ViewSonic Pjd8353s Projector User Manual

20
Using the Remote Control
1
2
3
4
5
7
6
9
12
13
1415
22
23
17
16
21
24
8
10
19
20
1118  

21
NameDescription
1 Power 
Power on/off the projector.
2 VGA Switch to VGA-A/VGA-B source.
3 Auto Sync Automatically synchronize the PC analog timing to its 
optimized condition.
4 Enter Activate or confirm the selected OSD function.
5 Four Directional 
Select Keys Press ▲▼◄► direction buttons to select items or 
make adjustments.
6 My Button Switch to the common functions.
7 Menu Launch or Exit the on-screen display(OSD).
8 Lock Lock the keypad function in Projector control panel, 
excluding the Power...

22
PictureColor Mode
Wall Color
Brightness
Contrast
Sharpness
Saturation
Hue
Gamma
Color Temp
Color SpaceBright
White
Low
Auto
Select
EnterExit
The Projector has multilingual On-screen Display menus that allow you to\
 
make image adjustments and change a variety of settings. The projector 
will automatically detect the source.
How to operate
1. To open the OSD menu, press the “Menu” button on the remote control\
 or on the 
control panel.
2.  When OSD is displayed, use the ◄►▲▼ buttons to select the...

23
PICTUREColor Mode
Brightest / PC / Movie / Game / User
Wall Color White / Light Yellow / Light Blue / Pink / Dark Green
Brightness 0~100
Contrast 0~100
Sharpness 0~31
Saturation 0~100
Hue 0~100
Gamma 0~3
Color Temp. Low / Mid / High
Color Space AUTO / RGB / YUV
SCREEN Aspect Ratio
AUTO / 4:3 / 16:9 / 16:10
Phase 0~31
Clock -50~50
H. Position -10~10
V. Position -10~10
Digital Zoom 1~10
V Keystone  -20~20
Ceiling Mount Front / Front Ceiling / Rear / Rear Ceiling
SETTING Language
Menu Location
Closed...

24
3Dn
O
 
/
 
f
f
O
 
/
 
O
T
U
A
D
3
n
O
 
/
 
f
f
O
t
r
e
v
n
I
 
D
3
3D  Forma t
1080p  @ 24 96Hz / 144Hz
I n teractiv e  
/
 
f
f
O
s
g
n
i
t
t
e
S
 
e
v
i
t
c
a
r
e
t
n
I F
ram e Packi ng  /  Sid e-by -Sid e (H alf) / T op  and 
Bot tom  / F ram e Se quent ial / F ield  Seque ntial
IR Camera
L A N n
O
 
/
 
f
f
O
P
C
H
D
s
g
n
i
t
t
e
S
 
N
A
L
IP Address 
Subnet  mask
Gatew ay
DNS
s
e
Y
 
/
 
o
N
e
r
o
t
S
s
e
Y
 
/
 
o
N
t
e
s
e
R
Main MenuSub MenuSettings  

25
Picture
Color Mode
There are many factory presets optimized for various types of images. Use the ◄ or 
► button to select the item. 
` Brightest: For brightness optimization.
 
` PC: For meeting presentation.
 
` Movie: For playing video content.
 
` Game: For game content.
 
` User: Memorize user’s settings.
Wall Color
Use this function to choose a proper color according to the wall. It wil\
l compensate 
the color deviation due to the wall color to show the correct image tone\
.
Brightness
Adjust...

26
Sharpness
Adjust the sharpness of the image. 
` Press the ◄ button to decrease the sharpness.
 
` Press the ► button to increase the sharpness.
Saturation
Adjust a video image from black and white to fully saturated color.
 
` Press the ◄ button to decrease the amount of saturation in the image.
 
` Press the ► button to increase the amount of saturation in the image.
Hue
Adjust the color balance of red and green.
 
` Press the ◄ button to increase the amount of green in the image.
 
` Press the ►...

27
Screen
Aspect Ratio
 
` Auto: Keep the image with original width-height ratio and maximize the image to 
fit native horizontal or vertical pixels.
 
` 4:3: The image will be scaled to fit the screen and displayed using a 4:3 ratio.
 
` 16:9: The image will be scaled to fit the width of the screen and the height 
adjusted to display the image using a 16:9 ratio.
 
` 16:10: The image will be scaled to fit the width of the screen and the height 
adjusted to display the image using a 16:10 ratio.
Phase...

28
Digital Zoom
Press the ◄ button to reduce the size of an image.
Press the ► button to magnify an image on the projection screen.
V Keystone
Press the ◄ or ► button to adjust image distortion vertically. If the image looks 
trapezoidal, this option can help make the image rectangular.
Ceiling Mount
 
` Front: The image is projected straight on the screen.
 
` Front Ceiling: This is the default selection. When selected, the image w\
ill turn 
upside down.
 
` Rear: When selected, the image will appear...

29
Setting
Language
Choose the multilingual OSD menu. Press the ◄ or ► button into the sub menu 
and then use the ▲ or ▼ button to select your preferred language. Press ► on the 
remote control to finalize the selection.
SelectEnterExit
Language
Menu Location
Choose the menu location on the display screen.
Closed Caption
Use this function to enable close caption menu. Select an appropriate cl\
osed 
captions option: Off, CC1, CC2, CC3, CC4.
VGA OUT (Standby)
Choose “On” to enable VGA OUT connection....