Home > Vidikron > Projector > Vidikron Projector Vision Model 65 User Manual

Vidikron Projector Vision Model 65 User Manual

Here you can view all the pages of manual Vidikron Projector Vision Model 65 User Manual. The Vidikron manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 81

Maintenance and Troubleshooting
Vidikron Vision Model 65/Model 75 Installation/Operation Manual 65 
LAMP LED lights solid red. The lamp has failed or 
exceeded its usage life. Replace the lamp with a 
new one. 
TEMP LED lights solid red. Vision 65/75 internal 
temperature is too high or 
one or more fans have 
failed. Power off the Vision 65/75 
and allow it to cool down. 
Ensure that the intake and 
exhaust vents are not 
blocked. Turn the projector 
back on. If the problem 
persists, please contact...

Page 82

Maintenance and Troubleshooting
66 Vidikron Vision Model 65/Model 75 Installation/Operation Manual
Notes: 

Page 83

Vidikron Vision Model 65/Model 75 Installation/Operation Manual 67 
6.1 
RS-232 Connection and 
Port Configuration
To interface the Vision 65/75 with a home theater automation/control system or a PC 
running terminal emulation software:
1. Connect it to your control system or PC as shown in Figure 3-14. 
2. Start a terminal session on your PC using a terminal-emulation program, such as 
HyperTerminal. 
3. Configure the RS-232 controller or PC serial port as follows: no parity, 8 data bits, 1 stop 
bit...

Page 84

Serial Communications
68 Vidikron Vision Model 65/Model 75 Installation/Operation Manual
X022XKeypad 2
X023XKeypad 3
X024XKeypad 4
X025XKeypad 5
X026XKeypad 6
X027XKeypad 7
X028XKeypad 8
X029XKeypad 9
X030XKeypad 0
X041XRestore image settings from Custom 1
X042XRestore image settings from Custom 2
X043XRestore image settings from ISF Day
X044XRestore image settings from ISF Night
X047XRestore all Picture Adjust Menu options to their factory-default values
X048XRestore all Setup Menu options to their...

Page 85

Serial Communications
Vidikron Vision Model 65/Model 75 Installation/Operation Manual 69 
X085XImage orientation = ceiling rear
X091XLamp Power = 170W
X092XLamp Power = 200W
X100XBlack Threshold = 0 IRE
X101XBlack Threshold = 7.5 IRE
X112XColor Temperature = 5400K
X113XColor Temperature = 6500K
X114XColor Temperature = 9300K
X115XColor Temperature = Custom 1
X116XColor Temperature = Custom 2
X121XOSD Language = English
X122XOSD Language = French
X123XOSD Language = Spanish
X124XOSD Language = German...

Page 86

Serial Communications
70 Vidikron Vision Model 65/Model 75 Installation/Operation Manual
Notes: 

Page 87

Vidikron Vision Model 65/Model 75 Installation/Operation Manual 71 
7.1 
Vision 65/75 Specifications
Table 7-1 lists the Vision 65/75 specifications.  
7Specifications
Table 7-1. Vision 65/75 Specifications 
Projector Type:Digital Light Processing (DLP), Single-Chip DMD
Native Resolution:1920 x 1080 (16:9)
Aspect Ratios:4:3, Letterbox, 16:9, IntelliWide, Cinema, IntelliWide 2.35
Video Standards:NTSC, PAL, ATSC
Video Compatibility:480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Scan Frequency:Horizontal: 15 -...

Page 88

Specifications
72 Vidikron Vision Model 65/Model 75 Installation/Operation Manual
Brightness and Contrast: Cinema Standards Measurement System (CSMS) 
Specifications – Vision Model 65 Series
- Brightness*: 13.6 to 19.6 foot-Lamberts (fL)
- Contrast Ratio*: 200:1 to 220:1
Cinema Standards Measurement System (CSMS) 
Specifications – Vision Model 75 Series
- Brightness*: 14.8 to 21.7 foot-Lamberts (fL)
- Contrast Ratio*: 200:1 to 230:1
*Variable depending on VAC setting
These measurements are taken from the...

Page 89

Specifications
Vidikron Vision Model 65/Model 75 Installation/Operation Manual 73 
Control Options:- Discrete IR remote
- Serial commands via RS-232
RS-232 Communication 
Parameters: 19200 bps, no parity, 8 data bits, 1 stop bit, no flow control 
+12V Output:Max. 0.25 Amps, active when Cinema or IntelliWide 2.35 Aspect 
Ratio is selected (CineWide versions only) or when projector is 
turned on; Tip = +12V; Sleeve = Ground
Power Requirements:100 to 240 VAC (auto-sensing), 50/60 Hz, 290 Watts 
(989.8...

Page 90

Specifications
74 Vidikron Vision Model 65/Model 75 Installation/Operation Manual
7.2 
Vision 65/75 Dimensions
Figure 7-1 shows the Vision 65/75 dimensions (all dimensions are in inches). 
Figure 7-1. Vision 65/75 Dimensions (with Optional Fixed Anamorphic Lens)
8.0
1.3
0.8
11.018.9 22.3 22.0
1.9
2.44.9
02X 2.4 6.5 15.3 19.722.0
15.3
6.7 10.8
0 3.4
2.9
18.9 17.1 15.1 1.1
2X 15.1 2X 2.1 1.2 7.9 
Start reading Vidikron Projector Vision Model 65 User Manual

Related Manuals for Vidikron Projector Vision Model 65 User Manual

All Vidikron manuals