ViewSonic Pj510 Projector User Manual

ViewSonic  PJ51018
Using The Automatic Adjustment Feature
1Press the AUTO button.
Automatic Adjustment for RGB Input
Horizontal position (H.POS IT), vertical position (V.POSIT), clock phase 
(H.PHASE) and horizontal size (H.SIZ E) are automatically adjusted.
Make sure that the application wi ndow is set to its maximum size prior to attempting to use this 
feature. Dark pictures may stil l be incorrectly adjusted. Use a  bright screen when adjusting.
Automatic Adjustment for Video Input
The signal type...

19ViewSonic  PJ510
Using The Magnify Feature
1Press the MAGNIFY (ON) button
The projector enters MAGNIFY mode.
2Press the POSITION button, then use the ( W), ( X), ( S), ( T) buttons to select  the area to zoom. 
Press the POSITION button agai n to finalize the zoom area.
3Use the (S), ( T) buttons to adjust the zoom level
Press the MAGNIFY (OFF) button to exit MAGNIF Y mode and restore the screen to normal. 
(The projector will also automatically exit  MAGNIFY mode if there is a change in 
the input...

ViewSonic  PJ51020
Signal Searching
1Press the SEARCH button
Cycles through input signals, displaying  the images of retrieved signa ls. If no signal is found, it 
returns to the signal that was selected  before the search was initialized.
NOTE:
• May not function properly with some input signals.
• The signal searching function takes about 10 seconds to display an image.
Selecting The Aspect Ratio
1Press the ASPECT button RGB input
•At RGB input, selecting an aspect ratio may display the message “SYNC...

21ViewSonic  PJ510
Multifunctional Settings
Using The Menu Functions
This projector has the following menus: MAIN, PICTURE-1, PICTURE-2, INPUT, AUTO, 
SCREEN and OPTION. Each of these menus is operated using the same methods. The basic 
operations of these menus are as follows.
1Press the MENU button.
The menu display appears on the screen.
2Use the (S), (T) buttons to select a menu, then press the (X) or ENTER button.
The display of the selected menu appears.
3Use the (S), (T) buttons to select an item,...

ViewSonic  PJ51022
MAIN Menu
With the MAIN menu, the items shown in the Table below can be performed. 
Perform each operation in accordance with the instructions in the table below.
Item Description
KEYSTONE Adjust the Keystone (Vertical) Distortion:
Upper in the data (S)↔(T) Lower in the data
• The adjustable range of this function will vary with the type of input signal. At some signals, this 
function may not work well.
• When the V:INVERT or the H&V:INVERT is selected under the MIRROR item, if the...

23ViewSonic  PJ510
PICTURE-1 Menu
With the PICTURE-1 menu, the items shown in the Table below can be 
performed. Perform each operation in accordance with the instructions in the 
table below.
Item Description
GAMMA Select a Gamma Mode:
NORMAL(S)Q(T)CINEMA(S)Q(T)DYNAMIC(S)Q(T) CUSTOM
• Selecting the CUSTOM and then pressing the (X) or the ENTER button calls the CUSTOM 
menu.
CUSTOM Menu
Selecting one from the following and then pressing the (X) or the ENTER button performs each
function....

ViewSonic  PJ51024
PICTURE-1 Menu (Continued)
PICTURE-2 Menu
With the PICTURE-2 menu, the items shown in the Table below can be 
performed. Perform each operation in accordance with the instructions in the 
table below.
Item Description
MY MEMORY Load/Save a Setting:
Selecting one from the following and then pressing the (X) or the ENTER button performs each
function. 
LOAD1(S)Q(T)LOAD2(S)Q(T)LOAD3(S)Q(T)LOAD4(S)
(T)SAVE1(S)Q(T)SAVE2(S)Q(T)SAVE3(S)Q(T) SAVE4
• This projector has 4 memories called M1,...

25ViewSonic  PJ510
INPUT Menu
With the INPUT menu, the items shown in the Table below can be 
performed. Perform each operation in accordance with the instructions in the 
table below.
Item Description
COLOR SPACE Select a Color Space Mode:
AUTO(S)Q(T)RGB(S)Q(T)SMPTE240(S)Q(T)REC709(S)Q(T)REC601
• This item can be selected only at a RGB input or a COMPONENT VIDEO input.
• When the AUTO is selected, the optimum mode is automatically selected. However, it may not 
work well at some signals. In such a case,...

ViewSonic  PJ51026
INPUT Menu(Continued)
Item Description
VIDEO NR Select a Noise Reduction Mode:
HIGH (S) Q (T) MIDDLE (S) Q (T) LOW
• This function performs only at a VIDEO input or a S-VIDEO input. At a VIDEO input of NTSC 3.58, 
this function performs only when the TURN OFF is selected under the 3D-YCS.
• When the HIGH, the MIDDLE or the LOW is selected, the noise on screen is reduced according to 
each mode.
• When this function is excessive, it may cause a certain degradation of the picture....

27ViewSonic  PJ510
AUTO Menu
With the AUTO menu, the items shown in the Table below can be performed. 
Perform each operation in accordance with the instructions in the table below.
Item Description
ADJUST Automatically Adjust the Picture: 
Pressing the (X) or the ENTER button performs this function
At a RGB input:
• V POSITION, H POSITION, H PHASE and HSIZE are automatically adjusted. Please use this 
function with the maximum window size.
At a VIDEO input or S-VIDEO input:
• This function performs only...