Home > ViewSonic > Projector > ViewSonic Pled W500 Projector User Manual

ViewSonic Pled W500 Projector User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual ViewSonic Pled W500 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 617 ViewSonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							30
    SETTING | Signal (RGB)
    Phase
    Synchronize the signal timing of the display with the graphic card. If the image 
    LW
    Clock
    Change the display data frequency to match the frequency of your computer’s 
    FNHUYHUWLFDOO\
    H. Position
    `3UHVVWKH{EXWWRQWRPRYHWKHLPDJHOHIW
    `3UHVVWKHyEXWWRQWRPRYHWKHLPDJHULJKW
    V. Position
    `3UHVVWKH{EXWWRQWRPRYHWKHLPDJHGRZQ
    `3UHVVWKHyEXWWRQWRPRYHWKHLPDJHXS
     “H. Position” and “V. Position” ranges will depend on input source. 
    						
    							31
    SETTING | Advanced
    Logo
    Use this function to set the desired startup screen. If changes are made they will 
    take effect the next time the projector is powered on.
    `On: The default startup screen.
    `Off: No logo is displayed.
    Closed Caption
    Use this function to enable close caption and activate the closed caption menu. 
    Select an appropriate closed captions option: Off, CC1, CC2, CC3, CC4.
    Security
    Refer to page 32. 
    						
    							32
    SETTING | Advanced | Security
    Security
    `SURMHFWRU
    `Off: Choose “Off” to be able to switch on the projector without password 
    YHUL¿FDWLRQ
    Change Password
    `First time:
    yPressWKHyEXWWRQ to set the password.
    yThe password has to be 6 digits.
    yUse number buttons on the remote control to enter your new password and 
    then press “Enter”WRFRQ¿UPLW
    `Change Password:
    yPressWKHyEXWWRQ to input the old password.
    yUse number buttons to enter the current password and then press “Enter” to 
    FRQ¿UPLW
    yEnter a new password (6 digits in length) using the number buttons on the 
    remote control, then press “Enter”WRFRQ¿UPLW
    yEnter the new password again and press “Enter”WRFRQ¿UPLW
    `If the incorrect password is entered for 3 times, the projector will automatically 
    shut down.
    `RI¿FHIRUVXSSRUW 
    						
    							33
     3DVVZRUGGHIDXOWYDOXHLV³´¿UVWWLPH
     When you input the password, you must press the “Enter” button and other number button on the remote 
    control at the same time. 
    						
    							34
    OPTIONS
    Auto Source
    `On: The projector will search for other signals if the current input signal is lost.
    `Off: The projector will only search current input connection.
    Fan Mode
    `AUTO: The built-in fans automatically run at a variable speed according to the 
    internal temperature.
    `High Altitude: The built-in fans run at high speed. The built-in fans run at a high 
    speed. Select this option when using the projector at altitudes approximately 
    2500 feet/760 meters or higher.
    Information Hide
    `On: Choose “On” to hide the info message.
    `Off: Choose “Off” to show the “searching” message.
    Background Color
    Use this feature to display a “Black”or “Blue” screen when no signal is available.
    LED Settings
    Refer to page 36. 
    						
    							35
    Information
    Display the projector information for source, resolution, software version, color 
    space and aspect ratio on the screen.
    Advanced
    Refer to page 37.
    LED Calibration
    Use this function to adjust LED color performance. Please wait for 10 seconds to 
    ¿QLVKWKHZKLWHFRORU¿QHWXQHSURFHVV 
    						
    							36
    OPTIONS | LED Settings
    LED Hours Used
    Display the projection time.
    ECO Mode
    Choose “On” to dim the projector lamp which will lower power consumption and 
    extend the lamp life. Choose “Off” to return to normal mode.
    Clear LED Hours
    Reset the lamp hour counter after replacing the lamp. 
    						
    							37
    OPTIONS | Advanced
    Direct Power On
    Choose “On” to activate Direct Power mode. The projector will automatically power 
    on when AC power is supplied, without pressing the “
    ” buton on the projector 
    control panel or on the remote control.
    Auto Power Off (min)
    Sets the countdown timer interval. The countdown timer will start, when there is no 
    signal being sent to the projector. The projector will automatically power off when 
    WKHFRXQWGRZQKDV¿QLVKHGLQPLQXWHV
    Keypad Lock
    When the keypad lock function is “On”, the control panel will be locked. However, 
    the projector can be operated by the remote control. By selecting “Off”, you will be 
    able to reuse the control panel. 
    						
    							38
    Media Arena
    Media Arena is an interactive PC-less presentation solution. Through SD 
    card reader, USB connector and internal memory, you can easily access 
    various photo, video and music media formats (See format supported 
    table). The stylish user interface gives you the best experience while play-
    LQJPHGLD¿OHV
    How to operate
    1.7RRSHQWKH0HGLD$UHQDLQVHUWD6FDUG86%
    						
    							39
    SourceMain Menu
    Source
    Internal Memory USB SD Card
    Main Menu
    Photo Music Video
    2I¿FH5HDGHUSetup
    File Transfer/
    USB Display
    Connect PC File Transfer
    File Transfer/USB Display 
    						
    All ViewSonic manuals Comments (0)

    Related Manuals for ViewSonic Pled W500 Projector User Manual