Vidikron Projector Vision Model 20 User Manual
Here you can view all the pages of manual Vidikron Projector Vision Model 20 User Manual. The Vidikron manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 11
Vidikron Owner’s Manual 10 English Projector Exterior ViewFront / Upper Side 1. Front Lamp Cover Remove this cover when replacing the lamp. (See page 43.) 2. Projection Lens 3. Front IR Sensor 4. Ventilation Holes (intake) 5. Ventilation Holes (exhaust) 6. Focus Ring and Zoom Ring Access Adjusts the focus and zoom of image. 7. Control Panel Shows lamp status and whether the projector is on or off. For more details, see Control Panel on page 12. 8. Kensington Lock This lock can withstand 150 N of...
Page 12
English Overview 11 Rear / Bottom Side1. Connector Panel For more details, see Connector Panel on page 14. 2. Back IR Sensor 3. AC Power IN Socket 4. AC Power Switch AC main power switch. 5. Ventilation Holes (exhaust) 6. Ventilation Holes (intake) 7. Rear Adjusters Adjusts the height or projection angle. 8. Front Adjusters Adjusts the height or projection angle. 9. Ceiling Mount Holes The connecting holes fo r ceiling mount device.
Page 14
English Overview 13 1. STANDBY/ON Press this key for ONE second to turn on the unit when it is in the standby mode. Or press this key to turn off this unit when it is on. 2. INPUT Switches input sources sequentially. 3. MEMORY Sequentially recalls settings 1 ~ 3 saved to memory. (Please see Selecting Video Memory on page 30.) 4. MENU Turns the on-screen display control menu on or off. 5. ENTER Enters settings for items shown in the menu. 6. EXIT Exits and saves the setting(s) of items...
Page 15
Vidikron Owner’s Manual 14 English Connector Panel 1. Video (RCA Jack) Composite video signal input. 2. S-Video (mini DIN 4-pin) Y/C (S-video) signal input 3. Component (RCA Jacks) 480i Component (Y/C B/CR) video signal input 4. RGB/ HDTV (BNC) or Progressive Scan DVD players DTV Y/P B/PR or DTV RGB video signal input. 5. DVI- I Digital/ Analog signal input. 6. RS-232C (RJ-11 Jack) RS-232C control signal input. 7. 12v Trigger (mini jack with the diam eter of 5.5 mm outside and 2.5 mm inside)...
Page 16
English Overview 15 Remote Control ON Hold down this button for ONE second to turn on the unit.OFFPress this button to turn off the unit. ARROW (c,e,d,f)Use to select the menu or to make various adjustments. ENTEREnter the setting of items in the menu. MEMORY M1, M2, M3, DEFAULT Recall video memory sequentially (see Selecting Video Memory on page 30) INPUT SELECT VIDEO Composite video signal inputS-VIDEOS-Video signal input COMPComponent Y/C B/CR input COMP HDDTV Y/P B/PR signal input RGB...
Page 17
Vidikron Owner’s Manual 16 English PICTURE IN PICTURE PIP (Picture in Picture) Enable the PIP function. Use ARROW keys to adjust the position of the PIP window (see PIP/ POP function on page 32)PIP+Enlarge the size of PIP window.PIP-Shrink the size of PIP window.ACTIVESwitch to the active window in PIP display mode. POP (Picture On Picture)Enable the POP function.EXITExit and save the setting(s) of items in the menu.MENUTurns on/off the on-screen display menu. ASPECT RATIO ANAMORPHIC For 16: 9...
Page 18
English Installation 17 Installation Remote Control Notes on Batteries■ Make sure that the battery polarities are correct when installing the batteries. ■ Do not mix an old battery with a new one or different types of batteries. ■ If you will not use the remote control for a long time, remove the batteries to avoid damage from battery leakage. Notes on Remote Control Operation■ Make sure that there is nothing obstructing the infrared beam between the remote control and the IR receiver on the...
Page 19
Vidikron Owner’s Manual 18 English ProjectorConnect the Power Cord Plug the supplied power cord into the AC inlet in the rear of this unit. (AC 100V ~ 240V) Turn on the main power switch on the rear of this unit (next to the AC inlet). The POWER LED will light up in orange. Press ON key on the remote control for ONE second to turn on the unit. Adjust the Lens Zoom/Focus ring Adjust the projected image size you need with the zoom ring on the lens. To focus the image, rotate the focus ring on the...
Page 20
English Installation 19 Adjust the height There are 4 screw adjusters on the bottom of this unit. You can adjust the height or projection angle of this unit by using these adjusters.