ViewSonic Pj502 Projector User Manual

ViewSonic  PJ50218
At a COMPONENT VIDEO, S-VIDEO or VIDEO signal
The video format best suited for  the respective input signal will be selected automatically.
This function is available on ly when the AUTO mode is sele cted to the item VIDEO FOR-
MAT of INPUT menu. For a component video signal , the signal type is automatically iden-
tified independently of  this function.
*  The automatic adjustment ope ration requires approximately 10 seconds. Also please 
note that it may not functi on correctly with...

ViewSonic  PJ50219
2. Use the menu cursor buttons S/T to adjust the zoom level.
To move the zoom area, press the POSITION button in the MAGNIFY mode, the use the 
menu cursor buttons 
S/T/W/X to move the area. And to finalize the zoom area, press the 
POSITION button again.
To exit the MAGNIFY mode and restore the screen to normal, press the OFF button of 
MAGNIFY on the remote control.
*  The projector automatically exits the MAGNIFY mode when the input signal changes, or 
when an operation of changing...

ViewSonic  PJ50220
Multifunctional setting
Using the menu function
This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, SCREEN, OP-
TION and EASY MENU. Each of these menus is operated using the same methods. The ba-
sic operations of these menus are as follows.
1. Press the MENU button on the remote control or one of the menu cursor buttons on the 
projector.
The advanced MENU or EASY MENU will appear.
2. Use the menu cursor buttons 
S/T to select a menu.
At the EASY MENU
If you want to...

ViewSonic  PJ50221
EASY MENU
With the EASY MENU, items shown in the table below can be performed.
Select an item using the menu cursor buttons 
S/T, and press the menu
cursor button 
X or the ENTER button on the remote control to progress.
Then perform it referring to the following table.
Item Description
ASPECT
Using the buttons W/X switches the mode for aspect ratio.
See the item ASPECT of section IMAGE menu.
KEYSTONEUsing the buttons W/X corrects the keystone distortion.
See the item KEYSTONE of...

ViewSonic  PJ50222
PICTURE menu
With the PICTURE menu, items shown in the table below can be  per-
formed.
Select an item using the menu cursor buttons 
S/T, and press the menu
cursor button 
X or the ENTER butt on on the remote control to progress.
Then perform it referring  to the following table.
Item Description
BRIGHT 
Using the buttons S/T adjusts the brightness.
Light 
Q Dark
CONTRASTUsing the buttons S/T adjusts the contrast.
Stro ng  
Q Weak
GAMMAUsing the buttons S/T switches the GAMMA mode.
#1...

ViewSonic  PJ50223
COLOR 
TEMPUsing the buttons S/T switches the mode of color temperature.
HIGH 

ViewSonic  PJ50224
IMAGE menu
With the IMAGE menu, items shown in the table below can be performed.
Select an item using th e menu cursor buttons 
S/T, and press the menu
cursor button 
X or the ENTER butt on on the remote control to progress.
Then perform it referring  to the following table.
Item Description
ASPECT
Using the buttons S/T switches the mode for aspect ratio.
At a RGB signal
4:3 

ViewSonic  PJ50225
INPUT menu
With the INPUT menu, items shown in the table below can be performed.
Select an item using the menu cursor buttons 
S/T, and press the menu
cursor button 
X or the ENTER butt on on the remote control to progress.
Then perform it referring  to the following table.
Item Description
COLOR 
SPACE
Using the buttons S/T switches the mode for color space.
AUTO 

ViewSonic  PJ50226
SETUP menu
With the SETUP menu, items shown in the table below can be perormed.
Select an item using the menu cursor buttons 
S/T, and press the menu
cursor button 
X or the ENTER button on the remote control to progress.
Then perform it referring to the following table.
Item Description
KEYSTONE
Using the buttons S/T corrects the keystone distortion.
Upper in the data 
Q Lower in the data
* The adjustable range of this function will vary with the type of input signal. At 
some...

ViewSonic  PJ50227
SCREEN menu
With the SCREEN menu, items shown in the table below can be per-
formed.
Select an item using the menu cursor buttons 
S/T, and press the menu
cursor button 
X or the ENTER button on the remote control to progress.
Then perform it referring to the following table.
Item Description
LANGUAGE
Using the buttons S/T switches the OSD (On Screen Display) language.
MENU POSI-
TIONUsing the buttons W/X/S/T adjusts the menu position.
To quit the operation, press the MENU button on...