ViewSonic Pled W500 Projector User Manual

							40
Sub Menu
Settings
Main Menu
 2I¿FH5HDGHU
 3URGXFWVLVRZQHGE\3LFVHOVXSSOLHUV
2.  The End User may not:
yMake copies of the Picsel Products or make them available for use by third parties.
y5HYHUVHHQJLQHHUGLVDVVHPEOHUHYHUVHWUDQVODWHRULQDQ\ZD\GHFRGHWKH3LFVHO3URGXFWV
or any copy or part of it in order to derive any source code, save only as is permitted by any 
applicable law.
3.  Picsel make no representations or warranties whether express or implied (by statute or otherwise) 
UHODWLQJWRWKHSHUIRUPDQFHTXDOLW\PHUFKDQWDELOLW\RU
						

							41
Main MenuSub MenuSettings
PhotoFile List
MusicFile List
VideoFile List
OfficeReaderFile List
Photo Setting Display Ratio Auto / Full
Slideshow Duration 5 Sec. / 15 Sec. / 30 Sec. / 1 Min. / 5 Min. / 15 Min.
Slideshow Repeat On / Off
Slideshow Effect Random / Snake / Partition / Erase / Blinds / Lines / 
GridCross / Cross / Spiral / Rect / Off
Music Setting Play Mode Once / Repeat Once / Repeat / Random
Show Spectrum On / Off
Auto Play Off / On
Video Setting Display Ratio Auto / Original Size
Play Mode Once / Repeat Once / Repeat / Random
Auto Play Off / On
Firmware Upgrade Setup
Structure
SETUP
Photo Setting
Access the photo settings.
Music Setting
Access the music settings.
Video Setting
Access the video settings.
Firmware Upgrade
7RGR¿UPZDUHXSJUDGH 
						

							42
SETUP | Photo Setting
Display Ratio
Press
{or
yto select the display ratio.
`YHUWLFDOGLUHFWLRQRI
the screen.
`Full: Fit full screen without keeping the original aspect ratio.
Slideshow Duration
Press
{or
yto select the slideshow duration.
Slideshow Repeat
`Choose “On” to repeat slideshow always.
`Choose “Off” to stop slideshow when it goes to the last page.
Slideshow Effect
Press
{or
yto select what slideshow effect you want. There are various kinds: 
Random, Snake, Partition, Erase, Blinds, Lines, GridCross, Cross, Spiral, Rect and 
Off. 
						

							43
SETUP | Music Setting
Play Mode
Press
{or
yto select the play mode.
`Once
`Repeat One
`Repeat
`Random
Show Spectrum
Choose “On” to show the spectrum plot while music is playing.
Auto Play
¿OHOLVW 
						

							44
SETUP | Video Setting
Display Ratio
Press
{or
yto select the display ratio.
`YHUWLFDOGLUHFWLRQRI
the screen.
`Full: Fit full screen without keeping the original aspect ratio.
Play Mode
Press
{or
yto select the play mode.
`Once
`Repeat One
`Repeat
`Random
Auto Play
¿OHOLVW 
						

							45
Internal Memory
Internal memory is a form of computer data storage.
File Transfer
File Transfer can transfer your computer’s data to the projector’s internal memory 
by using a single USB cable (mini B type to A type). Your computer will detect the 
projector’s “Internal Memory” as a storage device.
1. Press the “Enter” to select “File Transfer”.
2. Connection: Connect the USB cable to the mini USB of projector and USB type 
A of the computer.
3. After the projector’s memory is recognized by your computer, you can move 
U\
USB Display
USB Display (display over USB) can be easily operated to project a computer's 
screen by using a single USB cable (mini B type to A type) without any other drivers.
1. Choose source: Press the “SD/USB” button on the remote control to choose 
source from the mini USB connector.
2. Connection: Connect the USB cable to the mini USB of projector and USB type 
A of the computer.
3. Automatically projected: When detecting the computer, the screen will be auto-
matically projected out.
4. End the projection: When unplugging the USB cable, the projection will be 
stopped.
 Only one computer can be connected at one time. 
						

							46
Troubleshooting
Appendices
If you experience a problem with your projector, please refer to the follow-
ing information. If a problem persists, please contact your local reseller or 
service center.
Image Problems
No image appears on-screen
`Ensure all the cables and power connections are correctly and securely 
connected as described in the “Installation” section.
`Ensure the pins of connectors are not crooked or broken.
`Check if the projection lamp has been securely installed.
`Make sure you have removed the lens cap and the projector is switched on.
Partial, scrolling or incorrectly displayed image
`Press “Auto” on the remote control or on the control panel.
yIf you are using a PC:
- For Windows 95, 98, 2000, XP, Windows 7:
1. Open the “My Computer” icon, the “Control Panel” folder, and 
then double click on the “Display” icon.
2. Select the “Settings” tab.
3. Verify that your display resolution setting is lower than or equal to 
1080p.
4. Click on the “Advanced Properties”.
- For Windows Vista:
1. From the “My Computer” icon, open the “Control Panel” folder, 
and double click the “Appearance and Personalization”
2. Select “Personalization”.
3. Click “Adjust screen resolution” to display “Display Settings”. 
Click on the “Advanced Settings”. 
						

							47
- If the projector is still not projecting the whole image, you will also 
need to change the monitor display you are using. Refer to the 
following steps.
1. Select the “Change” under the “Monitor” tab.
2. Click on “Show all devices”. Next, select “Standard monitor types” 
under the SP box; choose the resolution mode you need under 
the “Models” box.
3. Verify that the resolution setting of the monitor display is lower 
than or equal to 1080p.
yIf you are using a Notebook:
- First, follow the steps above to adjust resolution of the computer.
- Press the toggle output settings. example: [Fn]+[F4]
Notebook Brand Function  Keys
Acer [Fn]+[F5]
Asus [Fn]+[F8]
Dell [Fn]+[F8]
Gateway [Fn]+[F4]
IBM/Lenovo [Fn]+[F7]
HP/Compaq [Fn]+[F4]
NEC [Fn]+[F3]
Toshiba [Fn]+[F5]
Mac AppleSystem Preference -> Display -> 
Arrangement -> Mirror display
yUIUHH]HV
restart all equipment including the projector.
The screen of the Notebook or PowerBook computer is not displaying 
your presentation
Some Notebook PCs may deactivate their own screens when a second display 
device is in use. Each has a different way to be reactivated. Refer to your 
computer’s documentation for detailed information.
,PDJHLVXQVWDEOHRUÀLFNHULQJ
`Adjust the “Phase” to correct it. Refer to the “SETTING | Signal” section for 
more information.
`Change the monitor color setting from your computer. 
						

							48
,PDJHKDVYHUWLFDOÀLFNHULQJEDU
`Use “Clock” to make an adjustment. Refer to the “SETTING | Signal” section 
for more information.
`DNHLW
compatible with the product.
Image is out of focus
`Make sure the lens cap is removed.
`Adjust the “Focus Ring” on the projector lens.
`Make sure the projection screen is within the required distance of 1.71-9.84 
feet (0.52-3.00 meters) from the projector.
The image is stretched when displaying 16:9 DVD title
When you play anamorphic DVD or 16:9 DVD, the projector will show the best 
image in 16: 9 format on projector side.
`If you play 4:3 format DVD title, please change the format as 4:3 in projector 
OSD.
`If the image is still stretched, you will also need to setup the display format 
as 16:9 (wide) aspect ratio type on your DVD player.
Image is too small or too large
`Move the projector closer to or further from the screen.
`Press “Menu” on the remote control or on the control panel. Go to “SCREEN” 
--> “Aspect Ratio”and try the different settings.
Image has slanted sides:
`If possible, reposition the projector so that it is centered on the screen and 
below the bottom of the screen.
`Use “SCREEN” --> “V Keystone” from the OSD to make an adjustment.
Image is reversed
`If the projector is mounted on the ceiling, select “SCREEN” --> “Auto Ceil 
Mount” from the OSD and adjust the projection direction.
`If the projector is placed on the desk, select “SETTING” --> “Orientation” 
from the OSD and adjust the projection direction. 
						

							49
Projector Problems
 The projector stops responding to all controls
`If possible, turn off the projector, then unplug the power cord and wait at 
least 20 seconds before reconnecting power.
Multi-media Problems
 USB/SD read fail
`Please make sure the USB device or SD card is good and well inserted. 
Remove to try for several times if necessary.
 USB drive fail
`USB does not support USB hub function and which power consumption is 
over 500mA.
 
`VHFKHFN
the media support table again in this manual.