ViewSonic N4200w Users Guide

							 
29 ViewSonic N4200w 
Audio menu 
 
 
Item Description Operation 
SoundEffect Select Sound Effect ►or◄ to select SRS Trusurround or 
OFF. 
Bass Adjust the bass. ► to increase lower-pitched sound. 
◄ to decrease lower-pitched sound. 
Treble Adjust the treble. ► to increase higher-pitched sound. 
◄ to decrease higher-pitched sound. 
Balance 
Adjust the left and right 
audio balance. 
► to emphasize the right speaker. 
◄ to emphasize the left speaker. 
 
						

							 
ViewSonic N4200w  30 
Setup menu 
 
 
Item Description Operation 
View Mode To adjust the picture ratio ►or◄ to select Normal/Wide 
FactoryPreset 
To recover the original status   
before shipping out the factory Press► for setup. 
OSD 
Language 
To select the OSD language ►or◄ to select OSD language. 
OSD Position 
To select the OSD position on 
the Display 
►or◄ to select five kinds of 
OSD position on the Display. 
Transparency 
Adjust OSD’s transparency 
level. 
► to increase the transparency 
◄ to decrease the transparency.
OSD Timer 
Out 
Adjust OSD show time. ►or◄ to select show time. 
 
 
						

							 
31 ViewSonic N4200w 
AV mode 
Picture menu 
 
Item Description Operation 
Contrast Adjust the contrast level. ► to increase the contrast. 
◄ to decrease the contrast. 
Brightness Adjust the brightness level. ► to brighten the display. 
◄ to darken the display. 
Color Adjust the color saturation ►to increase the color saturation. 
◄to decrease the color saturation. 
Tint Adjust the Hue ►to increase the Hue. 
◄to decrease the Hue. 
Sharpness Adjust the picture sharpness.► to sharpen the display. 
◄ to soften the display. 
Flesh Tone Adjust the image color   ►or◄ to select ON or OFF. 
Color Temp 
Some default color temp set 
is here. Options: STD, Warm 
and Cold 
►or ◄ to select color 
PIP 
Select OFF or Multi-picture 
functions 
►or◄ to select OFF, PBP, PIP.  
(HDMI input is not supported in sub 
picture) 
 
 
						

							 
ViewSonic N4200w  32 
Audio menu 
 
 
Item Description Operation 
SoundEffect To select sound effect ►or◄ to select SRS Trusurround or 
OFF 
Bass Adjust the bass. ► to increase lower-pitched sound. 
◄ to decrease lower-pitched sound. 
Treble Adjust the treble. ► to increase higher-pitched sound. 
◄ to decrease higher-pitched sound. 
Balance Adjust the left and right 
audio balance. 
► to emphasize the right speaker. 
◄ to emphasize the left speaker. 
 
 
						

							 
33 ViewSonic N4200w 
Setup menu 
 
 
Item Description Operation 
View Mode To adjust the picture ratio ►or◄ to select 
Smart/4:3/16:9/Zoom/Wide 
Sleep Timer To select sleep timer 
►or◄ to select 30 MIN, 60 MIN, 
90MIN, 120 MIN, 150 MIN or 
OFF. 
BlueScreen 
To select background color 
when no input. ►or◄ to select ON or OFF. 
FactoryPreset 
To recover the original status   
before shipping out the factoryPress► for setup. 
OSD Language To select the OSD language ►or◄ to select OSD language.
OSD Position 
To select the OSD position on 
the Display 
►or◄ to select five kinds of 
OSD position on the Display. 
Transparency 
Adjust OSD’s transparency 
level. 
► to increase the transparency
◄ to decrease the transparency.
OSD Timer Out Adjust OSD show time. ►or◄ to select show time. 
 
 
						

							 
ViewSonic N4200w  34 
Parental Lock 
 
 
Item Description Operation 
Lock Status 
Adjust the Parental Lock 
status ►or◄ to select on or off. 
Password Setup 
Setup the Parental Lock 
password 
press►, then enter the number 
as the password you hope. 
Rating Setup 
Setup the film rating 
classification 
press►, then select the 
classification you want and 
press OK. 
CC Setup To select Close caption ►or◄ to select Text1~4, 
CC1~4, or OFF. 
 
 
 
 
 
 
 
 
 
						

							 
35 ViewSonic N4200w 
Other Information 
Specifications 
LCD Type 42.02” view able 
 Color Filter 0.681 mm (H) x 0.227 (V) mm pixel pitch 
 Glass surface RGB vertical stripe 
  Anti-Glare 
Input signal RGB RGB analog (0.7/1.0 Vp-p, 75 ohms) 
  Separate Sync, 
  fh:30-80 kHz, fv:50-75 Hz 
 Video  D-sub x 1 ,HDMI x 2, YPbPr/YCbCr x 2, S-Video x 2,   
CVBS x 2 
 Audio Mini-stereo (Φ3.5mm x 1 ), RCA (L/R) x 4 
Compatibility PC Up to 1360 x 768 Non-interlaced 
Resolution  1360 x 768 @ 60 Hz 
Speaker Output  10W x 2 
Power Voltage 90-240 VAC, 50/60 Hz   
Display area Full Scan 930.25mm (H) x 523.01 mm (V) 
    36.62 inch (H) x 20.59 inch (V) 
Operating Temperature 32° F to + 104° F (0° C to + 40° C) 
conditions Humidity 85% (no condensation) 
 Altitude To 10,000 feet (3,000m) 
Storage Temperature -4° F to + 122° F (-20° C to + 50° C 240h) 
conditions Humidity 85% (no condensation) 
 Altitude To 40,000 feet (12,000m) 
Dimensions Physical 1243 mm (W) x 739 mm (H) x 304mm (D) 
    48.93 inch (W) x 29.09 inch (H) x 11.96 inch (D) 
Weight Net 33kg (72.68 lb) 
Regulations  FCC, UL, cUL, NOM 
Power saving On 
						

							 
ViewSonic N4200w  36 
Troubleshooting 
No power 
y Make sure the LCD Display is properly connected.   
y Make sure the AC power cord is properly connected.   
y Make sure the AC power is ON, DC power button is ON. 
y Plug another electrical device (like a radio) to the power outlet to verify that the outlet is 
supplying the proper voltage. 
Poor or no picture 
y Make sure that connection to other components is correct.   
y Make sure that setup has been done correctly after connections. 
y Make sure the correct input is selected and the input signal is compatible. 
Strange color, light color, or color misalignment 
y Ensure that the video cable is securely connected. 
y The picture may appear dim in a brightly lit room. 
y Adjust brightness and contrast. 
y Check the input signal setting. 
No Sound 
y Check your audio connections 
y The MUTE button may have been pressed, try pressing this button again. 
y Check your audio settings, your Display audio may be set to minimum. 
y Press the Volume + (Up) button on the remote control. 
Remote control unit does not operate 
y Make sure batteries are inserted correctly.   
y Batteries could be weak or dead. Replace batteries. 
y Is a fluorescent light illuminated near the remote control sensor? 
y The path of the remote control beam may be blocked. Make sure the path is clear and that 
the remote control is aimed at the remote control sensor on the Display. 
y Press only one button at a time and it is the correct one for the operation you want to 
perform. 
Unit cannot be operated 
y External influences such as lightning or static electricity may cause improper operation. 
In this case, operate the unit after first turning on the power of the LCD Display and the 
AVC System, or unplug the AC cord for 1 to 2 minutes, then replug again. 
Power is cut off suddenly 
y Is the sleep timer set?   
y The internal temperature of the unit has increased. Remove any objects blocking the vent 
or clean as necessary. 
 
						

							 
37 ViewSonic N4200w 
Picture is cut off/with sidebar screen 
y Is the image positioned correctly? 
y Are screen mode adjustments such as picture size set correctly? 
 
						

							 
ViewSonic N4200w  38 
Customer Support 
For technical support or product service, see the table below or contact your reseller. 
NOTE: You will need the product serial number. 
Contry/ 
Region Web site T = Telephone 
F = FAX Email 
United 
States www.viewsonic.com
/support/ T = (800) 688 6688 
F = (909) 468 1202 [email protected] 
Canada www.viewsonic.com/support/ T = (866) 463 4775 [email protected]