Home > Vidikron > Projector > Vidikron Projector Vision Model 150 User Manual

Vidikron Projector Vision Model 150 User Manual

Here you can view all the pages of manual Vidikron Projector Vision Model 150 User Manual. The Vidikron manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 101

Maintenance and Troubleshooting
Vidikron Vision Model 150 Owner’s Operating Manual 89 
PREL
IMINARY
TIPM (Image Processor)
60Boot code CRC failed. 
61Unable to program DigMux PLD. 
62Unable to program Control PLD. 
63Unable to program Bubks PLD. 
64Unrecognized ROM type. 
65Write to flash ROM failed. 
66TIPM failure. 
67Downloaded code will not fit. 
68Scaler communication problem. 
Built-In Keypad
70Unable to access EEPROM on the built-in keypad. 
71EEPROM memory re-initialization on the built-in...

Page 102

Maintenance and Troubleshooting
90 Vidikron Vision Model 150 Owner’s Operating Manual
PREL
IMINARY
Miscellaneous
A0Unable to program the optional module. 
A1Unable to power the optional module. 
A2Unable to program the Dual Slot Backplane Module (DSBP). 
A3Unable to program the optional Post Processing Module (Warp module). 
Table 5-2. Vision 150 Error Codes (continued)
Code Description
Note: To clear a system error, press the EXIT key (on the projector’s rear-panel keypad) twice. If necessary, 
reset...

Page 103

Vidikron Vision Model 150 Owner’s Operating Manual 91 
PREL
IMINARY
6.1 
RS-232 Connection and 
Port Configuration
To interface the VHD Controller with a home theater automation/control system or a PC 
running terminal emulation software, connect it to your control system or PC as shown in 
Figure 3-14. 
Configure the RS-232 controller or PC serial port as follows: no parity, 8 data bits, 1 stop bit 
and no flow control. Set the baud rate to 19200, to match that of the VHD Controller RS-232 
port. 
6.2...

Page 104

Serial Communications
92 Vidikron Vision Model 150 Owner’s Operating Manual
PREL
IMINARY
Input Selection Commands
COMPONENTNAYESSelects the Component input
COMPOSITENAYESSelects the Composite video input 
HDMI1NAYESSelects the HDMI1 input 
HDMI2NAYESSelects the HDMI2 input 
HD1NA YESSelects the RGB HD 1 input
HD2NA YESSelects the RGB HD 2 input
INPUT?NANAReturns active input
SVIDEO1NAYESSelects the S-Video 1 input
SVIDEO2NAYESSelects the S-Video 2 input
Aspect Ratio Commands
16:9NAYESSelects the...

Page 105

Serial Communications
Vidikron Vision Model 150 Owner’s Operating Manual 93 
PREL
IMINARY
Picture Adjust Commands
BRIGHTNESS-100/100YESSets a value for brightness
BRIGHTNESS?NANAReturns brightness setting value
CHROMADELAY-12/12YESSets a value for input color chroma delay
CHROMADELAY?NANAReturns input color chroma delay setting
COLOR-100/100YESSets a value for color
COLOR?NANAReturns color setting value
CONTRAST-100/100YESSets a value for contrast
CONTRAST?NANAReturns contrast setting value...

Page 106

Serial Communications
94 Vidikron Vision Model 150 Owner’s Operating Manual
PREL
IMINARY
Input Position Commands
IHEIGHT-100/100YESSets the value for input height
IHEIGHT?NANAReturns input height value
IHPOS-100/100YESSets a value for horizontal input position
IHPOS?NANAReturns input horizontal position value
IVPOS-100/100YESSets a value for vertical input position
IVPOS?NANAReturns input vertical position value
IWIDTH-100/100YESSets the value for input width 
IWIDTH?NANAReturns input horizontal width...

Page 107

Serial Communications
Vidikron Vision Model 150 Owner’s Operating Manual 95 
PREL
IMINARY
Miscellaneous Commands
BKGND-100/100YESSets the background color for letterbox or 
4:3 aspect ratio (-100 = black; 100 = white)
BKGND?NANAReturns background setting value
DATE?NANAReturns product manufacture date
DISPLAY?NANAReturns display device input source value
HDINPUTRESNAYESSets YPbPr input resolution and refresh rate 
for HD1/HD2, as follows:
0 = 480i
1 = 480p
2 = 576i
3 = 576p
4 = 720p / 60 Hz
5 = 1080i /...

Page 108

Serial Communications
96 Vidikron Vision Model 150 Owner’s Operating Manual
PREL
IMINARY
Notes: 

Page 109

Vidikron Vision Model 150 Owner’s Operating Manual 97 
PREL
IMINARY
7.1 
Vision 150 Specifications
Table 7-1 lists the Vision 150 specifications.  
7Specifications
Table 7-1. Vision 150 Specifications 
Projector Type:Digital Light Processing (DLP), 3-chip, 16:9 LightAmp™ DMD
Native Resolution:1920 x 1080 (16:9)
Aspect Ratios:Refer to Table 7-2 
Video Standards:Refer to Table 7-2 
DTV Compatibility:480p, 720p, 1080i, 1080p
Scan Frequency:Horizontal: 15 kHz to 120 kHz 
Vertical: 23.97 Hz to 150 Hz
Picture...

Page 110

Specifications
98 Vidikron Vision Model 150 Owner’s Operating Manual
PREL
IMINARY
Brightness and Contrast: Cinema Standards Measurement System (CSMS) 
Specifications
- Brightness: 102.0 foot-Lamberts (fL) 
- Contrast Ratio (variable, based on lens aperture setting):  
224:1 - 275:1
These measurements are taken from the projector in a controlled, home 
theater environment. All measurements are made to ANSI/NAPM 
IT7.228-1997 specifications using the Photo Research PR-650 
SpectraColorimeter and Minolta...
Start reading Vidikron Projector Vision Model 150 User Manual

Related Manuals for Vidikron Projector Vision Model 150 User Manual

All Vidikron manuals