ViewSonic Projector PJ1165 User Manual

							ViewSonic  PJ116520
Freezing The Screen
NOTE
• If the projector continues projecting the same image for a long time (i.e. you forget to exit 
FREEZE mode), the image might possibly remain as an afterimage. Do not leave the 
projector in FREEZE mode for too long.
Using The Magnify Feature
1Press the FREEZE button.
As illustrated on the right, a dialog 
will appear on the screen, and the 
screen will freeze at the current 
image.
2Press the FREEZE button again to 
restore the screen to normal.
The icon “||” will change to the icon “X”. And after a couple 
of seconds, the dialog will be closed and the screen will be 
restored to normal.
memo The freezing feature will automatically finish if a remote 
control’s button that changes some display state (ex. 
blanking the screen, displaying a dialog or a menu, 
adjusting the picture, changing the input signal) is pressed, 
or a button of projector is pressed.
1Press the MAGNIFY  button.
As illustrated on the right, a dialog 
will appear on the screen to aid you 
in magnifying the picture.
2Press the POSITION button, then 
use the cursor buttons S/T/W/X to 
select the area to zoom.
3Press the POSITION button again to finalize the zoom 
area.
4Use the cursor buttons S/T to adjust the zoom level.
5Press the MAGNIFY   button to close the dialog and 
restore the screen to normal.
memo The magnify feature will automatically finish if the 
automatic adjustment is execute, or the aspect, the signal 
type mode of video or the signal input state is changed.
FREEZE 
button
POSITION 
button Cursor 
buttons
MAGNIFY 
buttons 
						

							ViewSonic  PJ116521
Displaying The Child Window
memo This feature called “PinP (Picture in Picture)” is available only when a RGB signal is 
selected to main screen.
Selecting An Audio Input
memo This feature is available only when the child window is on the screen.
1Press the PinP button.
The child window with a picture of a video signal will 
appear.
2Press the PinP button again to change the size of the child 
window or close the window.
       Small child window  
						

							ViewSonic  PJ116522
Multifunctional Settings
Using The Menu Functions
This projector has the following menus: MAIN, PICTURE-1, PICTURE-2, INPUT, AUTO, 
SCREEN, OPTION and NETW ORK. Each of these menus is operated using the same 
methods. The basic operations of these menus are as follows.
1Press the MENU 
button. The menu will 
appear on the screen.
2Use the cursor 
buttons S/T to 
select a menu, then 
press the X (or the 
ENTER) button to 
progress.
The display of the 
selected menu will 
appear.
3Use the cursor 
buttons S/T to 
select an item, then 
press the X (or the 
ENTER) button to 
progress.
The operation display 
of the selected item 
will appear.ex. Turning off the built-in speaker
1) Press the MENU button.
2) Select the “OPTION” using the T 
button, then press the X button.
3) Select the “SPEAKER” using the T 
button, then press the X button.
4Use the cursor buttons S/T to operate the 
item.
memo When you want to reset the 
adjustment, press the RESET button 
during the operation. Note that the items 
whose functions are performed 
simultaneously with operating (ex. 
LANGUAGE, WHISPER, H PHASE etc.) 
are not reset.
memo When you want to return to the 
previous display, press the W button or 
ESC button.4) Use the cursor button T to select the 
“TURN OFF”.
5Press the MENU button again to close the 
menu display and complete this operation.
memo Even if you don’t do anything, the 
menu will automatically disappear after a 
few seconds.5) Press the MENU button again.
Cursor 
buttons
MENU 
button
RESET 
button
ESC 
button
X/
ENTER 
button 
						

							ViewSonic  PJ116523
MAIN Menu
With the MAIN menu, the items shown in the table below can be 
performed. Perform each operation in accordance with the 
instructions in the table below.
Item Description
BRIGHT Adjust the brightness using the S/T buttons.: 
    Light 
						

							ViewSonic  PJ116524
PICTURE-1 Menu
With the PICTURE-1 menu, the items shown in the table below 
can be performed. Perform each operation in accordance with the 
instruct ions in the table below.
(This table is continued to the following page.) Item Description
GAMMA Select a gamma mode using the S/T buttons.: 
    NORMAL 
						

							ViewSonic  PJ116525
PICTURE-1 Menu (Continued)
Item Description
MY MEMORY Select a command to load or save using the S/T buttons, and then 
press the X (or the ENTER) button to perform the function.:
   
This projector has 4 numbered memories for adjustment data. 
Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the current 
adjustment data on the memory whose number corresponds with the 
command’s number.
Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on 
the memory whose number corresponds with the command’s number, 
and adjusts the picture automatically depending on the data.
RESET Select the EXECUTE using the S button to reset the PICTURE-1 
menu items.: 
    EXECUTE 
						

							ViewSonic  PJ116526
PICTURE-2 Menu
With the PICTURE-2 menu, the items shown in the table below 
can be performed. Perform each operation in accordance with the 
instruct ions in the table below.
memo This menu cannot be selected at a M1-D signal.
Item Description
V POSITION Adjust the vertical position using the S/T buttons.: 
    Up 
						

							ViewSonic  PJ116527
INPUT Menu
With the INPUT menu, the items shown in the table below can be 
performed. Perform each operation in accordance with the 
instructions in the table below.
(This table is continued to the following page.) Item Description
COLOR SPACE Select a color space mode using the S/T buttons.:
    AUTO 
						

							ViewSonic  PJ116528
INPUT Menu(Continued)
Item Description
P.IN P. INPUT Select a signal input port for the child window using the S/T buttons.: 
    VIDEO 
						

							ViewSonic  PJ116529
AUTO Menu
With the AUTO menu, the items shown in the table below can be 
performed. Perform each operation in accordance with the 
instructions in the table below.
(This table is continued to the following page.) Item Description
ADJUST Pressing the X (or the ENTER) button performs the automatic 
adjustment.