ViewSonic N2011 Users Guide

ViewSonic                                                                                                           N201 19
ENGLISH
AINPUTInput source select (for main screen)
BTVSwitch to TV when in any source
CVOL +/–Adjust volume up or down
D0~9 numberSwitch channel number buttons
ELASTReturn to previous channel
FREDMove the cursor (It is active in Name and Teletex function)
GREENIn Teletext function: move cursor up
In Name function: add desired channels
YELLOWIn Teletext function: change from...

ViewSonic                                                                                                           N201 110
ENGLISH
HOLD button
 •  Press this button to remove the information from the display and stop the automatic page 
    change which will occur if a teletext page consists of 2 or more sub pages.
 •  To continue press this button again. The number of sub pages and the sub page displayed is,  
    usually, shown on the screen below the time. When this button is pressed the stop...

ViewSonic                                                                                                           N201 1
11
ENGLISH
Installation
1. Insert Remote Control Batteries
2. Connecting RF antenna or Cable TV Wire
 
     Make sure the power is OFF before installing your LCD TV. Connect the LCD TV 
     to TV antenna wire or cable/satellite box with 75-ohm coaxial cable.
     Preset the TV channels into memory with AUTO SCAN function when using an 
     antenna or cable TV system without a...

ViewSonic                                                                                                           N201 112
ENGLISH
Stereo system
Audio in Cable(not supplied)
3. Connecting to External Stereo System to Listen to LCD TV Sound 
Connect the audio output terminal of the LCD TV to audio in terminal of the stereo 
system (stereo system sold separately).
4. Connecting to DVD/ Set Top Box
Connect Video/ Audio cables from compatible devices into the back panel of LCD TV.
1) With RCA A/V cable:...

ViewSonic                                                                                                           N201 113
ENGLISH
3) With YPbPr cable:
YPbPr Cable (not supplied)
Audio in Cable (not supplied)
VCR or DVD Player
5. Connecting with the power cord
Connect the power cord to the power cord connector on the back of your LCD  TV, 
and plug the other end of the power cord into a correctly grounded electrical outlet.
AC wall socket
4) With SCART cable:
SCART Cable
VCR or DVD Player
 

ViewSonic                                                                                                           N201 114
ENGLISH
7. Select input source for your LCD TV, via either OSD menu or
    Remote control
The Enter key of N2011 is the shortcut key for selection of input source to display.
6. Turn Power ON
Press the Power button on the top of the LCD TV, or press the Power On (red)
button on the Remote Control. Turn Video source power ON.
 

ViewSonic                                                                                                           N201 115
ENGLISH
Basic Operation
To operate your LCD TV, you may use the TV remote control or top panel buttons to 
select input source, change channels, or adjust volume.
Turning the LCD TV
Before using the LCD TV:
1. Connect external equipments properly.
2. Insert the power plug, and the power LED indicator will light orange.
Power On/Off
To turn the LCD TV on/off: 
Press POWER button on...

ViewSonic                                                                                                           N201 116
ENGLISH
Contrast: To adjust contrast of video.
Brightness: To adjust luminance of video. 
Colour: To adjust colour. 
Tint: To adjust tint level.
Sharpness: To adjust picture sharpness.
Colour Temp: To select colour Temperature by pressing ◄► — Normal, Warm, or Cool.
Picture Mode: To select picture mode by pressing ◄► — User, Standard, Movie, or Game.
  Note: You can adjust the...

ViewSonic                                                                                                           N201 117
ENGLISH
Bass: To adjust the bass.
Treble: To adjust the treble.
Balance: To adjust the left and right audio balance.
AVC: To select automatic volume control circuitry (AVC) ON or OFF.
MTS: To select the audio language.
  Note: The MTS function is active only when the input source is TV.
Auto Scan: To automatically preset the channels into TV’s memory by pressing ◄►. Kindly...

ViewSonic                                                                                                           N201 118
ENGLISH
If you want to exchange channel 1 with channel 2:
1. Move your cursor to “From” and press ◄► to select channel 1.
2. Move your cursor to “To”, and press ◄► to select channel 2. 
3. Move your cursor to “Store”, and confirm the instruction with 
ENTER.
4. Press MENU to exit.
Channel Copy: To copy the channel.
The setting procedure is the same as Channel Exchange.
Manual...