ViewSonic Pjd8353s Projector User Manual
Here you can view all the pages of manual ViewSonic Pjd8353s Projector User Manual. The ViewSonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
30
Auto Screen (12V Out)
Choose “On”, the down/up move of electronic screen will be related\
with power on/
off of Projector.
Test Pattern
Display a test pattern.
Security
Refer next page.
Reset
Choose “Yes” to return the parameters on all menus to the factory \
default settings.](http://img.usermanuals.tech/thumb/80/97274/w300_viewsonic-pjd8353s-manual_d-30.png "Page 31
30
Auto Screen (12V Out)
Choose “On”, the down/up move of electronic screen will be related\
with power on/
off of Projector.
Test Pattern
Display a test pattern.
Security
Refer next page.
Reset
Choose “Yes” to return the parameters on all menus to the factory \
default settings.")
30 Auto Screen (12V Out) Choose “On”, the down/up move of electronic screen will be related\ with power on/ off of Projector. Test Pattern Display a test pattern. Security Refer next page. Reset Choose “Yes” to return the parameters on all menus to the factory \ default settings.
Page 32
![Page 32
31
Setting | Security
Security
` On: Choose “On” to use security verification when turning on the projector.
` Off: Choose “Off” to be able to switch on the projector without pa\
ssword
verification.
Change Password
` First time:
y Press the ► button to set the password.
y The password has to be 6 digits.
y Use the ▲ or ▼
on the remote control to select your new password on the
screen and then press ► to confirm it.
` Change Password:
y Use the ▲ or ▼
on the remote control to enter...](http://img.usermanuals.tech/thumb/80/97274/w300_viewsonic-pjd8353s-manual_d-31.png "Page 32
31
Setting | Security
Security
` On: Choose “On” to use security verification when turning on the projector.
` Off: Choose “Off” to be able to switch on the projector without pa\
ssword
verification.
Change Password
` First time:
y Press the ► button to set the password.
y The password has to be 6 digits.
y Use the ▲ or ▼
on the remote control to select your new password on the
screen and then press ► to confirm it.
` Change Password:
y Use the ▲ or ▼
on the remote control to enter...")
31 Setting | Security Security ` On: Choose “On” to use security verification when turning on the projector. ` Off: Choose “Off” to be able to switch on the projector without pa\ ssword verification. Change Password ` First time: y Press the ► button to set the password. y The password has to be 6 digits. y Use the ▲ or ▼ on the remote control to select your new password on the screen and then press ► to confirm it. ` Change Password: y Use the ▲ or ▼ on the remote control to enter...
Page 33
32 SelectEnterExit Security Enter Security Code (6 digits) Incorrect security code Re-enter again Password default value is “0000” (first time).
Page 34
33 Mute ` Choose “On” to turn mute on. ` Choose “Off” to turn mute off. Volume ` Press the ◄ button to decrease the volume. ` Press the ► button to increase the volume. Microphone Volume ` Press the ◄ button to decrease the microphone Volume. ` Press the ► button to increase the microphone Volume. Volume VolumeMute Volume Microphone Volume Off Select EnterExit
Page 35
![Page 35
34
Logo
Use this function to set the desired startup screen. If changes are made\
they will
take effect the next time the projector is powered on.
` Default: The default startup screen.
` User: Use stored picture from “Logo Capture” function.
Logo Capture
Press ► button to capture an image of the picture currently displayed on screen.
Screen capture in progress...
Please wait...
For successful logo capture, please ensure that the onscreen image does \
not exceed the
projector’s native...](http://img.usermanuals.tech/thumb/80/97274/w300_viewsonic-pjd8353s-manual_d-34.png "Page 35
34
Logo
Use this function to set the desired startup screen. If changes are made\
they will
take effect the next time the projector is powered on.
` Default: The default startup screen.
` User: Use stored picture from “Logo Capture” function.
Logo Capture
Press ► button to capture an image of the picture currently displayed on screen.
Screen capture in progress...
Please wait...
For successful logo capture, please ensure that the onscreen image does \
not exceed the
projector’s native...")
34 Logo Use this function to set the desired startup screen. If changes are made\ they will take effect the next time the projector is powered on. ` Default: The default startup screen. ` User: Use stored picture from “Logo Capture” function. Logo Capture Press ► button to capture an image of the picture currently displayed on screen. Screen capture in progress... Please wait... For successful logo capture, please ensure that the onscreen image does \ not exceed the projector’s native...
Page 36
![Page 36
35
SelectEnterExit
Input
HDMI
VGA-A
VGA-B
S-Video
Composite
Auto Power Off (min)
Sets the countdown timer interval. The countdown timer will start, when \
there is no
signal being sent to the projector. The projector will automatically pow\
er off when
the countdown has finished (in minutes).
Lamp Setting
Refer to page 36.
Dynamic Black
` On: The pictures with the optimum contrast will be displayed by automati\
cally
providing aperture compensation and signal compensation to suit the pict\
ures...](http://img.usermanuals.tech/thumb/80/97274/w300_viewsonic-pjd8353s-manual_d-35.png "Page 36
35
SelectEnterExit
Input
HDMI
VGA-A
VGA-B
S-Video
Composite
Auto Power Off (min)
Sets the countdown timer interval. The countdown timer will start, when \
there is no
signal being sent to the projector. The projector will automatically pow\
er off when
the countdown has finished (in minutes).
Lamp Setting
Refer to page 36.
Dynamic Black
` On: The pictures with the optimum contrast will be displayed by automati\
cally
providing aperture compensation and signal compensation to suit the pict\
ures...")
35 SelectEnterExit Input HDMI VGA-A VGA-B S-Video Composite Auto Power Off (min) Sets the countdown timer interval. The countdown timer will start, when \ there is no signal being sent to the projector. The projector will automatically pow\ er off when the countdown has finished (in minutes). Lamp Setting Refer to page 36. Dynamic Black ` On: The pictures with the optimum contrast will be displayed by automati\ cally providing aperture compensation and signal compensation to suit the pict\ ures...
Page 37
![Page 37
36
Lamp Hours Used (Normal)
Display the projection time of normal mode.
Lamp Hours Used (ECO)
Display the projection time of ECO mode.
Lamp Life Reminder
` On: Choose “On” to show the lamp end of life warning message.
` Off: Choose “Off” to hide the lamp end of life warning message.
Lamp Power Mode
` Normal: Normal mode.
` ECO: Use this function to dim the projector lamp which will lower power \
consumption and extend the lamp life.
Clear Lamp Hours
Choose “Yes” to reset the lamp hour counter...](http://img.usermanuals.tech/thumb/80/97274/w300_viewsonic-pjd8353s-manual_d-36.png "Page 37
36
Lamp Hours Used (Normal)
Display the projection time of normal mode.
Lamp Hours Used (ECO)
Display the projection time of ECO mode.
Lamp Life Reminder
` On: Choose “On” to show the lamp end of life warning message.
` Off: Choose “Off” to hide the lamp end of life warning message.
Lamp Power Mode
` Normal: Normal mode.
` ECO: Use this function to dim the projector lamp which will lower power \
consumption and extend the lamp life.
Clear Lamp Hours
Choose “Yes” to reset the lamp hour counter...")
36 Lamp Hours Used (Normal) Display the projection time of normal mode. Lamp Hours Used (ECO) Display the projection time of ECO mode. Lamp Life Reminder ` On: Choose “On” to show the lamp end of life warning message. ` Off: Choose “Off” to hide the lamp end of life warning message. Lamp Power Mode ` Normal: Normal mode. ` ECO: Use this function to dim the projector lamp which will lower power \ consumption and extend the lamp life. Clear Lamp Hours Choose “Yes” to reset the lamp hour counter...
Page 38
37 3D 3D ` Auto: When a HDMI1.4a 3D timing identification signal is detected, the 3D image is selected automatically. ` Choose “Off” to disable 3D function. ` Choose “On” to enable 3D function. The 3D display performance will depend on the 3D glasses you applied. If the input signal is analog, the projector can not automatically identification signal to manually switch to the “on”. When “3D” is enabled, “Color Mode”, “Digital Zoom”, “Color Temp.”, “Dynamic Black” and “Interactive”...
Page 39
![Page 39
38
The Interactive function is available when displaying graphic source fro\
m HDMI/VGA input. Other sources
are not supported.
If “3D” function is enabling, “Interactive” feature is disab\
ling.
Interactive Settings
Use this feature to select the Interactive Pen function. Options are: “\
Off” and “IR
Camera”. Choose “Off” to disable the Interactive Pen function.
You need to unplug the Mini USB cable that connects NB/desktop with the \
projector
before using the Interactive function. After...](http://img.usermanuals.tech/thumb/80/97274/w300_viewsonic-pjd8353s-manual_d-38.png "Page 39
38
The Interactive function is available when displaying graphic source fro\
m HDMI/VGA input. Other sources
are not supported.
If “3D” function is enabling, “Interactive” feature is disab\
ling.
Interactive Settings
Use this feature to select the Interactive Pen function. Options are: “\
Off” and “IR
Camera”. Choose “Off” to disable the Interactive Pen function.
You need to unplug the Mini USB cable that connects NB/desktop with the \
projector
before using the Interactive function. After...")
38 The Interactive function is available when displaying graphic source fro\ m HDMI/VGA input. Other sources are not supported. If “3D” function is enabling, “Interactive” feature is disab\ ling. Interactive Settings Use this feature to select the Interactive Pen function. Options are: “\ Off” and “IR Camera”. Choose “Off” to disable the Interactive Pen function. You need to unplug the Mini USB cable that connects NB/desktop with the \ projector before using the Interactive function. After...
Page 40
![Page 40
39
LAN
LAN Settings
LAN SettingsDHCP
IP Address
Subnet Mask
Gateway
DNS
Store
Reset Off
Select
Enter Exit
` DHCP: If a DHCP server exists in the network to which the projector is
connected, the IP address will automatically be acquired when you select\
DHCP
On. If DHCP is Off, manually set the IP Address, Subnet Mask, and Gatewa\
y.
Use ▲ or ▼ to select the number of IP address, Subnet Mask, and Gateway.
` IP Address: Select an IP address.
` Subnet Mask: Configure the Subnet Mask of the LAN...](http://img.usermanuals.tech/thumb/80/97274/w300_viewsonic-pjd8353s-manual_d-39.png "Page 40
39
LAN
LAN Settings
LAN SettingsDHCP
IP Address
Subnet Mask
Gateway
DNS
Store
Reset Off
Select
Enter Exit
` DHCP: If a DHCP server exists in the network to which the projector is
connected, the IP address will automatically be acquired when you select\
DHCP
On. If DHCP is Off, manually set the IP Address, Subnet Mask, and Gatewa\
y.
Use ▲ or ▼ to select the number of IP address, Subnet Mask, and Gateway.
` IP Address: Select an IP address.
` Subnet Mask: Configure the Subnet Mask of the LAN...")
39 LAN LAN Settings LAN SettingsDHCP IP Address Subnet Mask Gateway DNS Store Reset Off Select Enter Exit ` DHCP: If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be acquired when you select\ DHCP On. If DHCP is Off, manually set the IP Address, Subnet Mask, and Gatewa\ y. Use ▲ or ▼ to select the number of IP address, Subnet Mask, and Gateway. ` IP Address: Select an IP address. ` Subnet Mask: Configure the Subnet Mask of the LAN...