ViewSonic Pro10100 Projector User Manual
Have a look at the manual ViewSonic Pro10100 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 617 ViewSonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 56
55
Remote code: show the remote code of the projector.
Remote code(Active): show the remote code of the remote control.
Reset
Choose “Yes” to return the display parameters on all menus to the \
factory default
settings.
The following settings will still remain: Phase, H. Size, User, Language\
, Projector
Position, High Altitude Mode, Security Settings, and Keystone.
OPTIONS | Lamp Settings
Lamp Hours
Display the projection time.
Lamp Reminder
Choose this function to show or to hide the warning...](http://img.usermanuals.tech/thumb/80/97292/w64_viewsonic-pro10100-manual_d-55.png "Page 56
55
Remote code: show the remote code of the projector.
Remote code(Active): show the remote code of the remote control.
Reset
Choose “Yes” to return the display parameters on all menus to the \
factory default
settings.
The following settings will still remain: Phase, H. Size, User, Language\
, Projector
Position, High Altitude Mode, Security Settings, and Keystone.
OPTIONS | Lamp Settings
Lamp Hours
Display the projection time.
Lamp Reminder
Choose this function to show or to hide the warning...")
![Page 57
56
OPTIONS | Remote Settings
My Button
Choose your desired function from “BrilliantColor”, “Gamma”,\
"DynamicBlack",
"Color Temp.", "Projection", "Projector ID" or “HDMI Cable”.
Top IR Function
When this function is “On”, the projector can be operated by the r\
emote control from
top IR receiver.
By selecting “Off”, you will be able to use the control panel keys\
or operate by the
remote control from front IR receiver.
Front IR Function
When this function is “On”, the...](http://img.usermanuals.tech/thumb/80/97292/w64_viewsonic-pro10100-manual_d-56.png "Page 57
56
OPTIONS | Remote Settings
My Button
Choose your desired function from “BrilliantColor”, “Gamma”,\
\"DynamicBlack\",
\"Color Temp.\", \"Projection\", \"Projector ID\" or “HDMI Cable”.
Top IR Function
When this function is “On”, the projector can be operated by the r\
emote control from
top IR receiver.
By selecting “Off”, you will be able to use the control panel keys\
or operate by the
remote control from front IR receiver.
Front IR Function
When this function is “On”, the...")
![Page 58
57
OPTIONS | Advanced
Direct Power On
Choose “On” to activate Direct Power mode. The projector will auto\
matically power
on when AC power is supplied, without pressing the “
” key on the projector control
panel or on the remote control.
Auto Power Off
Sets the countdown timer interval. The countdown timer will start, when \
there is no
signal being sent to the projector. The projector will automatically pow\
er off when
the countdown has finished (in minutes).
Sleep Timer
Sets the countdown timer...](http://img.usermanuals.tech/thumb/80/97292/w64_viewsonic-pro10100-manual_d-57.png "Page 58
57
OPTIONS | Advanced
Direct Power On
Choose “On” to activate Direct Power mode. The projector will auto\
matically power
on when AC power is supplied, without pressing the “
” key on the projector control
panel or on the remote control.
Auto Power Off
Sets the countdown timer interval. The countdown timer will start, when \
there is no
signal being sent to the projector. The projector will automatically pow\
er off when
the countdown has finished (in minutes).
Sleep Timer
Sets the countdown timer...")
![Page 59
58
Troubleshooting
Appendices
If you experience a problem with your projector, please refer to the
following information. If a problem persists, please contact your local \
reseller or service center.
Image Problems
No image appears on-screen
` Ensure all the cables and power connections are correctly and securely
connected as described in the “Installation” section.
` Ensure the pins of connectors are not crooked or broken.
` Check if the projection lamp has been securely installed.
` Make...](http://img.usermanuals.tech/thumb/80/97292/w64_viewsonic-pro10100-manual_d-58.png "Page 59
58
Troubleshooting
Appendices
If you experience a problem with your projector, please refer to the
following information. If a problem persists, please contact your local \
reseller or service center.
Image Problems
No image appears on-screen
` Ensure all the cables and power connections are correctly and securely
connected as described in the “Installation” section.
` Ensure the pins of connectors are not crooked or broken.
` Check if the projection lamp has been securely installed.
` Make...")
![Page 60
59
` If you are using a Notebook:
- First, follow the steps above to adjust resolution of the computer.
- Press the toggle output settings. example: [Fn]+[F4]
Notebook Brand Function Keys
Acer [Fn]+[F5]
Asus [Fn]+[F8]
Dell [Fn]+[F8]
Gateway [Fn]+[F4]
IBM/Lenovo [Fn]+[F7]
HP/Compaq [Fn]+[F4]
NEC [Fn]+[F3]
Toshiba [Fn]+[F5]
Mac Apple System Preference -> Display ->
Arrangement -> Mirror display
` If you experience difficulty changing resolutions or your monitor freezes,
restart all equipment...](http://img.usermanuals.tech/thumb/80/97292/w64_viewsonic-pro10100-manual_d-59.png "Page 60
59
` If you are using a Notebook:
- First, follow the steps above to adjust resolution of the computer.
- Press the toggle output settings. example: [Fn]+[F4]
Notebook Brand Function Keys
Acer [Fn]+[F5]
Asus [Fn]+[F8]
Dell [Fn]+[F8]
Gateway [Fn]+[F4]
IBM/Lenovo [Fn]+[F7]
HP/Compaq [Fn]+[F4]
NEC [Fn]+[F3]
Toshiba [Fn]+[F5]
Mac Apple System Preference -> Display ->
Arrangement -> Mirror display
` If you experience difficulty changing resolutions or your monitor freezes,
restart all equipment...")
![Page 62
61
Projector Problems
The projector stops responding to all controls
` If possible, turn off the projector, then unplug the power cord and wait\
at
least 60 seconds before reconnecting power.
` Check that “Keypad Lock” is not activated by trying to control the\
projector
with the remote control.
Lamp burns out or makes a popping sound
` When the lamp reaches its end of life, it will burn out and may make a l\
oud
popping sound. If this happens, the projector will not turn on until the\...](http://img.usermanuals.tech/thumb/80/97292/w64_viewsonic-pro10100-manual_d-61.png "Page 62
61
Projector Problems
The projector stops responding to all controls
` If possible, turn off the projector, then unplug the power cord and wait\
at
least 60 seconds before reconnecting power.
` Check that “Keypad Lock” is not activated by trying to control the\
projector
with the remote control.
Lamp burns out or makes a popping sound
` When the lamp reaches its end of life, it will burn out and may make a l\
oud
popping sound. If this happens, the projector will not turn on until the\...")
![Page 64
63
Step 6: To open Internet Options, click IE web browser, click Internet Options, click the Connections tab and click “LAN Setting…”.
Step 7: All items in the Local Area Network (LAN) Setting window must unchecked. Then click “OK” button twice.
Step 8: Connect a cat5 Ethernet cross-over cable between the projector a\
nd the computer.](http://img.usermanuals.tech/thumb/80/97292/w64_viewsonic-pro10100-manual_d-63.png "Page 64
63
Step 6: To open Internet Options, click IE web browser, click Internet Options, click the Connections tab and click “LAN Setting…”.
Step 7: All items in the Local Area Network (LAN) Setting window must unchecked. Then click “OK” button twice.
Step 8: Connect a cat5 Ethernet cross-over cable between the projector a\
nd the computer.")
![Page 66
65
Replacing the Lamp
A warning message will be displayed once the lamp has surpassed life exp\
ectancy.
At this point, it is recommended to change the lamp as soon as possible.\
Please
contact your local reseller or ViewSonic to acquire a lamp.
Type number: RLC-087
Warning: If ceiling mounted, please use caution when opening the lamp
access panel. It is recommended to wear safety glasses if changing the
bulb when ceiling mounted. “Caution must be used to prevent any loose\
parts from falling out...](http://img.usermanuals.tech/thumb/80/97292/w64_viewsonic-pro10100-manual_d-65.png "Page 66
65
Replacing the Lamp
A warning message will be displayed once the lamp has surpassed life exp\
ectancy.
At this point, it is recommended to change the lamp as soon as possible.\
Please
contact your local reseller or ViewSonic to acquire a lamp.
Type number: RLC-087
Warning: If ceiling mounted, please use caution when opening the lamp
access panel. It is recommended to wear safety glasses if changing the
bulb when ceiling mounted. “Caution must be used to prevent any loose\
parts from falling out...")
60 Image has vertical flickering bar ` Use “Frequency” to make an adjustment. ` Check and reconfigure the display mode of your graphic card to make it compatible with the projector. Image is out of focus ` Make sure the lens cover is removed. ` Adjust the Focus function for the projector lens. ` Make sure the projection screen is between the required distance. The image is stretched when displaying 16:9 DVD title ` When you play anamorphic DVD or 16:9 DVD, the projector will show the best image when the projector display mode is set to 16:9 in the OSD. ` If you play 4:3 format DVD titles, please change the format to 4:3 in th\ e projector OSD. ` If the image is still stretched, you will also need to adjust the aspect\ ratio by referring to the following: ` Please setup the display format as 16:9 (wide) aspect ratio type on yo\ ur DVD player. Image is too small or too large ` Move the projector closer to or further from the screen. ` Press “Menu” on the control panel. Go to “SCREEN” --> “As\ pect”and try the different settings. Image has slanted sides: ` If possible, reposition the projector so that it is centered on the scre\ en and below the bottom of the screen. ` Press the "Keystone" button on the remote control, until the sides are vertical. Image is reversed ` Adjust the “SETTING" --> "Projection” to correct it.
61 Projector Problems The projector stops responding to all controls ` If possible, turn off the projector, then unplug the power cord and wait\ at least 60 seconds before reconnecting power. ` Check that “Keypad Lock” is not activated by trying to control the\ projector with the remote control. Lamp burns out or makes a popping sound ` When the lamp reaches its end of life, it will burn out and may make a l\ oud popping sound. If this happens, the projector will not turn on until the\ lamp module has been replaced. To replace the lamp, follow the procedures in \ the “Replacing the Lamp” section. If the remote control does not work ` Check if the operating angle of the remote control is within ±30° \ both horizontally and vertically on one of the IR receivers on the projector.\ ` Make sure there is no obstruction between the remote control and the projector. Move to within 12 m (±0°) of the projector. ` Make sure the batteries are inserted correctly. ` Replace batteries if they are exhausted. ` Ensure that you have set your remote to the correct IR code setting. When making a direct connection from your computer to the projector ` If you have network connection problem from your computer to the projector, please refer to the computer setting as below or contact with\ web administrator. Step 1: Find an IP Address (192.168.0.100) from LAN function of projec\ tor. Step 2: Select “Apply” and push the “Enter” button. Once the\ setting is saved, exit the OSD by pushing “Menu” button. Step 3: To open Network Connections, click Start, click Control Panel, click Network and Internet Connections , and then click Network Connections. Click the connection you want to configure, and then, under Network Tasks , click Change settings of this connection .
62 Step 4: On the General tab, under This connection use the following items, click Internet Protocol(TCP/IP), and then click “Properties”. Step 5: Click Use the following IP address , and type in as below: 1) IP address: 192.168.0.101 2) Subnet mask: 255.255.255.0 3) Default gateway: 192.168.0.254
63 Step 6: To open Internet Options, click IE web browser, click Internet Options, click the Connections tab and click “LAN Setting…”. Step 7: All items in the Local Area Network (LAN) Setting window must unchecked. Then click “OK” button twice. Step 8: Connect a cat5 Ethernet cross-over cable between the projector a\ nd the computer.
64 On Screen Messages y Power off confirm y Lamp error y Lamp Life warning y Filter error
65 Replacing the Lamp A warning message will be displayed once the lamp has surpassed life exp\ ectancy. At this point, it is recommended to change the lamp as soon as possible.\ Please contact your local reseller or ViewSonic to acquire a lamp. Type number: RLC-087 Warning: If ceiling mounted, please use caution when opening the lamp access panel. It is recommended to wear safety glasses if changing the bulb when ceiling mounted. “Caution must be used to prevent any loose\ parts from falling out of projector.” Warning: Lamp compartment is hot! Allow it to cool down before changing lamp! Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped.
66 Lamp Replacing Procedure: 1. Switch off the power to the projector by pressing the “” button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Unscrew the two screws on the lamp door. 1 5. Open and pull up the lamp door. 2 6. Unscrew the three screws on the lamp housing. 3 7. Pull out the lamp module slowly and carefully. 4 To replace the lamp module, reverse the previous steps. 8. Turn on the projector and use “Lamp Reset” after the lamp module is replaced. Lamp Reset: (i) Press “Menu” (ii) Select “OPTIONS” (iii) Select “Lamp Settings” (iv) Select “Lamp Reset” (v) Select “Yes”. 1 23 4
67 Replacing the Filter Filter Replacing Procedure: 1. Switch off the power to the projector by pressing the “” button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Unscrew the four screws on the filter cover and pull out the cover . 1 5. Remove the old filter and replace it with the new one. 2 6. Attach the filter cover and secure it with the four included screws. 2 1
68 Compatibility Modes ` Computer Compatibility (PC) Signal Resolution Frequency H. (KHz) Refresh Rate (Hz) Video DigitalAnalog Remark NTSC -15.734 60○-- PAL/SECAM -15.625 50○-- 640 x 350 31.570.1 ○○ 70Hz 640 x 400 37.985.1 ○○ 85Hz 720 x 400 31.570 ○○ 720 x 400 37.985 ○○ 720 x 576 50○○ VGA 640 x 480 31.560 ○○ VGA 640 x 480 67○ ○ VGA 640 x 480 37.972.8 ○○ 72Hz VGA 640 x 480 37.575 ○○ VGA 640 x 480 43.385 ○○ SVGA 800 x 600 35.256.3 ○○ 56Hz SVGA 800 x 600 37.960.3 ○○ 60Hz SVGA 800 x 600 46.975 ○○ SVGA 800 x 600 48.172.2 ○○ 72Hz SVGA 800 x 600 53.785.1 ○○ 85Hz 832 x 624 75○○ XGA 1024 x 768 48.460 ○○ XGA 1024 x 768 56.570.1 ○○ 70Hz XGA 1024 x 768 6075 ○○ XGA 1024 x 768 68.785 ○○ 1152 x 864 75○○ HD720 1280 x 720 50○○ HD720 1280 x 720 60○○ WXGA 1280 x 768 47.460 ○○ WXGA 1280 x 768 75○○ WXGA 1280 x 768 85○○ WXGA-800 1280 x 800 60○○ SXGA 1280 x 1024 6460 ○○ SXGA 1280 x 1024 8075 ○○ SXGA 1280 x 1024 91.185 ○○ SXGA+ 1400 x 1050 60○- UXGA 1600 x1200 7560 ○○ HD1080 1920 x 1080 24○○ HD1080 1920 x 1080 50○○ HD1080 1920 x 1080 60○○ WUXGA 1920 x 1200 60○○Only support [RB] timing HDTV 1920 x 1080 33.830○-- 1920 x 1080 28.125○--
69 SignalResolution Frequency H. (KHz) Refresh Rate (Hz) Video DigitalAnalog Remark 1920 x 1080i 50-○ ○ 1920 x 1080i 60-○ ○ 1920 x 1080p 24-○ ○ 1920 x 1080p 25-○ ○ 1920 x 1080p 30-○ ○ 1920 x 1080p 50-○ ○ 1920 x 1080p 60-○ ○ 1280 x 720 4560○-- 1280 x 720p 50-○ ○ 1280 x 720p 60-○ ○ SDTV 720 x 576 31.350○-- 720 x 576i 50-○ ○ 720 x 576p 50-○ ○ 720 x 480 31.560○-- 720 x 480i 60-○ ○ 720 x 480p 60-○ ○ ` Computer Compatibility for MAC Resolution Refresh Rate (Hz) Macbook compatibility Macbook Pro (Intel) compatibility Power Mac G5 compatibility Power Mac G4 compatibility Digital Analog DigitalAnalog DigitalAnalog DigitalAnalog 800x600 60○○○○ --○ - 800x600 72○○○○ -○○○ 800x600 75○○○○ -○○○ 800x600 85○○ -○ -○ ○○ 1024x768 60○○○○ -○○○ 1024x768 70○○○○ -○○○ 1024x768 75○○○○ -○○○ 1024x768 85○○○○ -○○○ 1280x720 60○○○○ -○○○ 1280x768 60○○○○ ---○ 1280x768 75-○ -○ -○ ○○ 1280x768 85-○ -○ -- -○ 1280x800 60-○ -○ -○ ○○ 1280x1024 60○--○ -○ ○○ 1280x1024 75○--○ -○ ○ - 1920x1080 60○--○ -○ ○○ 1920x1200 (*1) 60○--○ -○ ○○ (*1)1920 x 1200 @60hz only support RB(reduced blanking).