ViewSonic N2600w Users Guide

ViewSonic N2600w
ENGLISH
Contents
Compliance Information.............................................................................................1 
Important Safety Instructions .....................................................................................2 
Copyright Information ................................................................................................3 
Product Registration...

1ViewSonic N2600w 
ENGLISH
Compliance Information
CE Conformity for European Countries 
CE Conformity
The device complies with the requirements of the EEC directive 
89/336/EEC as amended by 92/31/EEC and 93/68/EEC Art.5 with 
regard to ØElectromagnetic compatibilityÙand 73/23/EEC as 
amended by 93/68/EEC Art.13 with regard to ØSafety.Ù
User Information for all Countries 
Notice: Use the cables which are included with the unit or specified.
³
 

ViewSonic N2600w 2 
ENGLISH
Important Safety Instructions
1. Read these instructions completely before using the equipment. 
2. Keep these instructions in a safe place. 
3. Heed all warnings. 
4. Follow all instructions. 
5. Do not use this equipment near water. 
6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the LCD TV” 
in this guide for further instructions. 
7. Do not block any ventilation openings. Install the equipment in accordance with the 
manufacturer’s...

3ViewSonic N2600w 
ENGLISH
Copyright Information
Copyright © ViewSonic® Corporation, 2006. All rights reserved. 
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are re\
gistered 
trademarks of ViewSonic Corporation. 
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or 
omissions contained herein; nor for incidental or consequential damages resulting from 
furnishing this material, or the performance or use of this product. 
In the interest of...

ViewSonic N2600w 4 
ENGLISH
Antenna Installation Instructions 
1.  Outdoor Antenna Grounding 
If an outside antenna or cable system is connected to the product be sure the antenna or cable system is 
grounded so as to provide some protection against voltage surges and built-up static charges, Article 810 
of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of 
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit,...

5ViewSonic N2600w 
ENGLISH
Getting Started 
Congratulations on your purchase of a ViewSonic®LCD TV.   
Important!Save the original box and all packing material for future shipping needs. 
Package Contents 
Your LCD TV package includes: 
yLCD TV   
yPower Cable 
yRF Cable yUniversal Remote Control with batteries 
yViewSonic User Guide 
yQuick Start Guide 
³
³
³
³
 

ViewSonic N2600w 6 
ENGLISH
Setting the LCD TV on the wall 
Hanging the LCD TV on the wall requires special skill that only be performed by qualified 
service personnel. Please contact ViewSonic or your local distributor for the installation 
instruction. 
Hanging the LCD TV on the wall requires special skill that only be performed by qualified 
service personnel. Please contact ViewSonic or your local distributor for the installation 
instruction and service. Before hanging your LCD TV on the wall,...

7ViewSonic N2600w 
ENGLISH
Move loudspeaker secure 
It please arrange with ViewSonic or your local distributor to move it except the loudspeaker. 
Please carry out and operate following:   
1. Cut off the power to join.   
2. Face LCD TV below on the towel or the woolen blanket.   
3. Disassemble 9 screws in the base.   
4. Move except that the base.   
5. Disassemble 4 screws of the back loudspeaker.   
6.Exert oneself downward, remove the loudspeaker.
 

ViewSonic N2600w 8 
ENGLISHSide View of the Product 
AInput
Select the Input source.
Confirm OSD menu selection.
BVolume Up 
Increase volume or adjust a highlighted increasingly control while in OSD menu.
CVolume Down 
Decrease volume or adjust a highlighted control decreasingly while in OSD menu.
DCH Up 
Channel up/ Scroll up.
ECH Down 
Channel down/ Scroll down.
FMENU 
Turn OSD menu ON/OFF.
GPower 
Turn the power ON/OFF.