ViewSonic N2600w Users Guide

19ViewSonic N2600w 
ENGLISH5.  Connect to the PC 
VGA (15pin D-Sub): 
Connect the VGA cable from VGA output of PC to the VGA terminal input of N2600w. 
PC up to 1280 x 1024, or 1360 x 768 is the preferred resolution. 
PC Audio in: 
Connect the Audio In cable (green) from audio output of your PC to the audio input terminal 
(green) of N2600w. 
PC
VGA 15 Pin Cable 
PC
PC Audio in Cable 
(Cable not supplied)
 

ViewSonic N2600w 20 
ENGLISHHDMI:
Connect the HDMI cable from HDMI output of PC to the DVI terminal input of N2600w. 
Earphone: 
Connect Earphone from compatible devices into the earphone input at the left side of 
N2600w. 
PC
HDMI Cable (Cable not supplied) 
Earphone 
(Cable not supplied) 
 

21ViewSonic N2600w 
ENGLISH6.  Connect power cable 
Connect the power cord to the N2600w then to a properly grounded AC outlet. Turn on the 
AC Switch on the back of N2600w 
7.  Turn Power ON 
Press the Power button under the LCD TV, or press the Power On (red) button on the Remote 
Control. Turn Video source power ON. 
8.  Select input source for your LCD TV, via either OSD menu or Remote 
control
AC wall socket AC Switch
Switch to ON 
 

ViewSonic N2600w 22 
ENGLISH
Basic Operation 
To operate the function of your LCD TV, you can use your remote control or those buttons 
above your LCD TV to set input source, change channels, or adjust volume. 
Turning on the LCD TV 
Before using the LCD TV: 
1. Insert the power plug. 
2. Connect external equipment properly. 
3. Turn on the Main AC Power Switch, located on the rear of the cabinet. (If the LCD TV 
will not be used for a long period of time, please turn it off) The power LED indicator...

23ViewSonic N2600w 
ENGLISH
OSD Functions
OSD style and operation tips 
OSD Operation 
Press the “Menu” button on your remote control or right side of the LCD TV to open the OSD 
Main Menu. 
Press
x or 
z button to select the sub menu, and press
{ or 
y to enter the sub menu. 
Press
x or 
z to select the function you would like to adjust, and then press 
{ or 
y or OK to 
adjust it or execute the function. 
Press the “Menu” button on your remote control or right side of the LCD TV again to close 
the OSD...

ViewSonic N2600w 24 
ENGLISH
Picture menu 
ItemDescriptionOperation
ContrastAdjust the contrast level. 
y to increase the contrast. 

{ to decrease the contrast. 
BrightnessAdjust the brightness level. 
y to brighten the display. 

{ to darken the display. 
HueAdjust the tint level. 
y to increase the greenish tone. 

{ to increase the reddish color. 
SaturationAdjust color saturation. 
y to increase the brilliant color. 

{ to increase the pale color. 
SharpnessAdjust the picture sharpness. 
y to...

25ViewSonic N2600w 
ENGLISHSound menu 
ItemDescriptionOperation
SourceAudio setup (Main picture or 
sub picture) 
{
y to select Main or sub. 
BassAdjust the bass. 
y to increase lower-pitched sound. 

{ to decrease lower-pitched sound. 
TrebleAdjust the treble. 
y to increase higher-pitched sound. 

{ to decrease higher-pitched sound. 
BalanceAdjust the left and right audio 
balance.

y to emphasize the right speaker. 

{ to emphasize the left speaker. 
NICAM
This item is available only when 
the current...

ViewSonic N2600w 26 
ENGLISHTV menu 
ItemDescriptionOperation
Cur. Channel TV Channel Number

y or 
{: select current Channel 
Number. Default Current Channel 
Number
Channel
NameCurrent TV Channel Name 
OK: modify Name 
MENU: leave Modify Mode 

x or 
z:change the char value 

y or 
{:select char 
FrequencyCurrent TV Channel Frequency
y or 
{:change the value 
ADD/Delete 
ADD: Restores the TV channel 
previous deleted. 
Delete: Deletes the current TV 
channel.

y or 
{: select ADD or Delete....

27ViewSonic N2600w 
ENGLISHOption menu 
ItemDescriptionOperation
Sleep Timer 
Set the timer for the TV to 
automatically turn off, Available 
options are OFF, 15 Min, 30 Min, 
45 Min, and 60 Min. 

yor
{ to select OFF, 15 Min, 
30 Min, 45 Min, and 60 Min. 
Multi Picture Adjust sub picture functions 
y or 
{ enter Multi Picture 
sub menu. 
 

ViewSonic N2600w 28 
ENGLISHMulti Picture Sub Menu 
ItemDescriptionOperation
Sub Source Setting Sub picture input source.   
y or 
{ to select input source
H-Position
This item is available only if PIP is 
Selected.
Adjust the horizontal position of the 
sub picture. 

y to move toward the right. 

{ to move toward the left. 
V-Position
This item is available only if PIP is 
Selected.
Adjust the vertical position of the 
sub picture.

y to move downward. 

{ to move upward. 
Border color Sub picture...