ViewSonic Pj502 Projector User Manual
Have a look at the manual ViewSonic Pj502 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 617 ViewSonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ViewSonic PJ50218 At a COMPONENT VIDEO, S-VIDEO or VIDEO signal The video format best suited for the respective input signal will be selected automatically. This function is available on ly when the AUTO mode is sele cted to the item VIDEO FOR- MAT of INPUT menu. For a component video signal , the signal type is automatically iden- tified independently of this function. * The automatic adjustment ope ration requires approximately 10 seconds. Also please note that it may not functi on correctly with some input. Adjusting the position 1. Press the POSITION butt on on the remote control. The “POSITION” indication will appear on the screen. 2. Use the menu cursor buttons S/T/W/X to adjust the picture position. When you want to reset the ope ration, press the RESET button on the remote control dur- ing the operation. To complete this operation, press the POSITION button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds. * This function is availa ble only for RGB input. Correcting the keystone distortions 1 Press the KEYSTONE button on the remote control. A dialog will appear on the screen to aid you in correcting the distortion. 2. Use the menu cursor buttons S/T to correct the distortion. To close the dialog and comp lete this operation, press the KEYSTONE button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds. * This function may not be work well with some input. * The adjustable range for correc ting will vary among inputs. Using the magnify feature 1. Press the ON button of MAGNIFY on the remote control. The “MAGNIFY” indication wil l appear on the screen, and the projector will enter the MAGNIFY mode.
ViewSonic PJ50219 2. Use the menu cursor buttons S/T to adjust the zoom level. To move the zoom area, press the POSITION button in the MAGNIFY mode, the use the menu cursor buttons S/T/W/X to move the area. And to finalize the zoom area, press the POSITION button again. To exit the MAGNIFY mode and restore the screen to normal, press the OFF button of MAGNIFY on the remote control. * The projector automatically exits the MAGNIFY mode when the input signal changes, or when an operation of changing the display condition (automatic adjustment, etc.) is exe- cuted. * Although in the MAGNIFY mode, the keystone distortion condition may vary, it will be re- stored when the projector exit the MAGNIFY mode. Freezing the screen 1 Press the FREEZE button on the remote control. The “FREEZE” indication will appear on the screen, and the projector will enter the FREEZE mode. To exit the FREEZE mode and restore the screen to normal, press the FREEZE button again. * The projector automatically exits the FREEZE mode when the input signal changes, or when one of the projector’s buttons or the remote control buttons of STANDBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, VOLUME, MUTE, POSITION and MENU is pressed. * If the projector continues projecting a still image for long time, the LCD panel might pos- sibly be printed. Do not leave the projector in FREEZE mode for too long. Temporarily blanking the screen 1. Press the BLANK button on the remote control. The blank screen (refer to the item BLANK of section SCREEN menu) will be displayed instead of the screen of input signal. To remove the blank screen and return to the input signal screen, press the BLANK but- ton again. * The projector automatically returns to the input signal screen when the input signal changes, or when one of the projector’s buttons or the remote control buttons of STAND- BY/ON, SEARCH, RGB, VIDEO, FREEZE, AUTO, VOLUME, MUTE, POSITION and MENU is pressed.
ViewSonic PJ50220 Multifunctional setting Using the menu function This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, SCREEN, OP- TION and EASY MENU. Each of these menus is operated using the same methods. The ba- sic operations of these menus are as follows. 1. Press the MENU button on the remote control or one of the menu cursor buttons on the projector. The advanced MENU or EASY MENU will appear. 2. Use the menu cursor buttons S/T to select a menu. At the EASY MENU If you want to change it to the advanced MENU, select the “Go to Advanced Menu”. At the advanced MENU Select a menu of PICTURE, IMAGE, INPUT, SETUP, SCREEN or OPTION. If you want to change it to the EASY MENU, select the EASY MENU. 3. Then press the menu cursor button X or the ENTER button on the remote control to progress. The display of the selected menu will be active. 4. Use the menu cursor buttons S/T to select an item to operate. Then press the menu cur- sor button X or the ENTER button on the remote control to progress. The operation menu of the selected item will appear. 5. Use the cursor buttons S/T to operate the item. When you want to reset the operation, press the RESET button on the remote control dur- ing the operation. Note that items whose functions are performed simultaneously with op- eration (ex. LANGUAGE, H PHASE etc.) arent reset. When you want to return to the previous display, press the cursor button W. 6. Press the MENU button on the remote control again to close the menu and complete this operation. Even if you dont do anything, the dialog will automatically disappear after about 10 sec- onds.
ViewSonic PJ50221 EASY MENU With the EASY MENU, items shown in the table below can be performed. Select an item using the menu cursor buttons S/T, and press the menu cursor button X or the ENTER button on the remote control to progress. Then perform it referring to the following table. Item Description ASPECT Using the buttons W/X switches the mode for aspect ratio. See the item ASPECT of section IMAGE menu. KEYSTONEUsing the buttons W/X corrects the keystone distortion. See the item KEYSTONE of section SETUP menu. MODEUsing the buttons W/X switches the mode of picture type. The modes of picture type are combinations of a mode of GAMMA and a mode of COLOR TEMP. Choose a suitable mode according to the projected source. NORMAL
ViewSonic PJ50222 PICTURE menu With the PICTURE menu, items shown in the table below can be per- formed. Select an item using the menu cursor buttons S/T, and press the menu cursor button X or the ENTER butt on on the remote control to progress. Then perform it referring to the following table. Item Description BRIGHT Using the buttons S/T adjusts the brightness. Light Q Dark CONTRASTUsing the buttons S/T adjusts the contrast. Stro ng Q Weak GAMMAUsing the buttons S/T switches the GAMMA mode. #1 DEFAULT
ViewSonic PJ50223 COLOR TEMPUsing the buttons S/T switches the mode of color temperature. HIGH
ViewSonic PJ50224 IMAGE menu With the IMAGE menu, items shown in the table below can be performed. Select an item using th e menu cursor buttons S/T, and press the menu cursor button X or the ENTER butt on on the remote control to progress. Then perform it referring to the following table. Item Description ASPECT Using the buttons S/T switches the mode for aspect ratio. At a RGB signal 4:3
ViewSonic PJ50225 INPUT menu With the INPUT menu, items shown in the table below can be performed. Select an item using the menu cursor buttons S/T, and press the menu cursor button X or the ENTER butt on on the remote control to progress. Then perform it referring to the following table. Item Description COLOR SPACE Using the buttons S/T switches the mode for color space. AUTO
ViewSonic PJ50226 SETUP menu With the SETUP menu, items shown in the table below can be perormed. Select an item using the menu cursor buttons S/T, and press the menu cursor button X or the ENTER button on the remote control to progress. Then perform it referring to the following table. Item Description KEYSTONE Using the buttons S/T corrects the keystone distortion. Upper in the data Q Lower in the data * The adjustable range of this function will vary with the type of input signal. At some signals, this function may not work well. * When the V:INVERT or the H&V:INVERT is selected under the item MIRROR, if the projector screen is inclined or if the projector is angled downward, this function may not work correctly. * When the zoom adjustment is set to the TELE side, this correction may be excessive. This function should be used with zoom set to WIDE whenever possi- ble. WHISPER Using the buttons S/T turns off/on the whisper mode. NORMAL
ViewSonic PJ50227 SCREEN menu With the SCREEN menu, items shown in the table below can be per- formed. Select an item using the menu cursor buttons S/T, and press the menu cursor button X or the ENTER button on the remote control to progress. Then perform it referring to the following table. Item Description LANGUAGE Using the buttons S/T switches the OSD (On Screen Display) language. MENU POSI- TIONUsing the buttons W/X/S/T adjusts the menu position. To quit the operation, press the MENU button on the remote control or keep no operation for 10 seconds. OSD BRIGHT Using the buttons S/T switches the brightness level of the OSD (On Screen Display). BRIGHT