ViewSonic N2010 Users Guide

E
N
G L I
S
H
ViewSonic     N2010    10
Connect Video/Audio cables from compatible devices into the audio output terminal in
the back panel of N2010.
3. Connect Audio Cable
OPTIONAL:
To connect an external amplifier.
Connect the RCA audio cable from
the TV AUDIO OUT port to the
appropriate AUDIO IN port on a
compatible amplifier as shown on
the right.
Stereo system
(Cable not supplied)
Audio Cable (Cable not supplied)
Connect Video/Audio cables from compatible devices into the AV, S-Video, or YPbPr...

E
N
G L I
S
H
ViewSonic     N2010    11
VCR
Audio in Cable (Cable not supplied) S-Video Cable
(Cable not supplied)
S-Video model:
YPbPr model:
Audio in Cable (Cable not supplied)
YPbPr Cable
(Cable not supplied)
DVD Palyer or VCR
 

E
N
G L I
S
H
ViewSonic     N2010    12
Connect the power cord to the N2010 then to a properly grounded AC outlet.
4. Connect power cable
5. Turn Power ON
6.  Select input source for your LCD TV display, via either OSD menu
   or Remote control
TV key of remote control is shortcut for TV selection.
Source key of remote control is for selection among all video input sources.
AC wall socket
Press the Power button on the top of the LCD display. Or press the Power On (red)
button on the Remote Control. Turn...

E
N
G L I
S
H
OSD Functions
All the function settings for your LCD TV display are controlled either via the
remote control or using the proper buttons on the top of the front panel.
Press  MENU  key to display OSD Menu, and press  MENU key again will change
menu page. OSD menu may appear to be different, depending on the current
source input.
Source Input: TV
Picture Menu
Contrast:  To adjust the contrast ratio of the image. (right: high contrast, left: low
contrast)
Brightness:  To adjust the luminance...

E
N
G L I
S
H
ViewSonic     N2010    14 Option Menu
Caption:  To turn Closed Caption feature on/off, or select the desired type of
closed caption.
Input:  To choose a desired input source between  AV, S-Video , YPbPr  and TV.
Memory Recall:  Recall factory pre-sets.
OSD Language:  To select OSD language (English, French, or Spanish).
Sound Menu
Balance:
 To adjust the left and right audio balance.
Bass:  To adjust the audio bass.
Treble:  To adjust the audio treble.
Audio Out:  To adjust the Audio Out...

E
N
G L I
S
H
Use remote control to select  V-CHIP Blocking to set parental guidelines on or
off.
ViewSonic     N2010    15
V-Chip setting:
 To enable V-Chip functions, please enter 0000 if you have not
assigned the special password. Setup Menu
TV/CATV SELECT:  To select TV signal input between off-air and cable service.
AutoScan:  To search for available TV /CATV channels.
Channel (Add, Delete):  Use to add or skip TV channel after  Autoscan.
Parent Control:  To turn V-Chip function on/off, set desired...

E
N
G L I
S
H
ViewSonic     N2010    16 TV Ratings
The TV ratings are divided into two grounds: age-based and content-based.
Age          Defined as Age          Defined as
TV-Y
TV-Y7
TV-G TV-PG
TV-14
TV-MAAll Children
Directed to  Older Children:
this program is designed for
children age 7 and above
General Audience Parental Guidance Suggested
Parents Strongly Cautioned:
thisprogram contains some
material that is unsuitable for
children under 14 years of age
Mature Audience Only
Rating     Defined as...

E
N
G L I
S
H
ViewSonic     N2010    17
To change the password, select 
NEW PIN-Code.
Use remote control number keys to enter a 4 digit number, then press  ENTER.
Use remote control number keys to confirm the number again, then press  ENTER.
V-Chip blocked:  To enable V-Chip blocked, please enter 0000 if you have not
assigned the special password.
 

E
N
G L I
S
H
ViewSonic     N2010    18
Source Input: YPbPr, AV, S-Video
Picture Menu
Contrast:  To adjust the contrast ratio of the image level. (right: high contrast,
left: low contrast)
Brightness:  To adjust the brightness ratio of the image level. (right: Max, left:
low)
Color:  To adjust color saturation. (right: brilliant color, left: pale color)
T int:
 T o  a djust the video hue level. (right: more greenish tone, left: more
reddish tone)
Sharpness:  To adjust the picture sharpness. (right:...

E
N
G L I
S
H
Caption:  To turn Closed Caption feature on/off, or select the desired type of
closed caption.
Input:  To choose a desired input source among  AV, S-Video , YPbPr  and TV.
Memory Recall:  Recall factory pre-sets.
OSD Language:  To select OSD language (English, French, or Spanish).
Option Menu Sound Menu
Balance:
 To adjust the left and right audio balance.
Bass:  To adjust the audio bass.
Treble:  To adjust the audio treble.
Audio Out:  To adjust the Audio Out Off/On.
ViewSonic     N2010...