ViewSonic N2011 Users Guide

							
ViewSonic                                                                                                           N201 19
ENGLISH
AINPUTInput source select (for main screen)
BTVSwitch to TV when in any source
CVOL +/–Adjust volume up or down
D0~9 numberSwitch channel number buttons
ELASTReturn to previous channel
FREDMove the cursor (It is active in Name and Teletex function)
GREENIn Teletext function: move cursor up
In Name function: add desired channels
YELLOWIn Teletext function: change from current page to selected page       
In Name function: erase desired channels
BLUEIn Teletext function: go out from CURSOR Mode
In Name function: confirm edited name
GPOWERPower ON/OFF
HUP/ DOWN/ LEFT/
RIGHT/ ENTERUP/ DOWN/ LEFT/ RIGHT: Navigate and adjust OSD function      ENTER: Enter the function setting
IMENUOn Screen Display (OSD) menu ON/OFF
JCH ▲ and CH ▼Adjust Channel UP/DOWN
KMUTE
Volume mute ON/OFF
LINFODisplay current information
MSLEEPSet TV sleep timer
NSOUNDSelect Sound modes
OTELETEXT FUNCTION 
CONTROL buttonPlease refer to page 9~10
Remote control button function as follow
Teletext function control button
PICTURE button
 •  In MIXED Mode: Press the button again to return back to the normal  TV Screen  
    (current program).
TEXT/ MIX button
 •  In TV Mode: Press the TEXT/ MIX button to enter the Teletext mode.
 •  In TELETEXT Mode: Press the button again to superimpose a Teletext Broadcast   
    onto the screen of current TV program (mixed Mode).
 
						

							
ViewSonic                                                                                                           N201 110
ENGLISH
HOLD button
 •  Press this button to remove the information from the display and stop the automatic page 
    change which will occur if a teletext page consists of 2 or more sub pages.
 •  To continue press this button again. The number of sub pages and the sub page displayed is,  
    usually, shown on the screen below the time. When this button is pressed the stop symbol 
    is displayed at the left-top corner of the screen and the automatic changing is inhibited.
STORE button
 •  Store current page in List mode.
 •  Press the LIST button to change from FLOF system to LIST Mode.
 •  Press a coloured button corresponding to the coloured brackets on the screen for page 
    number storage.
 •  Enter the Teletext page number using the 0 ~ 9 digit buttons (enter three digits).
 •  Press the STORE button to memorize the page numbers you require.
INDEX button
 •  Press the Index button to return back to index page.
    When you press this button in teletext mode, a CURSOR appears. This cursor (rectangular box) 
    contains a page number and you can select the desired page simply by using the four colours.
 •  RED button: Move cursor down.
 •  GREEN button: Move cursor up.
 •  YELLOW button: Change from current page to selected page.
 •  BLUE button: Exit the CURSOR Mode.
LIST button
 •  Press this button you force the Teletext to LIST Mode. It means that row 24 (bottom row 
    of Teletext) will not have transmitting information, only the pages that you have previously 
    stored in the memory.
 •  Press LIST button again to exit from LIST Mode to teletext.
REVEAL button
 •  Press this button to display concealed information, such as solutions of riddles or puzzles.
 •  Press this button again to remove the information from the display .
SIZE button
Select double height text under Teletext mode for full screen.
 •  Press this button to enlarge the top half of the page.
 •  Press this button again to enlarge the bottom half of the page.
 •  Press this button again to return to the normal display.
 
						

							
ViewSonic                                                                                                           N201 1
11
ENGLISH
Installation
1. Insert Remote Control Batteries
2. Connecting RF antenna or Cable TV Wire
 
     Make sure the power is OFF before installing your LCD TV. Connect the LCD TV 
     to TV antenna wire or cable/satellite box with 75-ohm coaxial cable.
     Preset the TV channels into memory with AUTO SCAN function when using an 
     antenna or cable TV system without a cable connecter box. See page 17.
RF Cable or Adapter
1 Remove the battery cover by pulling then lifting the knob on the cover .
2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment.
3 Reattach the battery cover.
CAUTION
 •  Only use the specified AA batteries.
 •  Do not mix new and old batteries. This may result in cracking or leakage, 
    which may pose a risk of fire or lead to personal injury.
 •  Insert batteries according to (+) and (-) markings. Inserting the batteries
    incorrectly may result in cracking or leakage, which may pose a risk of fi re or  
    lead to personal injury.
 •  Dispose of the battery in accordance with local laws and regulations. 
 •  Keep the battery away from children and pets.
 •  When the remote control will not to be used for an extended period, remove  
    the batteries.
 
						

							
ViewSonic                                                                                                           N201 112
ENGLISH
Stereo system
Audio in Cable(not supplied)
3. Connecting to External Stereo System to Listen to LCD TV Sound 
Connect the audio output terminal of the LCD TV to audio in terminal of the stereo 
system (stereo system sold separately).
4. Connecting to DVD/ Set Top Box
Connect Video/ Audio cables from compatible devices into the back panel of LCD TV.
1) With RCA A/V cable:
Video Cable (not supplied)
VCR or DVD Player
2) With S-Video cable:
S-Video Cable (not supplied)
Audio in Cable (not supplied)
VCR or DVD Player
 
						

							
ViewSonic                                                                                                           N201 113
ENGLISH
3) With YPbPr cable:
YPbPr Cable (not supplied)
Audio in Cable (not supplied)
VCR or DVD Player
5. Connecting with the power cord
Connect the power cord to the power cord connector on the back of your LCD  TV, 
and plug the other end of the power cord into a correctly grounded electrical outlet.
AC wall socket
4) With SCART cable:
SCART Cable
VCR or DVD Player
 
						

							
ViewSonic                                                                                                           N201 114
ENGLISH
7. Select input source for your LCD TV, via either OSD menu or
    Remote control
The Enter key of N2011 is the shortcut key for selection of input source to display.
6. Turn Power ON
Press the Power button on the top of the LCD TV, or press the Power On (red)
button on the Remote Control. Turn Video source power ON.
 
						

							
ViewSonic                                                                                                           N201 115
ENGLISH
Basic Operation
To operate your LCD TV, you may use the TV remote control or top panel buttons to 
select input source, change channels, or adjust volume.
Turning the LCD TV
Before using the LCD TV:
1. Connect external equipments properly.
2. Insert the power plug, and the power LED indicator will light orange.
Power On/Off
To turn the LCD TV on/off: 
Press POWER button on the top of the cabinet or press POWER button on your 
remote control to turn on/off the TV. The power LED indicator lights green when the 
LCD TV is on.
Selecting input source
Repeatedly press the INPUT button on the remote control to select the required input 
source between TV, SCART, YPbPr, S-Video, or AV.
Volume Adjusting
Press VOL-/+ to adjust volume.
To silence volume, press 
MUTE.
If you want to restore volume, press MUTE again, or press VOL-/+  directly.
Channel Select
Press number buttons or CH▲▼ buttons to select the desired channels.
Ex: the desired channel is 8 → press 8 only.
Ex: the desired channel is 80 →Press 8, then press 0.
Return to previous channel, press LAST button.
Sleep Time Setting
Repeatedly press SLEEP button to set the off timer. The function is used to 
automatically shut off the LCD TV after a preset period of time passed.
There are several times for choice -- 15min, 30min, 45min, and 60min.
To cancel Sleep Time function, choose OFF.
Sound
Repeatedly press  SOUND button on the remote control to select audio language. The 
available selection include stereo, mono, SAP, etc.
Using the OSD function
You are able to use On Screen Display (OSD) menus to adjust various settings by 
using your remote control or menu button on the top of the LCD TV.
The basic operation is as following:
 •  Press MENU to display OSD menu. 
 •  Use ▲▼ to move cursor bar up and down to select OSD menu page.
 •  Press ENTER to confirm selection.
 •  Use ▲▼ to select the optional item you want to adjust.
 •  Press ◄► to adjust levels or select the items.
 •  Press MENU again to exit current OSD page.
 
						

							
ViewSonic                                                                                                           N201 116
ENGLISH
Contrast: To adjust contrast of video.
Brightness: To adjust luminance of video. 
Colour: To adjust colour. 
Tint: To adjust tint level.
Sharpness: To adjust picture sharpness.
Colour Temp: To select colour Temperature by pressing ◄► — Normal, Warm, or Cool.
Picture Mode: To select picture mode by pressing ◄► — User, Standard, Movie, or Game.
  Note: You can adjust the levels of Contrast, Brightness, Colour, Tint, and Sharpness only 
  when the Picture Mode is set to “User”.
Picture Menu 
It is active in all input sources.
Sound Menu 
When the input source is TV: When input source is SCART, YPbPr, 
S-Video or AV:
OSD Functions
 
						

							
ViewSonic                                                                                                           N201 117
ENGLISH
Bass: To adjust the bass.
Treble: To adjust the treble.
Balance: To adjust the left and right audio balance.
AVC: To select automatic volume control circuitry (AVC) ON or OFF.
MTS: To select the audio language.
  Note: The MTS function is active only when the input source is TV.
Auto Scan: To automatically preset the channels into TV’s memory by pressing ◄►. Kindly 
suggest you auto scan all the channels before watching your TV for the first time.
  Note: After auto scan all the channels, you need not to do it again when turning on your 
  TV next time.
System Select:  To select TV system signal input. (ALL, BGH, I, D/K, L, or L’) 
Channel Skip: To skip the channel. Use ▲▼ to select the channel you want to skip, and use 
◄► to select Skip or Keep. 
TV-Channel Menu 
It is only active in TV source.
Channel Exchange: To exchange the channels. 
 
						

							
ViewSonic                                                                                                           N201 118
ENGLISH
If you want to exchange channel 1 with channel 2:
1. Move your cursor to “From” and press ◄► to select channel 1.
2. Move your cursor to “To”, and press ◄► to select channel 2. 
3. Move your cursor to “Store”, and confirm the instruction with 
ENTER.
4. Press MENU to exit.
Channel Copy: To copy the channel.
The setting procedure is the same as Channel Exchange.
Manual Store: To manually scan a frequency channel and store the channel position. 
1. Press ENTER to get into “Manual Store”.
2. Move your cursor to “Search”, and search the detectable channels with ◄►.
3. Move the cursor to “System”, and select the system (ALL, BGH, I, D/K, L, L ’) according to
    your local area with ◄►. (When selecting “ALL”, L and L’ are not included.)
4. Move to “CH. NO” and use ◄► to select the desired channel.
5. Move to “Store”, then Store the instruction with ENTER. 
    Note: The channel will be stored instead of the former program.
Fine Tune: To adjust the frequency of channels in order to reduce the noise in picture. 
Press ENTER to enter Fine Tune, and press ◄► to adjust it.