ViewSonic Pjd6353s Projector User Manual

46
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected.
The menu items are available when the projector detects at least one valid signal. If there is 
no equipment connected to the projector or no signal detected, limited menu items are 
accessible.
Main menu Sub-menu Options
1.
DISPLAY
Screen ColorOff/Blackboard/
Greenboard/Whiteboard
Aspect RatioAuto/4:3/16:9/
16:10 (
 only)
Keystone
Position
Phase
H. Size
Zoom
3D Sync  TI 3D DLP...

47
Main menu Sub-menu Options
3. SOURCE
Quick Auto Search Off/On
Color Space Conversion (PJD6223/
PJD6253/PJD6353/PJD6353s/PJD6383/
only)
RGB/YUV/Auto
DynamicEco TimerDisable/5 min/10 min/15 
min/30 min
Smart Restart Off/On
PatternPJD5126/PJD5226/PJD5226w: Off/On
PJD6223/PJD6253/PJD6353/PJD6353s/PJD6383/PJD6383s: 
01/02/03/04/05/User
PJD6553w/PJD6653w/PJD6653ws/PJD6683w/PJD6683ws: 
01/02/03/04/User
My Button
Projection (Projector Position)/3D Sync/Lamp 
Mode/DCR/Closed Caption/Auto Off (Auto Power...

48
Main menu Sub-menu Options
4.
SYSTEM
SETUP:
Basic
Message On/Off
LAN Control 
Settings
(PJD6223/PJD6253/
PJD6353/PJD6353s/
PJD6383/PJD6383s/
PJD6553w/
PJD6653w/
PJD6653ws/
PJD6683ws only)DHCP On/Off
Projector IP Address
Subnet Mask
Default Gateway
DNS Server
Apply
Standby 
SettingsPower Saving On/Off
Active VGA Out On/Off
Active Audio Out On/Off
Quick Power Off On/Off
5.
SYSTEM
SETUP:
Advanced
High Altitude Mode On/Off
DCR On/Off
Audio SettingsMute On/Off
Volume
Menu SettingsMenu Display Time5 sec/10...

49
Main menu Sub-menu Options
6. 
INFORMATIONCurrent System Status•Source
•Color Mode
•Resolution
•Color System
•Equivalent Lamp Hour
•MAC Address (PJD6223/PJD6253/
PJD6353/PJD6353s/PJD6383/PJD6383s/
PJD6553w/PJD6653w/PJD6653ws/
PJD6683w  only)
/PJD6683ws 

50
Description of each menu
Function Description
Screen ColorCorrects the projected picture’s color when the projection surface 
is not white. See "Using Screen Color" on page 33 for details.
Aspect RatioThere are three options to set the image's aspect ratio depending 
on your input signal source. See "Selecting the aspect ratio" on 
page 30 for details.
KeystoneCorrects any keystoning of the image. See "Correcting keystone" 
on page 29 for details.
Position
Displays the...

51
Function Description
Color ModePre-defined picture modes are provided so you can optimize your 
projector image set-up to suit your program type. See "Selecting a 
picture mode" on page 32 for details.
Reference
ModeSelects a picture mode that most suits your need for the image 
quality and further fine-tune the image based on the selections 
listed on the same page below. See "Setting the User 1/User 2 
mode" on page 33 for details.
BrightnessAdjusts the brightness of the image. See...

52
Function Description
Quick Auto 
SearchSee"Switching input signal" on page 27 for details.
Color Space 
ConversionSee"Changing Color Space" on page 27 for details.
DynamicEco 
TimerAllows the projector to decrease the power consumption 
automatically if no input signal is detected after a set period of time.
It takes some time to initiate this function. Make sure the 
projector has been turned on for more than 4 minutes.
Smart 
Restart
SelectingOn enables you to restart the projector...

53
Function Description
LanguageSets the language for the On-Screen Display (OSD) menus. See 
"Using the menus" on page 23 for details.
Projector 
PositionThe projector can be installed on a ceiling or behind a screen, or 
with one or more mirrors. See "Choosing a location" on page 12
for details.
Auto Power 
OffAllows the projector to turn off automatically if no input signal 
is detected after a set period of time. See "Setting Auto Power 
Off" on page 57 for details.
Blank...

54
Function Description
Audio
Settings
The sound adjustments made as below will have an effect on the 
projector speaker. Be sure you have made a correct connection to 
the projector audio input/output jacks. See "Connection" on page 
17 for more details.
Mute
Mutes the sound received from AUDIO IN 1 and AUDIO IN 2 
(L/R).
Volume
Adjusts the sound level received from AUDIO IN 1 and AUDIO 
IN 2 (L/R).
Menu 
Settings
Menu Display Time
Sets the length of time the OSD will remain active after your...

55
Function Description
Security
SettingsSee"Utilizing the password function" on page 24 for details.
Remote
Control CodeSee"Remote control code" on page 9 for details.
Reset All 
SettingsReturns all settings to the factory preset values.
The following settings will still remain: Phase, H. Size, User 
1, User 2, Language, Projector Position, High Altitude 
Mode, Security Settings.
Current
System 
Status
Source
Shows the current signal source.
Color Mode
Shows the selected mode in the...