ViewSonic Projector PJ588D User Manual

14ViewSonic	 PJ588D/PJ568D/PJ508D

Adjusting the Projector Level
Take	note	of	the	follow ng	when	sett ng	up	the	projector:
•The projector table or stand should be level and sturdy.
•Position the projector so that it is perpendicular to the screen.
•Be sure cables are not in the way or can not cause the projector to be knocked over.
1.To raise the level of the projector, lift the projector upwards and press the height adjuster button 
[B] to allow the height adjuster [C] to drop.
2.To  lower...

15ViewSonic	 PJ588D/PJ568D/PJ508D

Adjust the Zoom, Focus and Keystone
1.Use the Image-zoom control [A] (on 
the projector only) to resize the projected 
image and screen size.
2.Use the Image-focus control [B] (on 
the projector only) to sharpen the pro-
jected image.
3.Use the Keystone buttons (on the pro-
jector or the remote control) to correct 
image-trapezoid (wider top or bottom) 
effect.
 
The keystone control appears on the 
display. 

16ViewSonic	 PJ588D/PJ568D/PJ508D

Adjusting the Volume
1.Press the Volume +/- but-
tons on the projector or the 
remote control.  
The volume control appears 
on the display.
2.Use the Volume +/- buttons 
to adjust the level.
3.Press the Mute button (on 
the remote control only) to 
turn off the volume. 
4.Press Volume +/- or Mute 
on the remote control to turn 
off mute. 

17ViewSonic	 PJ588D/PJ568D/PJ508D

ON-SCREEN DISPLAY MENU SETTINGS
On-Screen Display Menu Controls
The	projector	has	an	On-Screen	D splay	(OSD) 	that	lets	you	make	mage	adjustments	and	change	
var  ous	sett  ngs.	
Navigating the OSD
You	can	use	the	remote	control	or	the	buttons	on	the	top	of	the	projector	to	nav  gate	and	make	
changes	to	the	OSD.	The	follow  ng	llustrat  on	shows	the	correspond  ng	buttons	on	the	remote	control	
and	on	the	projector.
A.  To...

18ViewSonic	 PJ588D/PJ568D/PJ508D

OSD Menu Overview
Use	the	follow ng	llustrat  on	to	qu ckly	find	a	sett  ng	or	determ  ne	the	range	for	a	sett ng.
Brghtness0	~	100(1)	Auto	*Contrast0	~	100(2)	NTSC(1)	1(3)	PAL(2)	2(4)	SECAM(3)	3	*(1)	Front(4)	4(2)	Rear(5)	5(3)	Front	&	CelngColor	Temperature(4)	Rear	&	CelngColor	Saturaton0	~	100FrequencyColor	Tne0	~	100Trackng0	~	100(1)	PC	*Dgtal	Zoom(2)	MACReset(3)	Vdeo(4)...

19ViewSonic	 PJ588D/PJ568D/PJ508D

Setting the OSD Language
You	may	want	to	reference	the	OSD	on	your	projector	wh le	read  ng	th s	sect  on.	Set	the	OSD	
language	to	your	preference	before	cont  nu  ng.	 (The	default	language	s	Engl  sh.)
1.Press the Menu button. The Main menu appears.
2.Press the cursor  button until Language is highlighted. 
3.Press the  until your language is displayed. Range: English – Italiano.
4.Press the cursor  button to confirm the...

20ViewSonic	 PJ588D/PJ568D/PJ508D

Main Menu 
Press	the	Menu	button	to	open	the	OSD	menu.	Press	the	cursor		button	to	move	to	the	Main	
menu.	Press	the	cursor		button	to	move	up	and	down	n	the	Main	menu. 	Press		to	
change	values	for	sett  ngs.
ITEMDESCRIPTIONDEFAULT
BrightnessPress the cursor  button to adjust the brightness (Range: 0 – 100)50
ContrastPress the cursor  button to adjust the contrast (Range: 0 – 100)50
SharpnessPress the cursor  button to adjust the display...

21ViewSonic	 PJ588D/PJ568D/PJ508D

Main Menu Functions Available for Connected Source
FunctionRGBComponent VideoComposite VideoS-Video
Br

ghtness
xxxx
Contrastxxxx
Sharpnessxxxx
Color	Tempxxxx
Color	Saturat  onxxx
Color	T ntxxx
Gammaxxxx
Color	Spacexxxx
Resetxxxx
x
	
=
	
ava

lable
	
to
	
v

deo
	
source
Color Temperature
Press	the	Menu	button	to	open	the	OSD	menu. 	Press	to	move	to	the	Main	menu.	Press	
	to	move	to	the	Color Temperature menu	and	then	press	Enter or	....

22ViewSonic	 PJ588D/PJ568D/PJ508D

Setup Menu 
Press	the	Menu	button	to	open	the	OSD	menu.	Press	the	cursor		button	to	move	to	the	Setup	
menu.	Press	the	cursor		button	to	move	up	and	down	n	the	Setup	menu. 	Press		to	
change	values	for	sett  ngs.
ITEMDESCRIPTIONDEFAULT
Horizontal PositionPress the cursor  button to move the image left or right (Range: 0 – 100)50
Vertical  PositionPress the cursor  button to move the image up or down (Range: 0 – 100)50
KeystonePress the cursor ...

23ViewSonic	 PJ588D/PJ568D/PJ508D

Advanced Feature
Press	the	Menu	button	to	open	the	OSD	menu.	Press		to	move	to	the	Setup	menu.	Press	
	to	move	to	the	Advanced Feature	menu	and	then	press	Enter or	.	Press		to	move	
up	and	down	n	the	Advanced Feature	menu. 	Press		to	change	values	for	sett  ngs.
ITEMDESCRIPTIONDEFAULT
User Color
This feature adjusts the color balance in each color of RGB (red, green\
, blue), and their neutral colors (cyan, magenta, yellow, white) by using color...