ508D
2.To ensure the problem s not caused by a connected PC’s v deo card, connect to another
computer.
Problem: The image is flat with no contrast Adjust the
Contrast sett ng on the Main menu of the OSD.
Problem: The color of the projected image does not match the source imag\
e.
Adjust the
Color Temperature and Gamma sett ngs on the Main menu of the OSD.
Lamp Problems
Problem: There...](http://img.usermanuals.tech/thumb/80/98840/w300_projector_manual_3605_d-44.png "Page 45
38ViewSonic PJ588D/PJ568D/PJ508D
2.To ensure the problem s not caused by a connected PC’s v deo card, connect to another
computer.
Problem: The image is flat with no contrast Adjust the
Contrast sett ng on the Main menu of the OSD.
Problem: The color of the projected image does not match the source imag\
e.
Adjust the
Color Temperature and Gamma sett ngs on the Main menu of the OSD.
Lamp Problems
Problem: There...")
38ViewSonic PJ588D/PJ568D/PJ508D 2.To ensure the problem s not caused by a connected PC’s v deo card, connect to another computer. Problem: The image is flat with no contrast Adjust the Contrast sett ng on the Main menu of the OSD. Problem: The color of the projected image does not match the source imag\ e. Adjust the Color Temperature and Gamma sett ngs on the Main menu of the OSD. Lamp Problems Problem: There...
Page 46
39ViewSonic PJ588D/PJ568D/PJ508D Audio Problems Problem: There is no sound 1.Adjust the projector volume. 2.Adjust the volume of the aud o source. 3.Check the aud o cable connect on. 4.Test the source aud o output w th other speakers. 5.Have the projector serv ced. Problem: The sound is distorted 1.Check the aud o cable connect on. 2.Test the source aud o output w th other speakers. 3.Have the projector serv ced. Having the Projector...
Page 47
40ViewSonic PJ588D/PJ568D/PJ508D SPECIFICATIONS Specifications MODELPJ508DPJ568DPJ588DD splay type “TI” DMD, 0.55” x 1, 12 degrees“TI” DMD, 0.7” x 1, 12 degrees Resolut on SVGA 800 x 600 nat ve XGA 1024 x 768 nat ve Bandw dth Up to SXGA 1280 x 1024 @ 60 Hz Color 16.7 M ll on (24-b ts/p xel) We ght 2.64 kg (5.84 lbs) 2.66 kg (5.87 lbs) Project on d stance 1...
Page 48
41ViewSonic PJ588D/PJ568D/PJ508D Projection Distance versus Projection Size PJ508D/PJ568D Projection DistanceMax. Screen Size1.89Min. Screen Size2.18 DiagonalWidth AHeight CDiagonalWidth BHeight...
Page 49
42ViewSonic PJ588D/PJ568D/PJ508D PJ588D Projection DistanceMax. Screen Size1.8Min. Screen Size2.1DiagonalWidth AHeight CDiagonalWidth BHeight D1,00m0,69m0,56m0,42m0,60m0,48m0,36m 3,28’27,34’’21,87’’16,40’’23,43’’18,75’’14,06’’ 1,50m1,04m0,83m0,63m0,89m0,71m0,54m 4,92’41,01’’32,81’’24,61’’35,15’’28,12’’21,09’’ 2,40m1,67m1,33m1,00m1,43m1,14m0,86m 7,87’65,62’’52,49’’39,37’’56,24’’44,99’’33,75’’ 2,80m1,94m1,56m1,17m1,67m1,33m1,00m 9,18’76,55’’61,24’’45,93’’65,62’’52,49’’39,37’’...
Page 50
43ViewSonic PJ588D/PJ568D/PJ508D Timing Mode Table The nat ve resolut on s 800 x 600 for the SVGA ser es and 1024 x 768 for the XGA ser es. Resolut on other than nat ve mode may d splay w th uneven s ze of text or l nes. The follow ng table shows the supported t m ng modes. SignalResolutionFrequency H. ( KHz )Frequency V. ( Hz )VideoDigitalAnalog VESA 640 x 480 (CVT)24.650--ΟΟ 720 x 40031.570.0--ΟΟ 720 x 40037.985.0--ΟΟ 640 x...