Vidikron Projector Vision Model 20 User Manual

							Vidikron Owner’s Manual
10
     
English
Projector Exterior ViewFront / Upper Side 1. Front Lamp Cover 
Remove this cover when replacing the lamp. (See page 43.)
2. Projection Lens
3. Front IR Sensor 
4. Ventilation Holes (intake)
5. Ventilation Holes (exhaust)
6. Focus Ring and Zoom Ring Access
Adjusts the focus and zoom of image.
7. Control Panel
Shows lamp status and whether the projector is on or off.
For more details, see Control Panel on page 12.
8. Kensington Lock
This lock can withstand 150 N of force.
  
						

							English
Overview   11
Rear / Bottom Side1. Connector Panel
For more details, see Connector Panel on page 14.
2. Back IR Sensor
3. AC Power IN Socket
4. AC Power Switch
AC main power switch.
5. Ventilation Holes (exhaust) 6. Ventilation Holes (intake)
7. Rear Adjusters
Adjusts the height or projection angle. 
8. Front Adjusters 
Adjusts the height or projection angle.
9. Ceiling Mount Holes
The connecting holes fo
r ceiling mount device. 
						

							Vidikron Owner’s Manual
12
     
English
Controls and FunctionsControl Panel  
						

							     
English
Overview
   13   
  
1. STANDBY/ON
Press this key for ONE second to turn on the unit when it is in the 
standby mode. Or press this key to turn off this unit when it is on.
2. INPUT 
Switches input sources sequentially.
3. MEMORY 
Sequentially recalls settings 1 ~ 3 saved to memory. (Please see 
Selecting Video Memory on page 30.)
4. MENU
Turns the on-screen display control menu on or off.
5. ENTER
Enters settings for items shown in the menu.
6. EXIT
Exits and saves the setting(s) of items in the menu.
7. ARROW (c/e/d/f)
Use to select the menu or to make various adjustments.
8. POWER LED 
Indicates power status
■
Lit orange when the AC power cord is plugged into the wall outlet 
(standby mode). Once in the standby mode, you can press the 
STANDBY/ON key on the projector or the ON key on the remote 
control for ONE second to turn on the projector.
■
Lit green when the power is turned on (operational mode).
■
Flashes orange for the first 30 seconds after powering up, indicating 
that the lamp is warming up.
■
Flashes green for one minute after the projector is turned off to 
indicate that the lamp is cooling down.
9. LAMP LED
Indicates the status of lamp.
■
Lit red when the lamp has developed a problem. Please contact your 
Vidikron dealer for assistance.
10. Zoom Ring
Adjusts the size of image 
■
Rotate clockwise to enlarge the image or rotate counterwise to make 
the image smaller.
11. Focus Ring
Adjust the focus of the projected images. 
						

							Vidikron Owner’s Manual
14
     
English
Connector Panel 
1. Video (RCA Jack) 
Composite video signal input.
2. S-Video (mini DIN 4-pin)
Y/C (S-video) signal input
3. Component (RCA Jacks)
480i Component (Y/C
B/CR) video signal input 
4. RGB/ HDTV (BNC) or Progressive Scan DVD players
DTV Y/P
B/PR or DTV RGB video signal input.
5. DVI-  I
Digital/ Analog signal input.
6. RS-232C (RJ-11 Jack)
RS-232C control signal input.
7. 12v Trigger (mini jack with the diam eter of 5.5 mm outside and 2.5 mm inside) 
+12V output, active when the projector is turned on. 
						

							     
English
Overview
   15
Remote Control 
ON Hold down this button for ONE second to turn 
on the unit.OFFPress this button to turn off the unit.
ARROW (c,e,d,f)Use to select the menu or to make various 
adjustments. ENTEREnter the setting of items in the menu.
MEMORY
M1, M2, M3, DEFAULT
Recall video memory sequentially (see Selecting 
Video Memory on page 30)
INPUT SELECT
VIDEO
Composite video signal inputS-VIDEOS-Video signal input  COMPComponent Y/C
B/CR input
COMP HDDTV Y/P
B/PR signal input
RGB HDDTV RGBHV signal inputDVIDigital/ Analog signal input 
						

							Vidikron Owner’s Manual
16
     
English
 
PICTURE IN PICTURE
PIP (Picture in Picture)
Enable the PIP function. Use ARROW keys to 
adjust the position of the PIP window (see PIP/ 
POP function on page 32)PIP+Enlarge the size of PIP window.PIP-Shrink the size of PIP window.ACTIVESwitch to the active window in PIP display 
mode. POP (Picture On Picture)Enable the POP function.EXITExit and save the setting(s) of items in the menu.MENUTurns on/off the on-screen display menu.
ASPECT RATIO
ANAMORPHIC
For 16: 9 DVDs.  4 X 3The input signal will be scaled to fit 4: 3 display 
mode in the center of screen.LETTERBOXLetterbox mode. Image in letter- box format is 
enlarged to fit 16:9 full screen display and the 
upper/lower portion are “blanked off”.I-WIDE (IntelliWide)4:3 image is enlarged nonlinearly in horizontal 
direction to fit 16: 9 full screen display.  
						

							     
English
Installation
   17
Installation
Remote Control 
Notes on Batteries■
Make sure that the battery polarities are correct when installing the batteries.
■
Do not mix an old battery with a new one or different types of batteries.
■
If you will not use the remote control for a long time, remove the batteries to avoid damage from battery leakage. 
Notes on Remote Control Operation■
Make sure that there is nothing obstructing the infrared beam between the remote control and the IR receiver on the projector.
■
The useable range is between 3m/ 9.8 feet (from the front of the projector) and 4m/ 13.1 feet (from the top of the projector) within a 
30 degree horizontal angle and 15 degree vertical angle. Push down on the tab and lift to open the cover. Install the two AAA 
batteries with the correct polarity, then close the cover.
   
						

							Vidikron Owner’s Manual
18
     
English
ProjectorConnect the Power Cord 
Plug the supplied power cord into the AC inlet in the rear of this unit. (AC 100V ~ 240V)
Turn on the main power switch on the rear of this unit (next to the AC inlet). The POWER LED 
will light up in orange. Press ON key on the remote control for ONE second to turn on the unit.
Adjust the Lens Zoom/Focus ring 
Adjust the projected image size you need with the zoom ring on the lens. 
To focus the image, rotate the focus ring on the lens.  
Focus
Zoom outZoom in 
						

							     
English
Installation
   19
Adjust the height 
There are 4 screw adjusters on the bottom of this unit. You can adjust the height or
projection angle of this unit by using these adjusters.