Vidikron Projector Vision Model 30 User Manual

21Vidikron Vision Model 30 Owner’s Operating Manual

Installation
Rear screen installations
There are two basic types of rear screens: diffused and optical.
A diffusion screen has a sur face that spreads the light striking it. Purely diffused screens 
have a gain of less than 1. The main advantage of the diffused screen is its wide viewing 
angle, similar to that of a flat screen for front screen projection. This type of screen is suitable 
when a wide viewing angle is required but there is low ambient...

22Vidikron Vision Model 30 Owner’s Operating Manual

Installation
Ambient Light In general, minimize or eliminate light sources directed at the screen. Contrast ratio in 
your images will be noticeably reduced if light directly strikes the screen, such as when 
a shaft of light from a window or floodlight falls on the image. Images may then appear 
washed out and less vibrant.
Other considerations and tips that can help improve your installation:
•   Keep the ambient temperature constant and below 35°C...

23Vidikron Vision Model 30 Owner’s Operating Manual

Installation
Vertical and Horizontal  
  PositionProper placement of the projector relative to the screen will yield a rectangular, perfectly-
centered image that completely fills the screen. 
Ideally, the projector should be positioned perpendicular to the screen and in such a way 
that the lens center is aligned with either the top or bottom edge of the screen area, and 
centered horizontally.  
The top of the projected image is even with the lens...

24Vidikron Vision Model 30 Owner’s Operating Manual

Installation
MountingThere are several methods for mounting the projector. Depending on your chosen 
installation, one method may be more suitable than another. In typical front and rear 
screen installations the projector can be mounted to a secure and level sur face, such as a 
table or cart. Carts are useful when moving a projector during a presentation or from site 
to site. If possible, lock the wheels when it’s in position to prevent it from...

25Vidikron Vision Model 30 Owner’s Operating Manual

Connecting Video 
InputsWhen connecting your equipment, make sure to:
1.  Turn off all equipment before making any connections.
2.  Use the correct signal cables for each source.
3.  Ensure the cables are firmly connected.
Connections
 Video / S-Video / Component 
  (Interlaced Video)
DVD Player 

26Vidikron Vision Model 30 Owner’s Operating Manual

Connections
Progressive Component
   (DTV Y/PB/PR)
The RGB BNC input (labeled  COMP 2 / RGB) supports two kinds of HDTV formats: 
progressive component (DTV Y/PB/PR) and DTV RGB. The projector automatically detects 
the resolution.
RGBHV (DTV RGB)  
DTV Source
Red  Blue Green
DTV Source
Vert Horiz Red  Blue Green 

27Vidikron Vision Model 30 Owner’s Operating Manual

Connections
Connecting a 
Computer (GBRHV)
Connecting an HDMI™ 
Device
The projector supports the 
following computer resolutions:
 
1024x768, 800x600 and 640x480.
Use an HDMI (High-Definition Multimedia Inter face) cable to connect the projector to an 
HDMI device.
PC or Notebook 
(PC, RGB, Analog,
 
HD Component,
 
Progressive DVD)
H D M I   S o u r c e 
(DVD player or HD 
tuner with HDMI 
or DVI out)
Vert Horiz Red Blue Green 

28Vidikron Vision Model 30 Owner’s Operating Manual

Power
switch 

The Vision Model 30 ships with various types of AC power cords. Choose the one that is 
appropriate to your locale. 
Plug the female end of the power cord into the AC receptacle on the rear of the projector 
(AC 100V ~ 240V ). Then, connect the other end to your AC power source. 
Connecting to AC 
Power
Connections 

29Vidikron Vision Model 30 Owner’s Operating Manual

Removing the Lens 
Cap
Basic Operation
Focus
Zoom out
Zoom in
•  Adjust the projected image size with the  
zoom ring on the lens. To focus the image, 
rotate the focus ring on the lens.
Adjusting the Zoom 
and Focus
•  Press the lens latches together to remove 
the lens cap. 
•  To replace the cap, push it squarely over 
the lens until it snaps on. 
•  To adjust the projector height or projection 
angle, or to compensate for a mounting 
sur face...

30Vidikron Vision Model 30 Owner’s Operating Manual

Basic Operation
Selecting an Aspect 
Ratio
EXIT
L-BOX
I-WIDECINEMAC-FILL
MEM1ISFNTISFDAYDEF
123
456
7 8
9
0
PIP PIP+
PIP-
ACTIVE
PBPVAC
LIGHT
MENU
ONOFF
COMP 1
COMP 2
S-VIDVIDEO
RGB HDHDMI
ANA4X3Select an aspect ratio that suits the format of 
the video signal. The following aspect ratios are 
available.
•  ANA (Anamorphic):  A 4:3 image is stretched 
horizontally to fit a 16:9 screen. This setting is 
for 16:9 DVDs and HDT V programs.
• 4 X 3...