ViewSonic Projector PJ1165 User Manual

ViewSonic  PJ116510
Examples of connection with a VCR/DVD Player
VCR/DVD PlayerProjector
Audio out (R)
Audio out (L)
Video out

ViewSonic  PJ116511
Connecting to a monitor
Connecting to a speaker (with amplifier)
Connecting The Power Supply
1Connect the connector of the power cord 
to the AC inlet of the projector.
2Firmly plug the power cord’s plug into the 
outlet.
 WA R N I N G
• Use extra caution when connecting the power cord as incorrect or faulty connections 
may result in fire and/or electrical shock. Please adhere to the “Quick Start Guide” and 
the following.
• Only plug the power cord into outlets rated for use with...

ViewSonic  PJ116512
Remote Control
About The Laser Pointer
This remote control has a laser pointer in place of a finger or rod. The laser beam works 
and the LASER INDICATOR lights while the LASER button is pressed.
Putting Batteries
 WA R N I N G
• The laser pointer of the remote control is used in place of a finger or rod. Never look 
directly into the laser beam outlet or point the laser beam at other people. The laser 
beam can cause vision problems.
 CAUTION
• Use of controls or adjustments or...

ViewSonic  PJ116513
Operating The Remote Control
NOTE
• Replace the batteries whenever the remote control starts to malfunction.
• When strong lights, such as direct sunlight or light from an extremely close range (such 
as from an inverter fluorescent lamp), hit the projector’s remote sensor, the remote 
control may cause to function. Adjust the direction of the projector to keep light from 
directly hitting the projector’s remote sensor.
The remote control works with the 
projector’s remote sensors....

ViewSonic  PJ116514
Using The Mouse/Keyboard Control Function
Using the USB control feature, you can use the remote control as a simplified mouse or 
keyboard of the computer.
Connect the USB port of the projector to the computer via the USB cable.
memo The USB control can be used with 
Windows 95 OSR 2.1 or higher. It may 
not be possible to use the remote 
control, depending on the computer’s 
configurations and mouse drivers.
memo The function can be used only for the 
functions illustrated on the...

ViewSonic  PJ116515
Power On/Off
NOTE
• Turn the power on/off in right order. Please power on the projector before the connected 
devices. Power off the projector after the connected devices.
Turning On The Power
1Remove the lens cap.
2Set the power switch to [ | ] (On).
The STANDBY/ON indicator will light to solid 
orange.
3Press the STANDBY/ON button.
The projector lamp will light up and the 
STANDBY/ON indicator will begin blinking green. 
When the power is completely on, the indicator 
will stop...

ViewSonic  PJ116516
Operating
Selecting An Input Signal
1Select an input signal.

ViewSonic  PJ116517
Selecting The Aspect Ratio
1Press the ASPECT button to toggle between the modes for 
aspect ratio.

ViewSonic  PJ116518
Adjusting The Picture Position
memo This function is available only for RGB signals.
Correcting The Keystone Distortion
1Press the POSITION button.
As illustrated on the right, a dialog 
will appear on the screen to aid you 
in adjusting the picture position.
2Use the cursor buttons S/T/W/X to 
adjust the position.
memo When you want to initialize the position, press the 
RESET button during adjustment.
3Press the POSITION button again to close the dialo and 
complete this operation....

ViewSonic  PJ116519
Adjusting The Volume
Muting The Sound
Temporarily Blanking The Screen
1Press the VOLUME button.
As illustrated on the right, a dialog will appear 
on the screen to aid you in adjusting the 
volume.
2Use the cursor buttons S/T to adjust the 
volume.
3Press the VOLUME button again to close the dialog and 
complete this operation.
memo Even if you don’t do anything, the dialog will 
automatically disappear after a few seconds.
1Press the MUTE button.
As illustrated on the right, a dialog...