ViewSonic Pjd7583wi Projector User Manual

							
IMPORTANT:  Please read this User Guide to obtain important information on installing and using your product in a safe 
manner, as well as registering your product for future service.  
Warranty information contained in this User Guide will describe 
your limited coverage from ViewSonic Corporation, which is also  found on our web site at http://www.viewsonic.com in English, 
or in specific languages using the Regional selection box in the  upper right corner of our website.
“Antes de operar su equipo lea cuidadosamente las  instrucciones en este manual”
- User Guide
- Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell’utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
- Podręcznik użytkownika
- Pyководство пользователя
- Kullanιcι kιlavuzu
- 使用手冊(繁中)
-  使用手冊 (簡中)
-  사용자 안내서
PJD7383/ PJD7383i
PJD7583w/PJD7583wi DLP Projector
ViewSonic
®
Model No. : VS13339 
        VS13340 
						

							
i
Compliance Information
FCC Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 
(1) this device may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses, and can 
radiate radio frequency energy, and if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does cause harmful interference to radio 
or television reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures:
    •
  Reorient or relocate the receiving antenna.
    •
  Increase the separation between the equipment and receiver.
    •
    Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected.
    •
  Consult the dealer or an experienced radio/TV technician for help.
Warning:  You are cautioned that changes or modifications not expressly approved by the party 
responsible for compliance could void your authority to operate the equipment.
For Canada
    •
  This Class B digital apparatus complies with Canadian ICES-003.
    •
  Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CE Conformity for European Countries The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive 
2006/95/EC.
Following information is only for EU-member states:
The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 
2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment including any spent or 
discarded batteries or accumulators as unsorted municipal waste, but use the return and 
collection systems available.
If the batteries, accumulators and button cells included with this equipment, display the 
chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of 
more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead.
Industry Canada Notice
This wireless module device complies with Canadian RSS-210.To prevent radio interference to the 
licensed service, this device is intended to be operated indoors and away from windows to provide 
maximum shielding. Equipment (or its transmitting antenna) that is installed outdoors is subject to 
licensing. The installer of this radio equipment must ensure that the antenna is located or pointed such 
that it does not emit RF field in excess of Health Canada limits for the general population; consult 
Safety Code 6, obtainable from Health Canada’s web site www.hc-sc.gc.ca/rpb. 
						

							
ii
Important Safety Instructions
1.   Read these instructions.
2.    Keep these instructions.
3. 
  Heed all warnings.
4. 
  Follow all instructions.
5. 
  Do not use this unit near water.
6. 
    Clean with a soft, dry cloth.
7. 
    Do not block any ventilation openings. Install the unit in accordance with the 
manufacturer’s instructions.
8. 
    Do not install near any heat sources such as radiators, heat registers, stoves, or other 
devices (including amplifiers) that produce heat.
9. 
    Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized 
plug has two blades with one wider than the other. A grounding type plug has two 
blades and a third grounding prong. The wide blade and the third prong are provided 
for your safety. If the provided plug does not fit into your outlet, consult an electrician 
for replacement of the obsolete outlet.
10. 
    Protect the power cord from being walked on or pinched particularly at plugs. 
Convenience receptacles and the point where they exit from the unit. Be sure that the 
power outlet is located near the unit so that it is easily accessible.
11. 
    Only use attachments/accessories specified by the manufacturer.
12. 
    Use only with the cart, stand, tripod, bracket, or table specified by the 
manufacturer, or sold with the unit. When a cart is used, use caution when 
moving the cart/unit combination to avoid injury from tipping over .
13. 
    Unplug this unit when unused for long periods of time.
14. 
    Refer all servicing to qualified service personnel. Servicing is required when the unit 
has been damaged in any way, such as: if the power-supply cord or plug is damaged, 
if liquid is spilled onto or objects fall into the unit, if the unit is exposed to rain or 
moisture, or if the unit does not operate normally or has been dropped. 
						

							
iii
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/
EC of the European Parliament and the Council on restriction of the use of certain hazardous 
substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply 
with the maximum concentration values issued by the European Technical Adaptation 
Committee (TAC) as shown below: 
SubstanceProposed Maximum 
Concentration Actual Concentration
Lead (Pb) 0.1%< 0.1%
Mercury (Hg) 0.1%< 0.1%
Cadmium (Cd) 0.01%< 0.01%
Hexavalent Chromium (Cr 6+
) 0.1% < 0.1%
Polybrominated biphenyls (PBB) 0.1%< 0.1%
Polybrominated diphenyl ethers (PBDE) 0.1%< 0.1%
Certain components of products as stated above are exempted under the  Annex of the RoHS 
Directives as noted below:
Examples of exempted components are:
1. 
 Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps 
not specifically mentioned in the Annex of RoHS Directive.
2. 
 Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and 
electronic ceramic parts (e.g. piezoelectronic devices).
3. 
 Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or 
more lead).
4. 
 Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium 
containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by 
weight. 
						

							
1
Copyright Information
Copyright © ViewSonic® Corporation, 2010. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of 
Microsoft Corporation in the United States and other countries.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks 
of ViewSonic Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC 
are trademarks of VESA.
PS/2,  VGA and XGA are registered trademarks of International Business Machines Corporation.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or 
omissions contained herein; nor for incidental or consequential damages resulting from 
furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to 
change product specifications without notice. Information in this document may change without 
notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any 
purpose without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes 
available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic® 
Wizard CD-ROM also provides an opportunity for you to print the registration form, which you 
may mail or fax to ViewSonic.
For Your Records
Product Name:
Model Number:
Document Number:
Serial Number:
Purchase Date: PJD7383/PJD7383i/PJD7583w/PJD7583wi
ViewSonic DLP Projector
VS13339/VS13340
PJD7383/7383i/7583w/7583wi_UG_ENG
Rev. 1B
 09-22-10
_______________________________
_______________________________
The lamp in this product contains mercury which can be dangerous to you and the environment. 
Please use care and dispose of in accordance with local, state or federal laws.
ViewSonic respects the environment and is committed to working and living green.  
Thank you for being part of Smarter, Greener Computing.
Please visit ViewSonic website to learn more.
1. USA: www.viewsonic.com/company/green/
2. Europe: www.viewsoniceurope.com/uk/support/recycling-information/
3. Taiwan: recycle.epa.gov.tw/recycle/index2.aspx 
						

							
Table of contents
2
Table of contents
Important safety 
instructions ..... ..................3
Introduction .... ..................5
Projector features ................................. 5
Shipping contents ................................. 6
Projector exterior view ......................... 7
Controls and functions ......................... 8
Positioning your 
projector..........................12
Choosing a location............................ 12
Projection dimensions ........................ 13
Connection ...... ................15
Connecting a computer or monitor .... 16
Connecting Video source devices ...... 17
Playing sound through the projector .. 19
Operation ........................21
Starting up the projector..................... 21
Using the menus................................. 23
Utilizing the password function ......... 24
Switching input signal........................ 26
Adjusting the projected image ........... 27
Magnifying and searching for details. 29
Selecting the aspect ratio ................... 29
Optimizing the image......................... 31
Hiding the image ................................ 35
Locking control keys.......................... 35
Freezing the image ....... ...................... 36
Operating in a high altitude 
environment ....................................... 36
Creating your own startup screen....... 37
Setting the presentation timer ............ 38 Controlling the projector through 
a LAN environment ........................... 39
Displaying images through 
vsPresenter ......................................... 46
Displaying pictures with a USB 
storage device .................................... 50
Using the PointBlank pen 
(PJD7383i/PJD7583wi only) ............. 53
Using the projector in standby 
mode .................................................. 57
Shutting down the projector .............. 58
Menu operation .................................. 59
Maintenance ...................68
Care of the projector .......................... 68
Lamp information .............................. 69
Troubleshooting .............75
Specifications
..................76
Projector specifications...................... 76
Dimensions ........................................ 77
Ceiling mount installation ................. 77
Timing chart ...................................... 77
Copyright and Regulation 
information .....................79
Appendix .........................80
IR control table .................................. 80
RS232 command table ....................... 80 
						

							
Important safety instructions 3
Important safety instructions
Your projector is designed and tested to meet the latest standards for safety of information 
technology equipment. However, to ensure safe  use of this product, it is important that you 
follow the instructions mentioned in  this manual and marked on the product. 
Safety Instructions
1.Please read this manual before you operate your projector.  Save it for future 
reference.
2. Do not look straight at the projector lens during operation.  The intense light beam 
may damage your eyes.
3. Refer servicing to qualified service personnel.  
4. Always open the lens shutter or remove the lens cap when the projector lamp is 
on.
5. In some countries, the line voltage is NOT stable. This projector is designed to operate  safely within a mains voltage between 100  to 240 volts AC, but could fail if power 
cuts or surges of  10 volts occur.  In areas where the mains voltage may fluctuate 
or cut out, it is recommended that you connect your projector through a power 
stabilizer, surge protector or uninterruptible power supply (UPS). 
6. Do not block the projection lens with  any objects when the projector is under 
operation as this could cause the objects to become heated and deformed or even 
cause a fire. To temporarily turn off th e lamp, press BLANK on the projector or 
remote control.
7. The lamp becomes extremely hot during ope ration. Allow the projector to cool for 
approximately 45 minutes prior to rem oving the lamp assembly for replacement. 
8. Do not operate lamps beyond the rated lamp life. Excessive operation of lamps  beyond the rated life could cause them to break on rare occasions. 
9. Never replace the lamp assembly or any electronic components unless the projector is  unplugged. 
10. Do not place this product on an unstable cart, stand, or table. The product may fall,  sustaining serious damage. 
11. Do not attempt to disassemble this projector . There are dangerous high voltages inside 
which may cause death if you should come into  contact with live parts. The only user 
serviceable part is  the lamp which has its own removable cover.
Under no circumstances should you ever u ndo or remove any other covers. Refer 
servicing only to suitably qualifi ed professional service personnel.
12. Do not place this projector in any of the following environments. 
-  Space that is poorly ven tilated or confined. Allow at least 50 cm clearance from walls 
and free flow of air around the projector.
-  Locations where temperatures may become  excessively high, such as the inside of a 
car with all windows rolled up.
-  Locations where excessive humidity, dust,  or cigarette smoke may contaminate optical 
components, shortening th e projectors life span and darkening the picture.
-  Locations near fire alarms
-  Locations with an ambient  temperature above 40°C / 104°F
-  Locations where the altitudes are  higher than 3000 m (10000 feet). 
						

							
Important safety instructions
4 13. Do not block the ventilation holes. If the ve
ntilation holes are seriously obstructed, 
overheating inside the projector may result in a fire.
-  Do not place this projector on a blan ket, bedding or any other soft surface. 
-  Do not cover this projector with a cloth or any other item. 
-  Do not place inflammables near the projector.   
14. Always place the projector on a leve l, horizontal surface during operation.
-  Do not use if tilted at an angle of more than 10 degrees left  to right, nor at angle of 
more than 15 degrees front to back. Using the projector when it is not fully horizontal 
may cause a malfunction of,  or damage to, the lamp.
15. Do not stand the projector on  end vertically. Doing so may cause the projector to fall 
over, causing injury or resulting in damage to the projector.
16. Do not step on the projector or place  any objects upon it. Besides probable physical 
damage to the projector, doing so may re sult in accidents and possible injury.
17. Do not place liquids near or on the projector. Liquids spilled into the projector may  cause it to fail. If the projector does become wet, disconnect it from the power 
supplys wall socket and call your local service center to have the projector serviced.
18. This product is capable of displaying inverted pictures for ceiling mount installation. 
Use only qualified ceiling mount kit for mounting the projector and ensure it is 
securely installed. 
19. When the projector is under operation, you  may sense some heated air and odor from 
its ventilation grill. It is a normal  phenomenon and not a product defect.
20. Do not use the Security bar for transporting  or installation. It should be used with a 
commercially available theft prevention cable.
Safety instructions for  ceiling mounting of the 
projector
We want you to have a pleasant experience usi ng your projector, so we need to bring this 
safety matter to your attention to pr event damage to person and property.
If you intend to mount your projector on the  ceiling, we strongly recommend that you use a 
proper fitting projector ceiling mount kit and th at you ensure it is securely and safely 
installed.
If you use an inappropriate projector ceiling  mount kit, there is a safety risk that the 
projector may fall from the ceiling due to an  improper attachment through the use of the 
wrong gauge or length screws.
You can purchase a projector  ceiling mount kit from the place  you purchased your projector. 
We recommends that you also purchase a separa te Kensington lock compatible security 
cable and attach it securely to  both the Kensington lock slot on  the projector and the base of 
the ceiling mount bracket. This will perform th e secondary role of restraining the projector 
should its attachment to the m ounting bracket become loose.  
						

							
Introduction 5
Introduction
Projector features
The projector integrates high-performance optical engine projection and a user-friendly 
design to deliver high reliability and ease of use.
The projector offers th e following features.
• Short throw lens to create larger images wi th less distance between the projector and the 
screen
• Presentation timer for better co ntrol of time during presentations
• PointBlank pen for interactive  function (PJD7383i/PJD7583wi only)
• LAN Settings allowing management of pr ojector status from a remote compute
• LAN display available
• USB display supports computer connection  via a USB mini-B type to A type cable
• Support USB flash drive for JPEG presentation
• Support 3D DLP Link
• Color management allowing color adjustments to your liking
• 12V output ready to trigger external  device such as an electric screen
• Microphone input with 10W speaker
• Less then 1W power consumption in standby mode
• Screen Color correction allowing projection  on surfaces of several predefined colors
• Quick auto search speeding  up the signal detecting process
• Up to 8 sets of picture modes providing  multiple choices for different projection 
purposes
• One-key auto-adjustment to display the best picture quality
• Digital keystone correction  to correct distorted images
• Adjustable color balance control for data/video display
• High brightness projection lamp
• Ability to display 16.7 million colors
• Multi-language On-Screen Display (OSD) menus
• Switchable normal and economic mode s to reduce the power consumption
• Component HDTV compatibility (YP
bPr)
• PJLink™ compatible
• The apparent brightness of the projected image will vary depending on the ambient  lighting conditions, selected input signal cont rast/brightness settings, and is directly 
proportional to projection distance.
• The lamp brightness will decline over time and may vary within the lamp manufacturers  specifications. This is normal and expected behavior. 
						

							
Introduction
6
Shipping contents
Carefully unpack and verify that you have all of the items shown below. If any of these 
items are missing, please contact your place of purchase.
Standard accessories
The supplied accessories will be suitable for your region, and may differ from those 
illustrated.
Optional accessories
1. Ceiling mount
2. Replacement lamp
3. Soft carry case Projector Power Cord VGA Cable
Multi-language user manual  DVD Quick Start Guide Remote Control & Battery
PointBlank pen (PJD7383i/ PJD7583wi only) USB Cable (PJD7383i/
PJD7583wi only)