Vidikron Projector Vision Model 15 User Manual

Installation
Vidikron Vision Model 15 Installation/Operation Manual 27 
S-Video/Composite Video Connections: Connect your S-Video and composite video 
sources to the Vision 15 as shown in 
Figure 3-12.
Figure 3-12. Composite and S-Video Connections
Composite   S-Video
DVD Player, VCR,
LaserDisc, Camcorder
etc. 

Installation
28 Vidikron Vision Model 15 Installation/Operation Manual
RS-232 Controller 
Connection
Use the communication cable supplied with the projector to connect a PC or home theater 
control/automation system (if present) to the RS-232 port on the Vision 15; see 
Figure 3-13. 
For more information about using this connection, refer to Serial Communications on 
page 59.
Figure 3-13. RS-232 Control System Connection
➤
876
592143
Pin   Function
2    Transmit Data (in)
3    Receive Data (out)
5...

Installation
Vidikron Vision Model 15 Installation/Operation Manual 29 
Connecting 12-Volt Trigger 
Output to External Theater 
Equipment
If your home theater contains a retractable screen, screen mask or other 12-volt 
trigger-activated equipment, connect it to the 12-volt trigger output as shown in 
Figure 3-14. 
Figure 3-14. Connecting the 12-Volt Trigger Output to Other Equipment
3.7 
Turning on the Power
1. Turn on your source components.
2. Plug the female end of the power cord into the 
AC...

Installation
30 Vidikron Vision Model 15 Installation/Operation Manual
3.8 
Changing the OSD 
Language
The Vision 15 OSD language is initially set to English, but can also display the menus in 
French, Spanish, Italian or German. To change the OSD language:
1. Press MENU.
2. Select Installation from the Main Menu and press ENTER.
3. Select Language from the Installation Menu and press ENTER.
4. Press  or  to highlight the desired language and press ENTER. 
3.9 
Adjusting the Picture 
Orientation
By...

Installation
Vidikron Vision Model 15 Installation/Operation Manual 31 
3.10 
Primary Lens Adjustments
The Vision 15 gives you a great deal of control over the picture size, position and focus. 
Figure 3-15 shows the location of the focus and zoom controls; Figure 3-16 shows the 
location of the lens shift controls. 
Focus and ZoomTo focus the projected image, rotate the focus ring left or right.
To make the picture larger (zoom in), rotate the zoom ring to the left (toward the Vidikron 
logo). To make...

Installation
32 Vidikron Vision Model 15 Installation/Operation Manual
Shift To change the projected image position, rotate the vertical and/or horizontal lens shift dials.
Figure 3-16. Vertical and Horizontal Lens Shift Controls
➤
Do not force the lens shift dials beyond their respective ranges. This may 
cause the projector to malfunction. Caution
Lens shift dial
( Horizonta l )Lens shift dial
(Vertical) 

Installation
Vidikron Vision Model 15 Installation/Operation Manual 33 
3.11 
Installing and Adjusting 
the CineWide Anamorphic 
Lens
If you are installing a Vision 15ET/CineWide, proceed as follows to install and adjust the 
anamorphic lens. 
The CineWide anamorphic lens mount kit consists of everything shown in Figure 3-17. Some 
components shipped with your projector may differ slightly from what is shown in these 
instructions. 
Figure 3-17. Anamorphic Lens Mounting Assembly - Exploded View
1. Use...

Installation
34 Vidikron Vision Model 15 Installation/Operation Manual
3. Secure the lens (with the mounting bracket attached) to the Lens Base Plate (6) using the 
swell latches. 
 
Adjusting the Lens Height and Angle: 
1. Project a white field on the screen.
2. Loosen the four Height/Pitch Adjustment Screws just enough to allow vertical 
movement of the lens assembly.
3. Slowly move the anamorphic lens into place so that there are no shadows on the top or 
bottom of the screen:
 
4. Then, adjust the...

Vidikron Vision Model 15 Installation/Operation Manual 35 
4.1 
Using the On-Screen 
Menus
 Press the MENU button on the remote control to display the Main Menu. To select a menu 
item, use the 
 and  buttons on the remote control to highlight it. Press ENTER to 
confirm your selection. 
 Use the arrow buttons to select menu items or change settings. 
 Press EXIT to return to the previous menu. 
 Press MENU to turn off the OSD menu. (When the Main Menu is displayed, pressing EXIT 
also turns off the...

Operation
36 Vidikron Vision Model 15 Installation/Operation Manual
Figure 4-1. Vision 15 OSD Menu Structure
Main MenuThe Main Menu is the starting point for accessing all projector functions. (You must enter a 
passcode to access the ISF menu.)
Source Select
Video
S-Video
Component
HDMI
DVI-D
DVI-A
Picture Adjust
Picture Memory ISF Night, ISF Day or Custom
Brightness
Contrast
Color
Tint
Sharpness 0 ... 6
Gamma 1.5, 1.8, 2.0, 2.2, 2.35, 2.5
Color Temp.5400 K, 6500 K, 7500 K or 
8500K
Color SpaceAuto,...