ViewSonic Pjd5133 Projector User Manual

Connecting a Component Video source device
Examine your Video source device to determine if it has a set of unused Component 
Video output sockets available:
„If so, you can continue with this procedure.
„If not, you will need to reassess which method you can use to connect to the 
device.
To connect the projector to a Component Video source device:
1. Take a VGA (D-Sub) to HDTV (RCA) cable and connect the end with 3 RCA type 
connectors to the Component Video output sockets of the Video source device....

details.
Connecting a composite Video source device
Examine your Video source device to determine if it has a set of unused composite 
Video output sockets available:
„If so, you can continue with this procedure.
„If not, you will need to reassess which method you can use to connect to the 
device.
To connect the projector to a composite Video source device:
1. Take a Video cable and connect one end to the composite Video output socket of 
the!Video source device.
2. Connect the other end of the Video...

Operation
Powering On/Off the Projector
Powering On the Projector:
1. Complete the AC power cord and peripheral signal cable(s) connections.
2. Press   to turn on the projector.
The projector takes a minute or so to warm up. 
3. Turn on your source (computer, notebook, DVD, etc.). The projector 
automatically detects your source.
„If you are connecting multiple sources to the projector simultaneously, press 
SOURCE on the projector or Source on the remote control to select your 
desired signal or press...

Adjusting the Projector Height
The projector is equipped with an elevator foot to adjust the image height. To raise or 
lower the image, turn the elevator foot to fine-tune the height.
Adjusting the Projector Zoom and Focus
1. Focus the image by rotating the focus ring. A still image is recommended for focusing.2. Adjust the image size by rotating the zoom ring. 
Elevator foot
„To avoid damaging the projector, make sure that the elevator foot is fully 
retracted before placing the projector in its...

Adjusting Projection Image Size
Refer to the graphic and table below to determine the screen size and projection distance.
PJD5133/PJD5233
Screen size
Diagonal
[inch (cm)]4 : 3 Screen
Projection distance [inch (m)] Image 
height [inch 
(cm)]Vertical 
offset
 [inch (cm)] (min. zoom) (max. zoom)
30 (76) 45.3 (1.2) 50.6 (1.3) 18 (45.72) 2.70 (6.86)
60 (152) 92.2 (2.3) 102.9 (2.6) 36 (91.44) 5.40 (13.72)
80 (203) 123.5 (3.1) 137.7 (3.5) 48 (121.92) 7.20 (18.29)
100 (254) 154.8 (3.9) 172.5 (4.4) 60 (152.4)...

PJD5523w
Screen size
Diagonal
[inch (cm)]16 : 10 Screen
Projection distance [inch (m)] Image 
height [inch 
(cm)]Vertical 
offset
 [inch (cm)] (min. zoom) (max. zoom)
45 (114) 55.4 (1.4) 69.3 (1.8) 23.85 (60.58) 2.96 (7.51)
60 (152) 74.5 (2.0) 92.9 (2.4) 31.8 (80.77) 3.94 (10.02)
80 (203) 100.0 (2.5) 124.4 (3.2) 42.4 (107.70) 5.26 (13.35)
100 (254) 125.5 (3.2) 155.8 (4.0) 53 (134.62) 6.57 (16.69)
150 (381) 189.2 (4.8) 234.6 (6.0) 79.5 (201.93) 9.86 (25.04)
200 (508) 253.0 (6.4) 313.3 (8.0) 106 (269.24)...

Locking control keys
With the control keys on the projector locked, you can prevent your projector settings 
from being changed accidentally (by children, for example). When the Panel Key 
Lock is on, no control keys on the projector will operate except   Power.
1. Press  on the remote control.
2. A confirmation message is displayed. Select Ye s to 
confirm.
To release panel key lock:
1. Press  on the remote control.
2. A confirmation message is displayed. Select Ye s to 
confirm.
Important
„If you press...

Setting the presentation timer
The presentation timer can indicate the presentation time on the screen to help you 
achieve better time management when giving presentations. Follow these steps to 
utilize this function:
1. Go to the Option > Presentation Timer menu and press  on the projector or 
Enter on the remote control to display the Presentation Timer page.
2. Highlight Timer Period and decide the timer period by pressing  / .
Important
„If the timer is already on, the timer will restart whenever...

Menu Operation
The projector has multilingual on-screen display menus that allow you to make image 
adjustments and change a variety of settings.
Auto, 4:3, 16:9, 16:10*
26 

*16:10 for PJD5523w only
27