ViewSonic N2010 Users Guide

E
N
G L I
S
H
ViewSonic     N2010    20
Other Information
Specifications
LCD
Panel tilt
Input signal
Speaker Output
Audio Output
Power
Display area
Operating
conditions
Storage
conditions
Dimensions
Weight
Regulations
Power
consumption Type
Color Filter
Glass surface
RF
Video
Audio
Voltage
Full Scan
Temperature
Humidity
Altitude
Temperature
Humidity
Altitude
Physical
Net
On20.1 TFT (Thin FilmTransistor) Active Matrix (640 x 480)
0.
6375  x 0.6375mm pixel pitch
RGB vertical stripe
Anti-Glare
UP: +15° ,...

E
N
G
L
I
S
H
Troubleshooting
No power
Make sure power button (or switch) is ON.
Make sure A/C power cord is securely connected to the LCD display.
Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying
proper voltage.
Power is ON but no screen image
Make sure the video cable supplied with the LCD display is tightly secured to the video output port
on the back of the Video source. If the other end of the video cable is not attached permanently to the...

E
N
G
L
I
S
H
ViewSonic     N2010    22
Customer Support
For technical support or product service, see the table below or contact your reseller.
NOTE: You will need the product serial number.
Contry/
Region
United States
CanadaWeb site
viewsonic.com/support
viewsonic.com/supportT = Telephone
F = FAX
T: (800) 688-6688
F: (909) 468-1202
T: (800) 688-6688
F: (909) 468-1202Email
service.us@
viewsonic.com
service.ca@
viewsonic.com
 

E
N
G
L
I
S
H
Limited Warranty
What the warranty covers:
ViewSonic® warrants its products to be free from defects in material and workmanship during the
warranty period. If a product proves to be defective in material or workmanship during the warranty
period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement
product or parts may include remanufactured or refurbished parts or components.
How long the warranty is effective:
ViewSonic N2010 is warranted for...

E
N
G
L
I
S
H
ViewSonic     N2010    24
Appendix
Safety Guidelines
Warming: This device must be operated with the original power supply, part number:
12VDC LSE9901B1250, 12VDC UP06031120.
CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible.
CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is
certified for the individual country. Some examples are listed below:
USA.................UL
Canada.............CSA...

E
N
G
L
I
S
H
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a resi-dential installation. This equipment generates, uses, and can radiate radio fre-
quency energy, and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that...