Vidikron Projector Vision Model 120 User Manual

Controls and Functions
Vidikron Vision Model 120 Owner’s Operating Manual 9 
PREL
IMINARY
6.RIGHT BUTTON 
Used to direct-select inputs or move the menu cursor right in the OSD. When no menu is 
present on-screen, the RIGHT button toggles through the different sources, in this order: 
 
Composite (VID) - S-Video - HD 1 (RCA) - HD 2 (BNC) - HD 3 (VGA/Y-Pb-Pr) - HDMI 1 - 
HDMI
 2
7.MENU BUTTON  
Pressing the MENU button brings up the main menu. Also, if you are in an adjustment 
mode or function, pressing...

Controls and Functions
10 Vidikron Vision Model 120 Owner’s Operating Manual
PREL
IMINARY
2.4 
VHD Controller Rear Panel
Figure 2-4 shows the rear connector panel on the VHD Controller.
Figure 2-4. VHD Controller Rear Panel
1.POWER INPUT (100 to 240 VAC) 
Connect the VHD Controller to power here. 
2.MAIN AC FUSE 
This is the main AC input fuse (5mm x 20mm, 500 mA, 250V slow-blow). 
3.MAIN POWER SWITCH 
Disconnects or applies power to the VHD Controller.
4.DVI-DL (DUAL-LINK) OUTPUT (1080p) 
Connect this...

Controls and Functions
Vidikron Vision Model 120 Owner’s Operating Manual 11 
PREL
IMINARY
9.HDMI I (1) / HDMI II (2) (Digital) 
Two, HDCP-compliant digital video inputs for connecting a DVD player, HD tuner or 
other digital video source (up to 1080p) with a DVI or HDMI output.
10.HD3 INPUT 
Provides a standard, 15-pin VGA-style connection to either an RGB or component 
high-definition source, or to a personal computer. The VHD Controller automatically 
detects the input signal resolution.
11.COMPOSITE...

Controls and Functions
12 Vidikron Vision Model 120 Owner’s Operating Manual
PREL
IMINARY
2.5 
Vision 120 Remote Control
Figure 2-5 shows the Vision 120 remote control, and the paragraphs that follow describe its 
functionality.
Figure 2-5. Vision 120 Remote Control
FOCUS   LENSZOOM
LIGHT
OFF ON
VID S-VID HDMI1
HD2SOURCE
PICTURE MEMORY
ASPECT RATIO
HD1
INFO
ENTER
EXIT MENU
BRT
CUST1 CUST2CONT COL TINTHD3HDMI2
ISF
DAY ISF
NIGHT
16:9IWIDE LBOX 4:3
CINEMAIWIDE
2.35
FOCUSZOOM
2
1
5
46 3
9
80 7
LENS
1
42
3
5...

Controls and Functions
Vidikron Vision Model 120 Owner’s Operating Manual 13 
PREL
IMINARY
1.LIGHT  
Press to illuminate the buttons. 
2.ON / OFF 
Use these buttons to turn the projector on or off.
3.Source Selection Buttons: 
 
VID 
Press to select Composite video input as the source.  
 
S-VID (S-Video) 
Press to select the S-Video input as the source.  
 
HDMI 1 (I) / HDMI 2 (II) 
Press to select an HDMI input.  
 
HD 1 / HD 2 / HD 3 
Press to select the HD 1 (RCA), HD 2 (BNC) or HD 3 (PC) video input...

Controls and Functions
14 Vidikron Vision Model 120 Owner’s Operating Manual
PREL
IMINARY
6.Memory Preset Buttons: 
 
CUST1 
Press to recall settings for the current input from the “Custom 1” memory preset.  
 
ISF NIGHT 
Press to recall settings for the current input from the “ISF Night” memory preset.  
 
ISF DAY 
Press to recall settings for the current input from the “ISF Day” memory preset. 
 
CUST2 
Press to recall settings for the current input from the “Custom 2” memory preset. 
7.Aspect Ratio...

Vidikron Vision Model 120 Owner’s Operating Manual 15 
PREL
IMINARY
3.1 
Remote Control
To install batteries in the remote control, 
press up on the battery cover retainer clip 
and lift off the cover. Install the two AAA 
batteries with the correct polarity and then 
replace the cover. 
Notes on Batteries Make sure that the battery polarities are correct when installing the batteries.
 Do not mix an old battery with a new one or different types of batteries.
 If you will not use the remote control for a...

Installation
16 Vidikron Vision Model 120 Owner’s Operating Manual
PREL
IMINARY
3.2 
Quick Setup
Table 3-1 gives a quick overview of the Vision 120 installation process. The sections following 
this one provide detailed instructions. 
Installation should be performed by a qualified custom video installation 
specialist.
Table 3-1. Installation Overview 
StepProcedureFor Details, Refer to 
page...
1Choose a location for the projector17
2
If installing a Vision 120/CineWide or Vision 
120/CineWide with...

Installation
Vidikron Vision Model 120 Owner’s Operating Manual 17 
PREL
IMINARY
3.3 
Installation Considerations
Proper installation of your projector will ensure the quality of your display. Whether you are 
installing a projector temporarily or permanently, you should take the following into account 
to ensure your projector performs optimally.
Installation TypeChoose the installation type that best suits your needs: front or rear screen, floor mount or 
inverted mount. 
Table 3-2 compares these...

Installation
18 Vidikron Vision Model 120 Owner’s Operating Manual
PREL
IMINARY
Throw DistanceThrow distance is the distance measured from the front of the projector to the screen. This is 
an important calculation in any projector installation as it determines whether or not you 
have enough room to install your projector with a desired screen size and if your image will 
be the right size for your screen.
You can quickly estimate the throw distance by taking the width of the screen and 
multiplying it...